All of lore.kernel.org
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe@baylibre.com>
To: andrew@lunn.ch, broonie@kernel.org, calvin.johnson@oss.nxp.com,
	davem@davemloft.net, edumazet@google.com, hkallweit1@gmail.com,
	jernej.skrabec@gmail.com, krzysztof.kozlowski+dt@linaro.org,
	kuba@kernel.org, lgirdwood@gmail.com, linux@armlinux.org.uk,
	pabeni@redhat.com, robh+dt@kernel.org, samuel@sholland.org,
	wens@csie.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev,
	netdev@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v2 3/5] phy: handle optional regulator for PHY
Date: Wed, 18 May 2022 20:09:37 +0000	[thread overview]
Message-ID: <20220518200939.689308-4-clabbe@baylibre.com> (raw)
In-Reply-To: <20220518200939.689308-1-clabbe@baylibre.com>

Add handling of optional regulators for PHY.
Regulators need to be enabled before PHY scanning, so MDIO bus
initiate this task.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/net/mdio/Kconfig       |  1 +
 drivers/net/mdio/fwnode_mdio.c | 34 ++++++++++++++++++++++++++++++----
 drivers/net/phy/phy_device.c   | 10 ++++++++++
 include/linux/phy.h            |  3 +++
 4 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index bfa16826a6e1..3f8098fac74b 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -22,6 +22,7 @@ config MDIO_BUS
 config FWNODE_MDIO
 	def_tristate PHYLIB
 	depends on (ACPI || OF) || COMPILE_TEST
+	depends on REGULATOR
 	select FIXED_PHY
 	help
 	  FWNODE MDIO bus (Ethernet PHY) accessors
diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index 1c1584fca632..c97ccb0863f9 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -10,6 +10,7 @@
 #include <linux/fwnode_mdio.h>
 #include <linux/of.h>
 #include <linux/phy.h>
+#include <linux/regulator/consumer.h>
 
 MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
 MODULE_LICENSE("GPL");
@@ -94,7 +95,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	struct phy_device *phy;
 	bool is_c45 = false;
 	u32 phy_id;
-	int rc;
+	int rc, reg_cnt = 0;
+	struct regulator_bulk_data *consumers;
+	struct device_node *nchild = NULL;
+	u32 reg;
 
 	mii_ts = fwnode_find_mii_timestamper(child);
 	if (IS_ERR(mii_ts))
@@ -105,15 +109,33 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	if (rc >= 0)
 		is_c45 = true;
 
+	for_each_child_of_node(bus->dev.of_node, nchild) {
+		of_property_read_u32(nchild, "reg", &reg);
+		if (reg != addr)
+			continue;
+		reg_cnt = regulator_bulk_get_all(&bus->dev, nchild, &consumers);
+		if (reg_cnt > 0) {
+			rc = regulator_bulk_enable(reg_cnt, consumers);
+			if (rc)
+				return rc;
+		} else {
+			dev_err(&bus->dev, "Fail to regulator_bulk_get_all err=%d\n", reg_cnt);
+		}
+	}
+
 	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
 		phy = get_phy_device(bus, addr, is_c45);
 	else
 		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
 	if (IS_ERR(phy)) {
 		unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
+		rc = PTR_ERR(phy);
+		goto error;
 	}
 
+	phy->regulator_cnt = reg_cnt;
+	phy->consumers = consumers;
+
 	if (is_acpi_node(child)) {
 		phy->irq = bus->irq[addr];
 
@@ -127,14 +149,14 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 		if (rc) {
 			phy_device_free(phy);
 			fwnode_handle_put(phy->mdio.dev.fwnode);
-			return rc;
+			goto error;
 		}
 	} else if (is_of_node(child)) {
 		rc = fwnode_mdiobus_phy_device_register(bus, phy, child, addr);
 		if (rc) {
 			unregister_mii_timestamper(mii_ts);
 			phy_device_free(phy);
-			return rc;
+			goto error;
 		}
 	}
 
@@ -145,5 +167,9 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	if (mii_ts)
 		phy->mii_ts = mii_ts;
 	return 0;
+error:
+	if (reg_cnt > 0)
+		regulator_bulk_disable(reg_cnt, consumers);
+	return rc;
 }
 EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 431a8719c635..711919e40ef7 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -27,6 +27,7 @@
 #include <linux/phy.h>
 #include <linux/phy_led_triggers.h>
 #include <linux/property.h>
+#include <linux/regulator/consumer.h>
 #include <linux/sfp.h>
 #include <linux/skbuff.h>
 #include <linux/slab.h>
@@ -1785,6 +1786,9 @@ int phy_suspend(struct phy_device *phydev)
 	if (!ret)
 		phydev->suspended = true;
 
+	if (phydev->regulator_cnt > 0)
+		regulator_bulk_disable(phydev->regulator_cnt, phydev->consumers);
+
 	return ret;
 }
 EXPORT_SYMBOL(phy_suspend);
@@ -1811,6 +1815,12 @@ int phy_resume(struct phy_device *phydev)
 {
 	int ret;
 
+	if (phydev->regulator_cnt > 0) {
+		ret = regulator_bulk_enable(phydev->regulator_cnt, phydev->consumers);
+		if (ret)
+			return ret;
+	}
+
 	mutex_lock(&phydev->lock);
 	ret = __phy_resume(phydev);
 	mutex_unlock(&phydev->lock);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 508f1149665b..ef4e0ce67194 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -704,6 +704,9 @@ struct phy_device {
 	void (*phy_link_change)(struct phy_device *phydev, bool up);
 	void (*adjust_link)(struct net_device *dev);
 
+	int regulator_cnt;
+	struct regulator_bulk_data *consumers;
+
 #if IS_ENABLED(CONFIG_MACSEC)
 	/* MACsec management functions */
 	const struct macsec_ops *macsec_ops;
-- 
2.35.1


WARNING: multiple messages have this Message-ID (diff)
From: Corentin Labbe <clabbe@baylibre.com>
To: andrew@lunn.ch, broonie@kernel.org, calvin.johnson@oss.nxp.com,
	davem@davemloft.net, edumazet@google.com, hkallweit1@gmail.com,
	jernej.skrabec@gmail.com, krzysztof.kozlowski+dt@linaro.org,
	kuba@kernel.org, lgirdwood@gmail.com, linux@armlinux.org.uk,
	pabeni@redhat.com, robh+dt@kernel.org, samuel@sholland.org,
	wens@csie.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev,
	netdev@vger.kernel.org, Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v2 3/5] phy: handle optional regulator for PHY
Date: Wed, 18 May 2022 20:09:37 +0000	[thread overview]
Message-ID: <20220518200939.689308-4-clabbe@baylibre.com> (raw)
In-Reply-To: <20220518200939.689308-1-clabbe@baylibre.com>

Add handling of optional regulators for PHY.
Regulators need to be enabled before PHY scanning, so MDIO bus
initiate this task.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/net/mdio/Kconfig       |  1 +
 drivers/net/mdio/fwnode_mdio.c | 34 ++++++++++++++++++++++++++++++----
 drivers/net/phy/phy_device.c   | 10 ++++++++++
 include/linux/phy.h            |  3 +++
 4 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index bfa16826a6e1..3f8098fac74b 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -22,6 +22,7 @@ config MDIO_BUS
 config FWNODE_MDIO
 	def_tristate PHYLIB
 	depends on (ACPI || OF) || COMPILE_TEST
+	depends on REGULATOR
 	select FIXED_PHY
 	help
 	  FWNODE MDIO bus (Ethernet PHY) accessors
diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index 1c1584fca632..c97ccb0863f9 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -10,6 +10,7 @@
 #include <linux/fwnode_mdio.h>
 #include <linux/of.h>
 #include <linux/phy.h>
+#include <linux/regulator/consumer.h>
 
 MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
 MODULE_LICENSE("GPL");
@@ -94,7 +95,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	struct phy_device *phy;
 	bool is_c45 = false;
 	u32 phy_id;
-	int rc;
+	int rc, reg_cnt = 0;
+	struct regulator_bulk_data *consumers;
+	struct device_node *nchild = NULL;
+	u32 reg;
 
 	mii_ts = fwnode_find_mii_timestamper(child);
 	if (IS_ERR(mii_ts))
@@ -105,15 +109,33 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	if (rc >= 0)
 		is_c45 = true;
 
+	for_each_child_of_node(bus->dev.of_node, nchild) {
+		of_property_read_u32(nchild, "reg", &reg);
+		if (reg != addr)
+			continue;
+		reg_cnt = regulator_bulk_get_all(&bus->dev, nchild, &consumers);
+		if (reg_cnt > 0) {
+			rc = regulator_bulk_enable(reg_cnt, consumers);
+			if (rc)
+				return rc;
+		} else {
+			dev_err(&bus->dev, "Fail to regulator_bulk_get_all err=%d\n", reg_cnt);
+		}
+	}
+
 	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
 		phy = get_phy_device(bus, addr, is_c45);
 	else
 		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
 	if (IS_ERR(phy)) {
 		unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
+		rc = PTR_ERR(phy);
+		goto error;
 	}
 
+	phy->regulator_cnt = reg_cnt;
+	phy->consumers = consumers;
+
 	if (is_acpi_node(child)) {
 		phy->irq = bus->irq[addr];
 
@@ -127,14 +149,14 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 		if (rc) {
 			phy_device_free(phy);
 			fwnode_handle_put(phy->mdio.dev.fwnode);
-			return rc;
+			goto error;
 		}
 	} else if (is_of_node(child)) {
 		rc = fwnode_mdiobus_phy_device_register(bus, phy, child, addr);
 		if (rc) {
 			unregister_mii_timestamper(mii_ts);
 			phy_device_free(phy);
-			return rc;
+			goto error;
 		}
 	}
 
@@ -145,5 +167,9 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	if (mii_ts)
 		phy->mii_ts = mii_ts;
 	return 0;
+error:
+	if (reg_cnt > 0)
+		regulator_bulk_disable(reg_cnt, consumers);
+	return rc;
 }
 EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 431a8719c635..711919e40ef7 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -27,6 +27,7 @@
 #include <linux/phy.h>
 #include <linux/phy_led_triggers.h>
 #include <linux/property.h>
+#include <linux/regulator/consumer.h>
 #include <linux/sfp.h>
 #include <linux/skbuff.h>
 #include <linux/slab.h>
@@ -1785,6 +1786,9 @@ int phy_suspend(struct phy_device *phydev)
 	if (!ret)
 		phydev->suspended = true;
 
+	if (phydev->regulator_cnt > 0)
+		regulator_bulk_disable(phydev->regulator_cnt, phydev->consumers);
+
 	return ret;
 }
 EXPORT_SYMBOL(phy_suspend);
@@ -1811,6 +1815,12 @@ int phy_resume(struct phy_device *phydev)
 {
 	int ret;
 
+	if (phydev->regulator_cnt > 0) {
+		ret = regulator_bulk_enable(phydev->regulator_cnt, phydev->consumers);
+		if (ret)
+			return ret;
+	}
+
 	mutex_lock(&phydev->lock);
 	ret = __phy_resume(phydev);
 	mutex_unlock(&phydev->lock);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 508f1149665b..ef4e0ce67194 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -704,6 +704,9 @@ struct phy_device {
 	void (*phy_link_change)(struct phy_device *phydev, bool up);
 	void (*adjust_link)(struct net_device *dev);
 
+	int regulator_cnt;
+	struct regulator_bulk_data *consumers;
+
 #if IS_ENABLED(CONFIG_MACSEC)
 	/* MACsec management functions */
 	const struct macsec_ops *macsec_ops;
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-05-18 20:09 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-18 20:09 [PATCH v2 0/5] arm64: add ethernet to orange pi 3 Corentin Labbe
2022-05-18 20:09 ` Corentin Labbe
2022-05-18 20:09 ` [PATCH v2 1/5] regulator: Add of_get_regulator_from_list Corentin Labbe
2022-05-18 20:09   ` Corentin Labbe
2022-05-18 20:09 ` [PATCH v2 2/5] regulator: Add regulator_bulk_get_all Corentin Labbe
2022-05-18 20:09   ` Corentin Labbe
2022-05-18 20:09 ` Corentin Labbe [this message]
2022-05-18 20:09   ` [PATCH v2 3/5] phy: handle optional regulator for PHY Corentin Labbe
2022-05-18 20:09 ` [PATCH v2 4/5] dt-bindings: net: Add documentation for optional regulators Corentin Labbe
2022-05-18 20:09   ` Corentin Labbe
2022-05-19  0:08   ` Rob Herring
2022-05-19  0:08     ` Rob Herring
2022-05-19  9:55   ` Krzysztof Kozlowski
2022-05-19  9:55     ` Krzysztof Kozlowski
2022-05-19 11:31     ` Mark Brown
2022-05-19 11:31       ` Mark Brown
2022-05-19 11:33       ` Krzysztof Kozlowski
2022-05-19 11:33         ` Krzysztof Kozlowski
2022-05-19 11:58         ` Andrew Lunn
2022-05-19 11:58           ` Andrew Lunn
2022-05-19 15:49           ` Mark Brown
2022-05-19 15:49             ` Mark Brown
2022-05-20  7:57             ` Krzysztof Kozlowski
2022-05-20  7:57               ` Krzysztof Kozlowski
2022-05-20  8:15               ` LABBE Corentin
2022-05-20  8:15                 ` LABBE Corentin
2022-05-20 10:19                 ` Krzysztof Kozlowski
2022-05-20 10:19                   ` Krzysztof Kozlowski
2022-05-19 20:17           ` Rob Herring
2022-05-19 20:17             ` Rob Herring
2022-05-18 20:09 ` [PATCH v2 5/5] arm64: dts: allwinner: orange-pi-3: Enable ethernet Corentin Labbe
2022-05-18 20:09   ` Corentin Labbe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220518200939.689308-4-clabbe@baylibre.com \
    --to=clabbe@baylibre.com \
    --cc=andrew@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=calvin.johnson@oss.nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.