From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-media@vger.kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Eugen Hristev <eugen.hristev@microchip.com> Subject: [PATCH] media: atmel: atmel-isc-base: move cropping settings outside start_dma Date: Mon, 23 May 2022 17:17:05 +0300 [thread overview] Message-ID: <20220523141705.98121-1-eugen.hristev@microchip.com> (raw) The cropping configuration of the Parallel Front Engine (PFE) can be done just once when the streaming starts. The ISC configuration is in place and will not be changed while streaming. It is not effective to keep rewriting the crop registers configuration everytime start_dma is called, as this can be called for each queued buffer. Thus we can configure the cropping at start_streaming time. This change moves the code to a dedicated function. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- drivers/media/platform/atmel/atmel-isc-base.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c index 894c22081397..01a2e7f626d0 100644 --- a/drivers/media/platform/atmel/atmel-isc-base.c +++ b/drivers/media/platform/atmel/atmel-isc-base.c @@ -127,12 +127,9 @@ static int isc_buffer_prepare(struct vb2_buffer *vb) return 0; } -static void isc_start_dma(struct isc_device *isc) +static void isc_crop_pfe(struct isc_device *isc) { struct regmap *regmap = isc->regmap; - u32 sizeimage = isc->fmt.fmt.pix.sizeimage; - u32 dctrl_dview; - dma_addr_t addr0; u32 h, w; h = isc->fmt.fmt.pix.height; @@ -167,6 +164,14 @@ static void isc_start_dma(struct isc_device *isc) regmap_update_bits(regmap, ISC_PFE_CFG0, ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN, ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN); +} + +static void isc_start_dma(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + u32 sizeimage = isc->fmt.fmt.pix.sizeimage; + u32 dctrl_dview; + dma_addr_t addr0; addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0); regmap_write(regmap, ISC_DAD0 + isc->offsets.dma, addr0); @@ -371,6 +376,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) struct isc_buffer, list); list_del(&isc->cur_frm->list); + isc_crop_pfe(isc); isc_start_dma(isc); spin_unlock_irqrestore(&isc->dma_queue_lock, flags); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Eugen Hristev <eugen.hristev@microchip.com> To: <linux-media@vger.kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Eugen Hristev <eugen.hristev@microchip.com> Subject: [PATCH] media: atmel: atmel-isc-base: move cropping settings outside start_dma Date: Mon, 23 May 2022 17:17:05 +0300 [thread overview] Message-ID: <20220523141705.98121-1-eugen.hristev@microchip.com> (raw) The cropping configuration of the Parallel Front Engine (PFE) can be done just once when the streaming starts. The ISC configuration is in place and will not be changed while streaming. It is not effective to keep rewriting the crop registers configuration everytime start_dma is called, as this can be called for each queued buffer. Thus we can configure the cropping at start_streaming time. This change moves the code to a dedicated function. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- drivers/media/platform/atmel/atmel-isc-base.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c index 894c22081397..01a2e7f626d0 100644 --- a/drivers/media/platform/atmel/atmel-isc-base.c +++ b/drivers/media/platform/atmel/atmel-isc-base.c @@ -127,12 +127,9 @@ static int isc_buffer_prepare(struct vb2_buffer *vb) return 0; } -static void isc_start_dma(struct isc_device *isc) +static void isc_crop_pfe(struct isc_device *isc) { struct regmap *regmap = isc->regmap; - u32 sizeimage = isc->fmt.fmt.pix.sizeimage; - u32 dctrl_dview; - dma_addr_t addr0; u32 h, w; h = isc->fmt.fmt.pix.height; @@ -167,6 +164,14 @@ static void isc_start_dma(struct isc_device *isc) regmap_update_bits(regmap, ISC_PFE_CFG0, ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN, ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN); +} + +static void isc_start_dma(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + u32 sizeimage = isc->fmt.fmt.pix.sizeimage; + u32 dctrl_dview; + dma_addr_t addr0; addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0); regmap_write(regmap, ISC_DAD0 + isc->offsets.dma, addr0); @@ -371,6 +376,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) struct isc_buffer, list); list_del(&isc->cur_frm->list); + isc_crop_pfe(isc); isc_start_dma(isc); spin_unlock_irqrestore(&isc->dma_queue_lock, flags); -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-05-23 14:17 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-23 14:17 Eugen Hristev [this message] 2022-05-23 14:17 ` [PATCH] media: atmel: atmel-isc-base: move cropping settings outside start_dma Eugen Hristev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220523141705.98121-1-eugen.hristev@microchip.com \ --to=eugen.hristev@microchip.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.