All of lore.kernel.org
 help / color / mirror / Atom feed
From: Juerg Haefliger <juerg.haefliger@canonical.com>
To: krzysztof.kozlowski@linaro.org, alim.akhtar@samsung.com,
	linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Juerg Haefliger <juergh@canonical.com>
Subject: [PATCH 3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation
Date: Mon, 23 May 2022 08:42:52 +0200	[thread overview]
Message-ID: <20220523064252.11938-4-juergh@canonical.com> (raw)
In-Reply-To: <20220523064252.11938-1-juergh@canonical.com>

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
 arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index af01675d8769..bbaa8ff3367b 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -99,7 +99,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -109,7 +109,7 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
+	bool "SMDK6400"
 	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
@@ -200,7 +200,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -209,7 +209,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -255,7 +255,7 @@ config MACH_NCP
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
@@ -287,21 +287,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
-- 
2.32.0


WARNING: multiple messages have this Message-ID (diff)
From: Juerg Haefliger <juerg.haefliger@canonical.com>
To: krzysztof.kozlowski@linaro.org, alim.akhtar@samsung.com,
	linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Juerg Haefliger <juergh@canonical.com>
Subject: [PATCH 3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation
Date: Mon, 23 May 2022 08:42:52 +0200	[thread overview]
Message-ID: <20220523064252.11938-4-juergh@canonical.com> (raw)
In-Reply-To: <20220523064252.11938-1-juergh@canonical.com>

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
 arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index af01675d8769..bbaa8ff3367b 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -99,7 +99,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -109,7 +109,7 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
+	bool "SMDK6400"
 	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
@@ -200,7 +200,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -209,7 +209,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -255,7 +255,7 @@ config MACH_NCP
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
@@ -287,21 +287,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
-- 
2.32.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-05-23  7:32 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-23  6:42 [PATCH 0/3] ARM: s3c: Kconfig: Style cleanups Juerg Haefliger
2022-05-23  6:42 ` Juerg Haefliger
2022-05-23  6:42 ` [PATCH 1/3] ARM: s3c: Kconfig: Fix indentation Juerg Haefliger
2022-05-23  6:42   ` Juerg Haefliger
2022-05-23  6:42 ` [PATCH 2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs Juerg Haefliger
2022-05-23  6:42   ` Juerg Haefliger
2022-05-23  6:58   ` Alim Akhtar
2022-05-23  6:58     ` Alim Akhtar
2022-05-23  6:42 ` Juerg Haefliger [this message]
2022-05-23  6:42   ` [PATCH 3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation Juerg Haefliger
2022-06-06  9:13 ` [PATCH 0/3] ARM: s3c: Kconfig: Style cleanups Krzysztof Kozlowski
2022-06-06  9:13   ` Krzysztof Kozlowski
2022-06-06  9:14   ` Krzysztof Kozlowski
2022-06-06  9:14     ` Krzysztof Kozlowski
2022-06-07  6:59     ` Juerg Haefliger
2022-06-07  6:59       ` Juerg Haefliger
2022-06-09  8:21     ` [PATCH 0/3 v3] " Juerg Haefliger
2022-06-09  8:21       ` Juerg Haefliger
2022-06-09  8:21       ` [PATCH 1/3 v3] ARM: s3c: Kconfig: Fix indentation Juerg Haefliger
2022-06-09  8:21         ` Juerg Haefliger
2022-06-09  8:21       ` [PATCH 2/3 v3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs Juerg Haefliger
2022-06-09  8:21         ` Juerg Haefliger
2022-06-09  8:21       ` [PATCH 3/3 v3] ARM: s3c: Kconfig.s3c64xx: Fix indentation Juerg Haefliger
2022-06-09  8:21         ` Juerg Haefliger
2022-06-09 18:36       ` [PATCH 0/3 v3] ARM: s3c: Kconfig: Style cleanups Krzysztof Kozlowski
2022-06-09 18:36         ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220523064252.11938-4-juergh@canonical.com \
    --to=juerg.haefliger@canonical.com \
    --cc=alim.akhtar@samsung.com \
    --cc=juergh@canonical.com \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.