From: David Heidelberg <david@ixit.cz>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: David Heidelberg <david@ixit.cz>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] arm64: dts: qcom: timer should use only 32-bit size
Date: Mon, 16 May 2022 00:17:57 +0200 [thread overview]
Message-ID: <20220515221758.88723-1-david@ixit.cz> (raw)
There's no reason the timer needs > 32-bits of size.
Since we using 32-bit size, we need to define ranges properly.
Fixes warnings as:
```
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: timer@17c90000: #size-cells:0:0: 1 was expected
From schema: Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
```
Signed-off-by: David Heidelberg <david@ixit.cz>
---
Replaces "dt-bindings: timer: add #size-cells 2 for ARM"
v2: fix accidental change of value 0x0 to 0
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sc7180.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sc7280.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sdm845.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sm6350.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sm8150.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sm8250.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sm8350.dtsi | 20 ++++++++++----------
arch/arm64/boot/dts/qcom/sm8450.dtsi | 20 ++++++++++----------
9 files changed, 90 insertions(+), 90 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index c89499e366d3..8638231dbd2f 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -526,8 +526,8 @@ timer {
timer@b120000 {
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x10000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x0b120000 0x0 0x1000>;
@@ -535,49 +535,49 @@ frame@b120000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b121000 0x0 0x1000>,
- <0x0 0x0b122000 0x0 0x1000>;
+ reg = <0x0 0x0b121000 0x1000>,
+ <0x0 0x0b122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0xb123000 0x0 0x1000>;
+ reg = <0x0 0x0b123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b124000 0x0 0x1000>;
+ reg = <0x0 0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b125000 0x0 0x1000>;
+ reg = <0x0 0x0b125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b126000 0x0 0x1000>;
+ reg = <0x0 0x0b126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b127000 0x0 0x1000>;
+ reg = <0x0 0x0b127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b128000 0x0 0x1000>;
+ reg = <0x0 0x0b128000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 5dcaac23a138..4b7be66e04df 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3385,8 +3385,8 @@ watchdog@17c10000 {
timer@17c20000{
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c20000 0 0x1000>;
@@ -3394,49 +3394,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c21000 0 0x1000>,
- <0 0x17c22000 0 0x1000>;
+ reg = <0 0x17c21000 0x1000>,
+ <0 0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c23000 0 0x1000>;
+ reg = <0 0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c25000 0 0x1000>;
+ reg = <0 0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c27000 0 0x1000>;
+ reg = <0 0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c29000 0 0x1000>;
+ reg = <0 0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2b000 0 0x1000>;
+ reg = <0 0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2d000 0 0x1000>;
+ reg = <0 0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index e66fc67de206..1b81cd1e84e9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4772,8 +4772,8 @@ watchdog@17c10000 {
timer@17c20000 {
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c20000 0 0x1000>;
@@ -4781,49 +4781,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c21000 0 0x1000>,
- <0 0x17c22000 0 0x1000>;
+ reg = <0 0x17c21000 0x1000>,
+ <0 0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c23000 0 0x1000>;
+ reg = <0 0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c25000 0 0x1000>;
+ reg = <0 0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c27000 0 0x1000>;
+ reg = <0 0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c29000 0 0x1000>;
+ reg = <0 0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2b000 0 0x1000>;
+ reg = <0 0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2d000 0 0x1000>;
+ reg = <0 0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0692ae0e60a4..9a1705bfa425 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4949,8 +4949,8 @@ slimbam: dma-controller@17184000 {
timer@17c90000 {
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c90000 0 0x1000>;
@@ -4958,49 +4958,49 @@ frame@17ca0000 {
frame-number = <0>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17ca0000 0 0x1000>,
- <0 0x17cb0000 0 0x1000>;
+ reg = <0 0x17ca0000 0x1000>,
+ <0 0x17cb0000 0x1000>;
};
frame@17cc0000 {
frame-number = <1>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cc0000 0 0x1000>;
+ reg = <0 0x17cc0000 0x1000>;
status = "disabled";
};
frame@17cd0000 {
frame-number = <2>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cd0000 0 0x1000>;
+ reg = <0 0x17cd0000 0x1000>;
status = "disabled";
};
frame@17ce0000 {
frame-number = <3>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17ce0000 0 0x1000>;
+ reg = <0 0x17ce0000 0x1000>;
status = "disabled";
};
frame@17cf0000 {
frame-number = <4>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cf0000 0 0x1000>;
+ reg = <0 0x17cf0000 0x1000>;
status = "disabled";
};
frame@17d00000 {
frame-number = <5>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17d00000 0 0x1000>;
+ reg = <0 0x17d00000 0x1000>;
status = "disabled";
};
frame@17d10000 {
frame-number = <6>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17d10000 0 0x1000>;
+ reg = <0 0x17d10000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d4f8f33f3f0c..fc473cb8c93b 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1305,56 +1305,56 @@ timer@17c20000 {
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x0 0x17c21000 0x1000>,
+ <0x0 0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x0 0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x0 0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x0 0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x0 0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x0 0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x0 0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 8ea44c4b56b4..066cc00191b2 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3945,8 +3945,8 @@ watchdog@17c10000 {
timer@17c20000 {
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -3955,49 +3955,49 @@ frame@17c21000{
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x0 0x17c21000 0x1000>,
+ <0x0 0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x0 0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x0 0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c26000 0x0 0x1000>;
+ reg = <0x0 0x17c26000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x0 0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x0 0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x0 0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index cf0c97bd5ad3..ae7d0573e1dc 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4868,8 +4868,8 @@ watchdog@17c10000 {
timer@17c20000 {
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -4878,49 +4878,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x0 0x17c21000 0x1000>,
+ <0x0 0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x0 0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x0 0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x0 0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x0 0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x0 0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x0 0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 743cba9b683c..58e6bb4a1899 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1934,8 +1934,8 @@ intc: interrupt-controller@17a00000 {
timer@17c20000 {
compatible = "arm,armv7-timer-mem";
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -1943,49 +1943,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x0 0x17c21000 0x1000>,
+ <0x0 0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x0 0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x0 0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x0 0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x0 0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x0 0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x0 0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 7d08fad76371..64ceff515337 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2858,8 +2858,8 @@ intc: interrupt-controller@17100000 {
timer@17420000 {
compatible = "arm,armv7-timer-mem";
#address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #size-cells = <1>;
+ ranges = <0 0 0 0 0x20000000>;
reg = <0x0 0x17420000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -2867,49 +2867,49 @@ frame@17421000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17421000 0x0 0x1000>,
- <0x0 0x17422000 0x0 0x1000>;
+ reg = <0x0 0x17421000 0x1000>,
+ <0x0 0x17422000 0x1000>;
};
frame@17423000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17423000 0x0 0x1000>;
+ reg = <0x0 0x17423000 0x1000>;
status = "disabled";
};
frame@17425000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17425000 0x0 0x1000>;
+ reg = <0x0 0x17425000 0x1000>;
status = "disabled";
};
frame@17427000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17427000 0x0 0x1000>;
+ reg = <0x0 0x17427000 0x1000>;
status = "disabled";
};
frame@17429000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17429000 0x0 0x1000>;
+ reg = <0x0 0x17429000 0x1000>;
status = "disabled";
};
frame@1742b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x1742b000 0x0 0x1000>;
+ reg = <0x0 0x1742b000 0x1000>;
status = "disabled";
};
frame@1742d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x1742d000 0x0 0x1000>;
+ reg = <0x0 0x1742d000 0x1000>;
status = "disabled";
};
};
--
2.35.1
next reply other threads:[~2022-05-15 22:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-15 22:17 David Heidelberg [this message]
2022-06-26 3:12 ` [PATCH v2] arm64: dts: qcom: timer should use only 32-bit size Bjorn Andersson
2022-06-26 9:51 ` David Heidelberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220515221758.88723-1-david@ixit.cz \
--to=david@ixit.cz \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.