From: Nicolas Dufresne <nicolas.dufresne@collabora.com> To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>, Philipp Zabel <p.zabel@pengutronix.de>, Mauro Carvalho Chehab <mchehab@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: nicolas@ndufresne.ca, linux-media@vger.kernel.org, Sebastian Fricke <sebastian.fricke@collabora.com>, Hans Verkuil <hverkuil-cisco@xs4all.nl>, linux-rockchip@lists.infradead.org, linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org Subject: [PATCH v5 20/20] media: hantro: Enable HOLD_CAPTURE_BUF for H.264 Date: Fri, 13 May 2022 16:29:22 -0400 [thread overview] Message-ID: <20220513202922.13846-21-nicolas.dufresne@collabora.com> (raw) In-Reply-To: <20220513202922.13846-1-nicolas.dufresne@collabora.com> This is needed to optimize field decoding. Each field will be decoded into the same capture buffer. To be able to queue multiple buffers, we need to be able to ask the driver to hold the capture buffer. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> --- drivers/staging/media/hantro/hantro_v4l2.c | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c index ed458866257a..22ad182ee972 100644 --- a/drivers/staging/media/hantro/hantro_v4l2.c +++ b/drivers/staging/media/hantro/hantro_v4l2.c @@ -408,6 +408,30 @@ hantro_update_requires_request(struct hantro_ctx *ctx, u32 fourcc) } } +static void +hantro_update_requires_hold_capture_buf(struct hantro_ctx *ctx, u32 fourcc) +{ + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + + switch (fourcc) { + case V4L2_PIX_FMT_JPEG: + case V4L2_PIX_FMT_MPEG2_SLICE: + case V4L2_PIX_FMT_VP8_FRAME: + case V4L2_PIX_FMT_HEVC_SLICE: + case V4L2_PIX_FMT_VP9_FRAME: + vq->subsystem_flags &= ~(VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF); + break; + case V4L2_PIX_FMT_H264_SLICE: + vq->subsystem_flags |= VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF; + break; + default: + break; + } +} + static int hantro_set_fmt_out(struct hantro_ctx *ctx, struct v4l2_pix_format_mplane *pix_mp) { @@ -471,6 +495,7 @@ static int hantro_set_fmt_out(struct hantro_ctx *ctx, ctx->dst_fmt.quantization = pix_mp->quantization; hantro_update_requires_request(ctx, pix_mp->pixelformat); + hantro_update_requires_hold_capture_buf(ctx, pix_mp->pixelformat); vpu_debug(0, "OUTPUT codec mode: %d\n", ctx->vpu_src_fmt->codec_mode); vpu_debug(0, "fmt - w: %d, h: %d\n", -- 2.34.3
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Dufresne <nicolas.dufresne@collabora.com> To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>, Philipp Zabel <p.zabel@pengutronix.de>, Mauro Carvalho Chehab <mchehab@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: nicolas@ndufresne.ca, linux-media@vger.kernel.org, Sebastian Fricke <sebastian.fricke@collabora.com>, Hans Verkuil <hverkuil-cisco@xs4all.nl>, linux-rockchip@lists.infradead.org, linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org Subject: [PATCH v5 20/20] media: hantro: Enable HOLD_CAPTURE_BUF for H.264 Date: Fri, 13 May 2022 16:29:22 -0400 [thread overview] Message-ID: <20220513202922.13846-21-nicolas.dufresne@collabora.com> (raw) In-Reply-To: <20220513202922.13846-1-nicolas.dufresne@collabora.com> This is needed to optimize field decoding. Each field will be decoded into the same capture buffer. To be able to queue multiple buffers, we need to be able to ask the driver to hold the capture buffer. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> --- drivers/staging/media/hantro/hantro_v4l2.c | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c index ed458866257a..22ad182ee972 100644 --- a/drivers/staging/media/hantro/hantro_v4l2.c +++ b/drivers/staging/media/hantro/hantro_v4l2.c @@ -408,6 +408,30 @@ hantro_update_requires_request(struct hantro_ctx *ctx, u32 fourcc) } } +static void +hantro_update_requires_hold_capture_buf(struct hantro_ctx *ctx, u32 fourcc) +{ + struct vb2_queue *vq; + + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + + switch (fourcc) { + case V4L2_PIX_FMT_JPEG: + case V4L2_PIX_FMT_MPEG2_SLICE: + case V4L2_PIX_FMT_VP8_FRAME: + case V4L2_PIX_FMT_HEVC_SLICE: + case V4L2_PIX_FMT_VP9_FRAME: + vq->subsystem_flags &= ~(VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF); + break; + case V4L2_PIX_FMT_H264_SLICE: + vq->subsystem_flags |= VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF; + break; + default: + break; + } +} + static int hantro_set_fmt_out(struct hantro_ctx *ctx, struct v4l2_pix_format_mplane *pix_mp) { @@ -471,6 +495,7 @@ static int hantro_set_fmt_out(struct hantro_ctx *ctx, ctx->dst_fmt.quantization = pix_mp->quantization; hantro_update_requires_request(ctx, pix_mp->pixelformat); + hantro_update_requires_hold_capture_buf(ctx, pix_mp->pixelformat); vpu_debug(0, "OUTPUT codec mode: %d\n", ctx->vpu_src_fmt->codec_mode); vpu_debug(0, "fmt - w: %d, h: %d\n", -- 2.34.3 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2022-05-13 20:30 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-13 20:29 [PATCH v5 00/20] H.264 Field Decoding Support for Frame-based Decoders Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 01/20] media: h264: Use v4l2_h264_reference for reflist Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 02/20] media: h264: Increase reference lists size to 32 Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 03/20] media: h264: Store current picture fields Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 04/20] media: h264: Store all fields into the unordered list Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 05/20] media: v4l2: Trace calculated p/b0/b1 initial reflist Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 06/20] media: h264: Sort p/b reflist using frame_num Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 07/20] media: v4l2: Reorder field reflist Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 08/20] media: rkvdec: Stop overclocking the decoder Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 09/20] media: rkvdec: h264: Fix dpb_valid implementation Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 10/20] media: rkvdec: h264: Fix bit depth wrap in pps packet Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 11/20] media: rkvdec: Move H264 SPS validation in rkvdec-h264 Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 12/20] media: rkvdec: h264: Validate and use pic width and height in mbs Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 13/20] media: rkvdec: h264: Fix reference frame_num wrap for second field Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 14/20] media: rkvdec: Ensure decoded resolution fit coded resolution Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 15/20] media: rkvdec-h264: Add field decoding support Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 16/20] media: rkvdec: Enable capture buffer holding for H264 Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 17/20] media: hantro: Stop using H.264 parameter pic_num Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 18/20] media: hantro: h264: Make dpb entry management more robust Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` [PATCH v5 19/20] media: hantro: Add H.264 field decoding support Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne 2022-05-13 20:29 ` Nicolas Dufresne [this message] 2022-05-13 20:29 ` [PATCH v5 20/20] media: hantro: Enable HOLD_CAPTURE_BUF for H.264 Nicolas Dufresne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220513202922.13846-21-nicolas.dufresne@collabora.com \ --to=nicolas.dufresne@collabora.com \ --cc=ezequiel@vanguardiasur.com.ar \ --cc=gregkh@linuxfoundation.org \ --cc=hverkuil-cisco@xs4all.nl \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux-staging@lists.linux.dev \ --cc=mchehab@kernel.org \ --cc=nicolas@ndufresne.ca \ --cc=p.zabel@pengutronix.de \ --cc=sebastian.fricke@collabora.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.