From: Stefan Wahren <stefan.wahren@i2se.com> To: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Lee Jones <lee.jones@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>, Melissa Wen <melissa.srw@gmail.com>, Phil Elwell <phil@raspberrypi.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Stefan Wahren <stefan.wahren@i2se.com> Subject: [PATCH 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support Date: Sun, 15 May 2022 22:20:21 +0200 [thread overview] Message-ID: <20220515202032.3046-1-stefan.wahren@i2se.com> (raw) This series is a split out of version 4 - Raspberry PI 4 V3D enablement send by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the power management driver. It's a rework of the less controversial changes (excluding V3D GPU driver changes) so this can be reviewed and applied faster. The changes has been tested just superficial on RPi 3B+ and 4B, so further tester are welcome. Changes since the mention series: - fix DT schema errors - make rpivid_asb register optional in DT schema - avoid code duplication in BCM2835 ASB enable/disable - rework ASB V3D handling so we don't need the V3D flag - avoid log errors for optional register - use a define for expected ASB_AXI_BRDG_ID result - fix copy & paste issues in bcm2835-pm changes [1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/ Nicolas Saenz Julienne (6): dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node mfd: bcm2835-pm: Use 'reg-names' to get resources soc: bcm: bcm2835-power: Bypass power_on/off() calls Stefan Wahren (5): dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 mfd: bcm2835-pm: Add support for BCM2711 soc: bcm: bcm2835-power: Refactor ASB control soc: bcm: bcm2835-power: Resolve ASB register macros soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB .../bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 ---------- .../bindings/soc/bcm/brcm,bcm2835-pm.yaml | 89 +++++++++++++++++++ arch/arm/boot/dts/bcm2711.dtsi | 3 +- arch/arm/boot/dts/bcm2835-common.dtsi | 1 + drivers/mfd/bcm2835-pm.c | 77 ++++++++++++---- drivers/soc/bcm/bcm2835-power.c | 72 ++++++++++----- include/linux/mfd/bcm2835-pm.h | 1 + 7 files changed, 199 insertions(+), 90 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <stefan.wahren@i2se.com> To: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Lee Jones <lee.jones@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>, Melissa Wen <melissa.srw@gmail.com>, Phil Elwell <phil@raspberrypi.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Stefan Wahren <stefan.wahren@i2se.com> Subject: [PATCH 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support Date: Sun, 15 May 2022 22:20:21 +0200 [thread overview] Message-ID: <20220515202032.3046-1-stefan.wahren@i2se.com> (raw) This series is a split out of version 4 - Raspberry PI 4 V3D enablement send by Peter Robinson [1]. It attemps to enable BCM2711 V3D support for the power management driver. It's a rework of the less controversial changes (excluding V3D GPU driver changes) so this can be reviewed and applied faster. The changes has been tested just superficial on RPi 3B+ and 4B, so further tester are welcome. Changes since the mention series: - fix DT schema errors - make rpivid_asb register optional in DT schema - avoid code duplication in BCM2835 ASB enable/disable - rework ASB V3D handling so we don't need the V3D flag - avoid log errors for optional register - use a define for expected ASB_AXI_BRDG_ID result - fix copy & paste issues in bcm2835-pm changes [1] - https://patchwork.kernel.org/project/linux-arm-kernel/cover/20220213225646.67761-1-pbrobinson@gmail.com/ Nicolas Saenz Julienne (6): dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node mfd: bcm2835-pm: Use 'reg-names' to get resources soc: bcm: bcm2835-power: Bypass power_on/off() calls Stefan Wahren (5): dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 mfd: bcm2835-pm: Add support for BCM2711 soc: bcm: bcm2835-power: Refactor ASB control soc: bcm: bcm2835-power: Resolve ASB register macros soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB .../bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 ---------- .../bindings/soc/bcm/brcm,bcm2835-pm.yaml | 89 +++++++++++++++++++ arch/arm/boot/dts/bcm2711.dtsi | 3 +- arch/arm/boot/dts/bcm2835-common.dtsi | 1 + drivers/mfd/bcm2835-pm.c | 77 ++++++++++++---- drivers/soc/bcm/bcm2835-power.c | 72 ++++++++++----- include/linux/mfd/bcm2835-pm.h | 1 + 7 files changed, 199 insertions(+), 90 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-05-15 20:21 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-15 20:20 Stefan Wahren [this message] 2022-05-15 20:20 ` [PATCH 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support Stefan Wahren 2022-05-15 20:20 ` [PATCH 01/11] dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-15 20:20 ` [PATCH 02/11] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-15 20:20 ` [PATCH 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-18 0:55 ` Rob Herring 2022-05-18 0:55 ` Rob Herring 2022-05-15 20:20 ` [PATCH 04/11] ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 12:55 ` Peter Robinson 2022-05-31 12:55 ` Peter Robinson 2022-05-15 20:20 ` [PATCH 05/11] ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 12:56 ` Peter Robinson 2022-05-31 12:56 ` Peter Robinson 2022-05-15 20:20 ` [PATCH 06/11] mfd: bcm2835-pm: Use 'reg-names' to get resources Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 14:54 ` Peter Robinson 2022-05-31 14:54 ` Peter Robinson 2022-05-31 17:12 ` Stefan Wahren 2022-05-31 17:12 ` Stefan Wahren 2022-05-15 20:20 ` [PATCH 07/11] mfd: bcm2835-pm: Add support for BCM2711 Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 15:08 ` Peter Robinson 2022-05-31 15:08 ` Peter Robinson 2022-05-31 17:27 ` Stefan Wahren 2022-05-31 17:27 ` Stefan Wahren 2022-05-31 20:11 ` Peter Robinson 2022-05-31 20:11 ` Peter Robinson 2022-05-31 22:03 ` Stefan Wahren 2022-05-31 22:03 ` Stefan Wahren 2022-06-01 11:09 ` Peter Robinson 2022-06-01 11:09 ` Peter Robinson 2022-05-15 20:20 ` [PATCH 08/11] soc: bcm: bcm2835-power: Refactor ASB control Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 15:18 ` Peter Robinson 2022-05-31 15:18 ` Peter Robinson 2022-05-15 20:20 ` [PATCH 09/11] soc: bcm: bcm2835-power: Resolve ASB register macros Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 15:47 ` Peter Robinson 2022-05-31 15:47 ` Peter Robinson 2022-05-31 17:34 ` Stefan Wahren 2022-05-31 17:34 ` Stefan Wahren 2022-05-15 20:20 ` [PATCH 10/11] soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 15:58 ` Peter Robinson 2022-05-31 15:58 ` Peter Robinson 2022-05-15 20:20 ` [PATCH 11/11] soc: bcm: bcm2835-power: Bypass power_on/off() calls Stefan Wahren 2022-05-15 20:20 ` Stefan Wahren 2022-05-31 16:03 ` Peter Robinson 2022-05-31 16:03 ` Peter Robinson 2022-05-18 20:22 ` [PATCH 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support Florian Fainelli 2022-05-18 20:22 ` Florian Fainelli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220515202032.3046-1-stefan.wahren@i2se.com \ --to=stefan.wahren@i2se.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=maxime@cerno.tech \ --cc=melissa.srw@gmail.com \ --cc=nsaenz@kernel.org \ --cc=pbrobinson@gmail.com \ --cc=phil@raspberrypi.com \ --cc=rjui@broadcom.com \ --cc=sbranden@broadcom.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.