From: Sunil V L <sunilvl@ventanamicro.com> To: Ard Biesheuvel <ardb@kernel.org>, Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>, Atish Patra <atishp@rivosinc.com>, Anup Patel <apatel@ventanamicro.com>, Jessica Clarke <jrtc27@jrtc27.com>, Abner Chang <abner.chang@hpe.com>, linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org, Sunil V L <sunilvl@ventanamicro.com>, Palmer Dabbelt <palmer@rivosinc.com>, Sunil V L <sunil.vl@gmail.com> Subject: [PATCH V5 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL Date: Thu, 19 May 2022 10:45:12 +0530 [thread overview] Message-ID: <20220519051512.136724-2-sunilvl@ventanamicro.com> (raw) In-Reply-To: <20220519051512.136724-1-sunilvl@ventanamicro.com> This patch adds the support for getting the boot hart ID in Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol is preferred method over existing DT based solution since it works irrespective of DT or ACPI. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> --- drivers/firmware/efi/libstub/efistub.h | 7 +++++ drivers/firmware/efi/libstub/riscv-stub.c | 31 ++++++++++++++++++----- include/linux/efi.h | 1 + 3 files changed, 33 insertions(+), 6 deletions(-) diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index edb77b0621ea..87aa66e8ef43 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -720,6 +720,13 @@ union efi_tcg2_protocol { } mixed_mode; }; +struct riscv_efi_boot_protocol { + u64 revision; + + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, + unsigned long *boot_hartid); +}; + typedef union efi_load_file_protocol efi_load_file_protocol_t; typedef union efi_load_file_protocol efi_load_file2_protocol_t; diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c index 9c460843442f..10c59295f379 100644 --- a/drivers/firmware/efi/libstub/riscv-stub.c +++ b/drivers/firmware/efi/libstub/riscv-stub.c @@ -21,9 +21,9 @@ #define MIN_KIMG_ALIGN SZ_4M #endif -typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long); +typedef void __noreturn (*jump_kernel_func)(unsigned long, unsigned long); -static u32 hartid; +static unsigned long hartid; static int get_boot_hartid_from_fdt(void) { @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void) return 0; } +static efi_status_t get_boot_hartid_from_efi(void) +{ + efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID; + efi_status_t status; + struct riscv_efi_boot_protocol *boot_protocol; + + status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL, + (void **)&boot_protocol); + if (status == EFI_SUCCESS) { + status = efi_call_proto(boot_protocol, + get_boot_hartid, &hartid); + } + return status; +} + efi_status_t check_platform_features(void) { int ret; + efi_status_t status; - ret = get_boot_hartid_from_fdt(); - if (ret) { - efi_err("/chosen/boot-hartid missing or invalid!\n"); - return EFI_UNSUPPORTED; + status = get_boot_hartid_from_efi(); + if (status != EFI_SUCCESS) { + ret = get_boot_hartid_from_fdt(); + if (ret) { + efi_err("Failed to get boot hartid!\n"); + return EFI_UNSUPPORTED; + } } return EFI_SUCCESS; } diff --git a/include/linux/efi.h b/include/linux/efi.h index ccd4d3f91c98..9822c730207c 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void); #define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d) #define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0) #define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf) #define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) #define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d) #define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9) -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Sunil V L <sunilvl@ventanamicro.com> To: Ard Biesheuvel <ardb@kernel.org>, Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>, Atish Patra <atishp@rivosinc.com>, Anup Patel <apatel@ventanamicro.com>, Jessica Clarke <jrtc27@jrtc27.com>, Abner Chang <abner.chang@hpe.com>, linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org, Sunil V L <sunilvl@ventanamicro.com>, Palmer Dabbelt <palmer@rivosinc.com>, Sunil V L <sunil.vl@gmail.com> Subject: [PATCH V5 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL Date: Thu, 19 May 2022 10:45:12 +0530 [thread overview] Message-ID: <20220519051512.136724-2-sunilvl@ventanamicro.com> (raw) In-Reply-To: <20220519051512.136724-1-sunilvl@ventanamicro.com> This patch adds the support for getting the boot hart ID in Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol is preferred method over existing DT based solution since it works irrespective of DT or ACPI. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> --- drivers/firmware/efi/libstub/efistub.h | 7 +++++ drivers/firmware/efi/libstub/riscv-stub.c | 31 ++++++++++++++++++----- include/linux/efi.h | 1 + 3 files changed, 33 insertions(+), 6 deletions(-) diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index edb77b0621ea..87aa66e8ef43 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -720,6 +720,13 @@ union efi_tcg2_protocol { } mixed_mode; }; +struct riscv_efi_boot_protocol { + u64 revision; + + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, + unsigned long *boot_hartid); +}; + typedef union efi_load_file_protocol efi_load_file_protocol_t; typedef union efi_load_file_protocol efi_load_file2_protocol_t; diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c index 9c460843442f..10c59295f379 100644 --- a/drivers/firmware/efi/libstub/riscv-stub.c +++ b/drivers/firmware/efi/libstub/riscv-stub.c @@ -21,9 +21,9 @@ #define MIN_KIMG_ALIGN SZ_4M #endif -typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long); +typedef void __noreturn (*jump_kernel_func)(unsigned long, unsigned long); -static u32 hartid; +static unsigned long hartid; static int get_boot_hartid_from_fdt(void) { @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void) return 0; } +static efi_status_t get_boot_hartid_from_efi(void) +{ + efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID; + efi_status_t status; + struct riscv_efi_boot_protocol *boot_protocol; + + status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL, + (void **)&boot_protocol); + if (status == EFI_SUCCESS) { + status = efi_call_proto(boot_protocol, + get_boot_hartid, &hartid); + } + return status; +} + efi_status_t check_platform_features(void) { int ret; + efi_status_t status; - ret = get_boot_hartid_from_fdt(); - if (ret) { - efi_err("/chosen/boot-hartid missing or invalid!\n"); - return EFI_UNSUPPORTED; + status = get_boot_hartid_from_efi(); + if (status != EFI_SUCCESS) { + ret = get_boot_hartid_from_fdt(); + if (ret) { + efi_err("Failed to get boot hartid!\n"); + return EFI_UNSUPPORTED; + } } return EFI_SUCCESS; } diff --git a/include/linux/efi.h b/include/linux/efi.h index ccd4d3f91c98..9822c730207c 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void); #define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d) #define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0) #define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf) #define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) #define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d) #define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9) -- 2.25.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-05-19 5:15 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-19 5:15 [PATCH V5 0/1] RISCV_EFI_BOOT_PROTOCOL support in linux Sunil V L 2022-05-19 5:15 ` Sunil V L 2022-05-19 5:15 ` Sunil V L [this message] 2022-05-19 5:15 ` [PATCH V5 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL Sunil V L 2022-05-19 8:24 ` Ard Biesheuvel 2022-05-19 8:24 ` Ard Biesheuvel 2022-05-19 9:39 ` Sunil V L 2022-05-19 9:39 ` Sunil V L
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220519051512.136724-2-sunilvl@ventanamicro.com \ --to=sunilvl@ventanamicro.com \ --cc=abner.chang@hpe.com \ --cc=aou@eecs.berkeley.edu \ --cc=apatel@ventanamicro.com \ --cc=ardb@kernel.org \ --cc=atishp@rivosinc.com \ --cc=heinrich.schuchardt@canonical.com \ --cc=ilias.apalodimas@linaro.org \ --cc=jrtc27@jrtc27.com \ --cc=linux-efi@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=palmer@dabbelt.com \ --cc=palmer@rivosinc.com \ --cc=paul.walmsley@sifive.com \ --cc=sunil.vl@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.