All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Subject: [PATCH] ALSA: usb-audio: Refcount multiple accesses on the single clock
Date: Mon, 16 May 2022 12:48:07 +0200	[thread overview]
Message-ID: <20220516104807.16482-1-tiwai@suse.de> (raw)

When a clock source is connected to multiple nodes / endpoints, the
current USB-audio driver tries to set up at each time one of them is
configured.  Although it reads the current rate and updates only if it
differs, some devices seem unhappy with this behavior and spew the
errors when reading/updating the rate unnecessarily.

This patch tries to reduce the redundant clock setup by introducing a
refcount for each clock source.  When the stream is actually running,
a clock rate is "locked", and it bypasses the clock and/or refuse to
change any longer.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215934
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/card.c     |  1 +
 sound/usb/card.h     |  3 +-
 sound/usb/endpoint.c | 90 +++++++++++++++++++++++++++++++++++++++-----
 sound/usb/usbaudio.h |  1 +
 4 files changed, 85 insertions(+), 10 deletions(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 376962291c4d..0fff96a5d3ab 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -635,6 +635,7 @@ static int snd_usb_audio_create(struct usb_interface *intf,
 	INIT_LIST_HEAD(&chip->pcm_list);
 	INIT_LIST_HEAD(&chip->ep_list);
 	INIT_LIST_HEAD(&chip->iface_ref_list);
+	INIT_LIST_HEAD(&chip->clock_ref_list);
 	INIT_LIST_HEAD(&chip->midi_list);
 	INIT_LIST_HEAD(&chip->mixer_list);
 
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 87f042d06ce0..ca75f2206170 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -44,6 +44,7 @@ struct audioformat {
 
 struct snd_usb_substream;
 struct snd_usb_iface_ref;
+struct snd_usb_clock_ref;
 struct snd_usb_endpoint;
 struct snd_usb_power_domain;
 
@@ -62,6 +63,7 @@ struct snd_urb_ctx {
 struct snd_usb_endpoint {
 	struct snd_usb_audio *chip;
 	struct snd_usb_iface_ref *iface_ref;
+	struct snd_usb_clock_ref *clock_ref;
 
 	int opened;		/* open refcount; protect with chip->mutex */
 	atomic_t running;	/* running status */
@@ -138,7 +140,6 @@ struct snd_usb_endpoint {
 	unsigned int cur_period_frames;
 	unsigned int cur_period_bytes;
 	unsigned int cur_buffer_periods;
-	unsigned char cur_clock;
 
 	spinlock_t lock;
 	struct list_head list;
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 743b8287cfcd..df5a70013a85 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -35,6 +35,14 @@ struct snd_usb_iface_ref {
 	struct list_head list;
 };
 
+/* clock refcounting */
+struct snd_usb_clock_ref {
+	unsigned char clock;
+	atomic_t locked;
+	int rate;
+	struct list_head list;
+};
+
 /*
  * snd_usb_endpoint is a model that abstracts everything related to an
  * USB endpoint and its streaming.
@@ -591,6 +599,25 @@ iface_ref_find(struct snd_usb_audio *chip, int iface)
 	return ip;
 }
 
+/* Similarly, a refcount object for clock */
+static struct snd_usb_clock_ref *
+clock_ref_find(struct snd_usb_audio *chip, int clock)
+{
+	struct snd_usb_clock_ref *ref;
+
+	list_for_each_entry(ref, &chip->clock_ref_list, list)
+		if (ref->clock == clock)
+			return ref;
+
+	ref = kzalloc(sizeof(*ref), GFP_KERNEL);
+	if (!ref)
+		return NULL;
+	ref->clock = clock;
+	atomic_set(&ref->locked, 0);
+	list_add_tail(&ref->list, &chip->clock_ref_list);
+	return ref;
+}
+
 /*
  * Get the existing endpoint object corresponding EP
  * Returns NULL if not present.
@@ -768,6 +795,14 @@ snd_usb_endpoint_open(struct snd_usb_audio *chip,
 			goto unlock;
 		}
 
+		if (fp->protocol != UAC_VERSION_1) {
+			ep->clock_ref = clock_ref_find(chip, fp->clock);
+			if (!ep->clock_ref) {
+				ep = NULL;
+				goto unlock;
+			}
+		}
+
 		ep->cur_audiofmt = fp;
 		ep->cur_channels = fp->channels;
 		ep->cur_rate = params_rate(params);
@@ -777,7 +812,6 @@ snd_usb_endpoint_open(struct snd_usb_audio *chip,
 		ep->cur_period_frames = params_period_size(params);
 		ep->cur_period_bytes = ep->cur_period_frames * ep->cur_frame_bytes;
 		ep->cur_buffer_periods = params_periods(params);
-		ep->cur_clock = fp->clock;
 
 		if (ep->type == SND_USB_ENDPOINT_TYPE_SYNC)
 			endpoint_set_syncinterval(chip, ep);
@@ -894,8 +928,8 @@ void snd_usb_endpoint_close(struct snd_usb_audio *chip,
 		ep->altsetting = 0;
 		ep->cur_audiofmt = NULL;
 		ep->cur_rate = 0;
-		ep->cur_clock = 0;
 		ep->iface_ref = NULL;
+		ep->clock_ref = NULL;
 		usb_audio_dbg(chip, "EP 0x%x closed\n", ep->ep_num);
 	}
 	mutex_unlock(&chip->mutex);
@@ -907,6 +941,8 @@ void snd_usb_endpoint_suspend(struct snd_usb_endpoint *ep)
 	ep->need_setup = true;
 	if (ep->iface_ref)
 		ep->iface_ref->need_setup = true;
+	if (ep->clock_ref)
+		ep->clock_ref->rate = 0;
 }
 
 /*
@@ -1314,6 +1350,33 @@ static int snd_usb_endpoint_set_params(struct snd_usb_audio *chip,
 	return 0;
 }
 
+static int init_sample_rate(struct snd_usb_audio *chip,
+			    struct snd_usb_endpoint *ep)
+{
+	struct snd_usb_clock_ref *clock = ep->clock_ref;
+	int err;
+
+	if (clock) {
+		if (atomic_read(&clock->locked))
+			return 0;
+		if (clock->rate == ep->cur_rate)
+			return 0;
+		if (clock->rate && clock->rate != ep->cur_rate) {
+			usb_audio_dbg(chip, "Mismatched sample rate %d vs %d for EP 0x%x\n",
+				      clock->rate, ep->cur_rate, ep->ep_num);
+			return -EINVAL;
+		}
+	}
+
+	err = snd_usb_init_sample_rate(chip, ep->cur_audiofmt, ep->cur_rate);
+	if (err < 0)
+		return err;
+
+	if (clock)
+		clock->rate = ep->cur_rate;
+	return 0;
+}
+
 /*
  * snd_usb_endpoint_configure: Configure the endpoint
  *
@@ -1343,8 +1406,7 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
 		 * to update at each EP configuration
 		 */
 		if (ep->cur_audiofmt->protocol == UAC_VERSION_1) {
-			err = snd_usb_init_sample_rate(chip, ep->cur_audiofmt,
-						       ep->cur_rate);
+			err = init_sample_rate(chip, ep);
 			if (err < 0)
 				goto unlock;
 		}
@@ -1374,7 +1436,7 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
 	if (err < 0)
 		goto unlock;
 
-	err = snd_usb_init_sample_rate(chip, ep->cur_audiofmt, ep->cur_rate);
+	err = init_sample_rate(chip, ep);
 	if (err < 0)
 		goto unlock;
 
@@ -1407,15 +1469,15 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
 /* get the current rate set to the given clock by any endpoint */
 int snd_usb_endpoint_get_clock_rate(struct snd_usb_audio *chip, int clock)
 {
-	struct snd_usb_endpoint *ep;
+	struct snd_usb_clock_ref *ref;
 	int rate = 0;
 
 	if (!clock)
 		return 0;
 	mutex_lock(&chip->mutex);
-	list_for_each_entry(ep, &chip->ep_list, list) {
-		if (ep->cur_clock == clock && ep->cur_rate) {
-			rate = ep->cur_rate;
+	list_for_each_entry(ref, &chip->clock_ref_list, list) {
+		if (ref->clock == clock) {
+			rate = ref->rate;
 			break;
 		}
 	}
@@ -1456,6 +1518,9 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
 	if (atomic_inc_return(&ep->running) != 1)
 		return 0;
 
+	if (ep->clock_ref)
+		atomic_inc(&ep->clock_ref->locked);
+
 	ep->active_mask = 0;
 	ep->unlink_mask = 0;
 	ep->phase = 0;
@@ -1565,6 +1630,9 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, bool keep_pending)
 		if (ep->sync_source)
 			WRITE_ONCE(ep->sync_source->sync_sink, NULL);
 		stop_urbs(ep, false, keep_pending);
+		if (ep->clock_ref)
+			if (!atomic_dec_return(&ep->clock_ref->locked))
+				ep->clock_ref->rate = 0;
 	}
 }
 
@@ -1591,12 +1659,16 @@ void snd_usb_endpoint_free_all(struct snd_usb_audio *chip)
 {
 	struct snd_usb_endpoint *ep, *en;
 	struct snd_usb_iface_ref *ip, *in;
+	struct snd_usb_clock_ref *cp, *cn;
 
 	list_for_each_entry_safe(ep, en, &chip->ep_list, list)
 		kfree(ep);
 
 	list_for_each_entry_safe(ip, in, &chip->iface_ref_list, list)
 		kfree(ip);
+
+	list_for_each_entry_safe(cp, cn, &chip->clock_ref_list, list)
+		kfree(ip);
 }
 
 /*
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 044cd7ab27cb..ffbb4b0d09a0 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -45,6 +45,7 @@ struct snd_usb_audio {
 	struct list_head pcm_list;	/* list of pcm streams */
 	struct list_head ep_list;	/* list of audio-related endpoints */
 	struct list_head iface_ref_list; /* list of interface refcounts */
+	struct list_head clock_ref_list; /* list of clock refcounts */
 	int pcm_devs;
 
 	struct list_head midi_list;	/* list of midi interfaces */
-- 
2.35.3


             reply	other threads:[~2022-05-16 10:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16 10:48 Takashi Iwai [this message]
2022-09-05  9:58 ` [PATCH] ALSA: usb-audio: Refcount multiple accesses on the single clock Jason A. Donenfeld
2022-09-05 10:14   ` Jason A. Donenfeld

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220516104807.16482-1-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.