From: Marvin Lin <milkfafa@gmail.com> To: mchehab@kernel.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org Cc: openbmc@lists.ozlabs.org, avifishman70@gmail.com, tmaimon77@gmail.com, tali.perry1@gmail.com, kwliu@nuvoton.com, kflin@nuvoton.com, Marvin Lin <milkfafa@gmail.com> Subject: [PATCH v3 0/5] Support Nuvoton NPCM Video Capture/Encode Engine Date: Fri, 20 May 2022 10:47:39 +0800 [thread overview] Message-ID: <20220520024744.25655-1-milkfafa@gmail.com> (raw) This patch series add DTS node, dt-bindings document and drivers for Video Capture/Differentiation Engine (VCD) and Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs. VCD can capture/differentiate video data from digital or analog sources, then the ECE will compress the data into HEXTILE format. HEXTILE compressed format is defined in Remote Framebuffer Protocol (RFC 6143) and is used by VNC features, so we also add a patch to support it. Changes since v1: - Add Hextile document and locate with vendor formats. - Add video driver entry in MAINTAINERS - Change config name to CONFIG_VIDEO_NPCM_VCD_ECE - Reduce the waiting time after resetting the VCD/ECE module - Correct data types of some variables Marvin Lin (5): arm: dts: Add node for NPCM Video Capture/Encode Engine dt-bindings: media: Add dt-bindings for NPCM Video Capture/Encode Engine dt-bindings: arm/npcm: Add dt-bindings for Graphics Core Information media: Add HEXTILE compressed format drivers: media: platform: Add NPCM Video Capture/Encode Engine driver .../bindings/arm/npcm/nuvoton,gfxi.yaml | 41 + .../bindings/media/nuvoton,npcm-video.yaml | 87 + .../media/v4l/pixfmt-reserved.rst | 7 + MAINTAINERS | 9 + arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 19 + drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 1 + drivers/media/platform/nuvoton/Kconfig | 12 + drivers/media/platform/nuvoton/Makefile | 2 + drivers/media/platform/nuvoton/npcm-video.c | 2064 +++++++++++++++++ drivers/media/v4l2-core/v4l2-ioctl.c | 1 + include/uapi/linux/videodev2.h | 1 + 12 files changed, 2245 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/npcm/nuvoton,gfxi.yaml create mode 100644 Documentation/devicetree/bindings/media/nuvoton,npcm-video.yaml create mode 100644 drivers/media/platform/nuvoton/Kconfig create mode 100644 drivers/media/platform/nuvoton/Makefile create mode 100644 drivers/media/platform/nuvoton/npcm-video.c -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Marvin Lin <milkfafa@gmail.com> To: mchehab@kernel.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org Cc: kwliu@nuvoton.com, Marvin Lin <milkfafa@gmail.com>, tmaimon77@gmail.com, avifishman70@gmail.com, openbmc@lists.ozlabs.org, tali.perry1@gmail.com, kflin@nuvoton.com Subject: [PATCH v3 0/5] Support Nuvoton NPCM Video Capture/Encode Engine Date: Fri, 20 May 2022 10:47:39 +0800 [thread overview] Message-ID: <20220520024744.25655-1-milkfafa@gmail.com> (raw) This patch series add DTS node, dt-bindings document and drivers for Video Capture/Differentiation Engine (VCD) and Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs. VCD can capture/differentiate video data from digital or analog sources, then the ECE will compress the data into HEXTILE format. HEXTILE compressed format is defined in Remote Framebuffer Protocol (RFC 6143) and is used by VNC features, so we also add a patch to support it. Changes since v1: - Add Hextile document and locate with vendor formats. - Add video driver entry in MAINTAINERS - Change config name to CONFIG_VIDEO_NPCM_VCD_ECE - Reduce the waiting time after resetting the VCD/ECE module - Correct data types of some variables Marvin Lin (5): arm: dts: Add node for NPCM Video Capture/Encode Engine dt-bindings: media: Add dt-bindings for NPCM Video Capture/Encode Engine dt-bindings: arm/npcm: Add dt-bindings for Graphics Core Information media: Add HEXTILE compressed format drivers: media: platform: Add NPCM Video Capture/Encode Engine driver .../bindings/arm/npcm/nuvoton,gfxi.yaml | 41 + .../bindings/media/nuvoton,npcm-video.yaml | 87 + .../media/v4l/pixfmt-reserved.rst | 7 + MAINTAINERS | 9 + arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 19 + drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 1 + drivers/media/platform/nuvoton/Kconfig | 12 + drivers/media/platform/nuvoton/Makefile | 2 + drivers/media/platform/nuvoton/npcm-video.c | 2064 +++++++++++++++++ drivers/media/v4l2-core/v4l2-ioctl.c | 1 + include/uapi/linux/videodev2.h | 1 + 12 files changed, 2245 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/npcm/nuvoton,gfxi.yaml create mode 100644 Documentation/devicetree/bindings/media/nuvoton,npcm-video.yaml create mode 100644 drivers/media/platform/nuvoton/Kconfig create mode 100644 drivers/media/platform/nuvoton/Makefile create mode 100644 drivers/media/platform/nuvoton/npcm-video.c -- 2.17.1
next reply other threads:[~2022-05-20 2:48 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-20 2:47 Marvin Lin [this message] 2022-05-20 2:47 ` [PATCH v3 0/5] Support Nuvoton NPCM Video Capture/Encode Engine Marvin Lin 2022-05-20 2:47 ` [PATCH v3 1/5] arm: dts: Add node for " Marvin Lin 2022-05-20 2:47 ` Marvin Lin 2022-05-20 2:47 ` [PATCH v3 2/5] dt-bindings: media: Add dt-bindings " Marvin Lin 2022-05-20 2:47 ` Marvin Lin 2022-05-20 2:47 ` [PATCH v3 3/5] dt-bindings: arm/npcm: Add dt-bindings for Graphics Core Information Marvin Lin 2022-05-20 2:47 ` Marvin Lin 2022-05-20 2:47 ` [PATCH v3 4/5] media: Add HEXTILE compressed format Marvin Lin 2022-05-20 2:47 ` Marvin Lin 2022-05-20 18:43 ` Nicolas Dufresne 2022-05-20 18:43 ` Nicolas Dufresne 2022-05-23 1:57 ` Kun-Fa Lin 2022-05-23 1:57 ` Kun-Fa Lin 2022-05-20 2:47 ` [PATCH v3 5/5] drivers: media: platform: Add NPCM Video Capture/Encode Engine driver Marvin Lin 2022-05-20 2:47 ` Marvin Lin 2022-05-20 12:48 ` kernel test robot 2022-05-20 12:48 ` kernel test robot 2022-05-20 21:54 ` kernel test robot 2022-05-20 21:54 ` kernel test robot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220520024744.25655-1-milkfafa@gmail.com \ --to=milkfafa@gmail.com \ --cc=avifishman70@gmail.com \ --cc=kflin@nuvoton.com \ --cc=kwliu@nuvoton.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=openbmc@lists.ozlabs.org \ --cc=tali.perry1@gmail.com \ --cc=tmaimon77@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.