From: Sunil V L <sunilvl@ventanamicro.com> To: Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Daniel Lezcano <daniel.lezcano@linaro.org>, Thomas Gleixner <tglx@linutronix.de>, Ard Biesheuvel <ardb@kernel.org>, Marc Zyngier <maz@kernel.org>, Atish Patra <atishp@rivosinc.com>, Heinrich Schuchardt <heinrich.schuchardt@canonical.com>, Anup Patel <apatel@ventanamicro.com> Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, linux-efi@vger.kernel.org, Sunil V L <sunil.vl@gmail.com>, Sunil V L <sunilvl@ventanamicro.com> Subject: [PATCH 5/5] riscv/efi_stub: Support for 64bit boot-hartid Date: Wed, 25 May 2022 20:41:06 +0530 [thread overview] Message-ID: <20220525151106.2176147-6-sunilvl@ventanamicro.com> (raw) In-Reply-To: <20220525151106.2176147-1-sunilvl@ventanamicro.com> The boot-hartid can be a 64bit value on RV64 platforms. Currently, the "boot-hartid" in DT is assumed to be 32bit only. This patch detects the size of the "boot-hartid" and uses 32bit or 64bit FDT reads appropriately. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> --- drivers/firmware/efi/libstub/riscv-stub.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c index 9e85e58d1f27..d748533f1329 100644 --- a/drivers/firmware/efi/libstub/riscv-stub.c +++ b/drivers/firmware/efi/libstub/riscv-stub.c @@ -29,7 +29,7 @@ static int get_boot_hartid_from_fdt(void) { const void *fdt; int chosen_node, len; - const fdt32_t *prop; + const void *prop; fdt = get_efi_config_table(DEVICE_TREE_GUID); if (!fdt) @@ -40,10 +40,16 @@ static int get_boot_hartid_from_fdt(void) return -EINVAL; prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len); - if (!prop || len != sizeof(u32)) + if (!prop) + return -EINVAL; + + if (len == sizeof(u32)) + hartid = (unsigned long) fdt32_to_cpu(*(fdt32_t *)prop); + else if (len == sizeof(u64)) + hartid = (unsigned long) fdt64_to_cpu(*(fdt64_t *)prop); + else return -EINVAL; - hartid = fdt32_to_cpu(*prop); return 0; } -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Sunil V L <sunilvl@ventanamicro.com> To: Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Daniel Lezcano <daniel.lezcano@linaro.org>, Thomas Gleixner <tglx@linutronix.de>, Ard Biesheuvel <ardb@kernel.org>, Marc Zyngier <maz@kernel.org>, Atish Patra <atishp@rivosinc.com>, Heinrich Schuchardt <heinrich.schuchardt@canonical.com>, Anup Patel <apatel@ventanamicro.com> Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org, linux-efi@vger.kernel.org, Sunil V L <sunil.vl@gmail.com>, Sunil V L <sunilvl@ventanamicro.com> Subject: [PATCH 5/5] riscv/efi_stub: Support for 64bit boot-hartid Date: Wed, 25 May 2022 20:41:06 +0530 [thread overview] Message-ID: <20220525151106.2176147-6-sunilvl@ventanamicro.com> (raw) In-Reply-To: <20220525151106.2176147-1-sunilvl@ventanamicro.com> The boot-hartid can be a 64bit value on RV64 platforms. Currently, the "boot-hartid" in DT is assumed to be 32bit only. This patch detects the size of the "boot-hartid" and uses 32bit or 64bit FDT reads appropriately. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> --- drivers/firmware/efi/libstub/riscv-stub.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c index 9e85e58d1f27..d748533f1329 100644 --- a/drivers/firmware/efi/libstub/riscv-stub.c +++ b/drivers/firmware/efi/libstub/riscv-stub.c @@ -29,7 +29,7 @@ static int get_boot_hartid_from_fdt(void) { const void *fdt; int chosen_node, len; - const fdt32_t *prop; + const void *prop; fdt = get_efi_config_table(DEVICE_TREE_GUID); if (!fdt) @@ -40,10 +40,16 @@ static int get_boot_hartid_from_fdt(void) return -EINVAL; prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len); - if (!prop || len != sizeof(u32)) + if (!prop) + return -EINVAL; + + if (len == sizeof(u32)) + hartid = (unsigned long) fdt32_to_cpu(*(fdt32_t *)prop); + else if (len == sizeof(u64)) + hartid = (unsigned long) fdt64_to_cpu(*(fdt64_t *)prop); + else return -EINVAL; - hartid = fdt32_to_cpu(*prop); return 0; } -- 2.25.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-05-25 15:12 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-25 15:11 [PATCH 0/5] Support for 64bit hartid on RV64 platforms Sunil V L 2022-05-25 15:11 ` Sunil V L 2022-05-25 15:11 ` [PATCH 1/5] riscv: cpu_ops_sbi: Support for 64bit hartid Sunil V L 2022-05-25 15:11 ` Sunil V L 2022-05-25 15:17 ` Heinrich Schuchardt 2022-05-25 15:17 ` Heinrich Schuchardt 2022-05-25 15:11 ` [PATCH 2/5] riscv: cpu_ops_spinwait: " Sunil V L 2022-05-25 15:11 ` Sunil V L 2022-05-25 15:27 ` Heinrich Schuchardt 2022-05-25 15:27 ` Heinrich Schuchardt 2022-05-26 10:15 ` Sunil V L 2022-05-26 10:15 ` Sunil V L 2022-05-25 15:11 ` [PATCH 3/5] riscv: smp: " Sunil V L 2022-05-25 15:11 ` Sunil V L 2022-05-25 15:58 ` Heinrich Schuchardt 2022-05-25 15:58 ` Heinrich Schuchardt 2022-05-25 15:11 ` [PATCH 4/5] riscv: cpu: " Sunil V L 2022-05-25 15:11 ` Sunil V L 2022-05-25 15:11 ` Sunil V L [this message] 2022-05-25 15:11 ` [PATCH 5/5] riscv/efi_stub: Support for 64bit boot-hartid Sunil V L 2022-05-25 15:48 ` Ard Biesheuvel 2022-05-25 15:48 ` Ard Biesheuvel 2022-05-25 16:09 ` Heinrich Schuchardt 2022-05-25 16:09 ` Heinrich Schuchardt 2022-05-25 23:11 ` Atish Patra 2022-05-25 23:11 ` Atish Patra 2022-05-25 23:36 ` Jessica Clarke 2022-05-25 23:36 ` Jessica Clarke 2022-05-25 23:49 ` Atish Patra 2022-05-25 23:49 ` Atish Patra 2022-05-26 0:06 ` Jessica Clarke 2022-05-26 0:06 ` Jessica Clarke 2022-05-26 10:13 ` Sunil V L 2022-05-26 10:13 ` Sunil V L
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220525151106.2176147-6-sunilvl@ventanamicro.com \ --to=sunilvl@ventanamicro.com \ --cc=aou@eecs.berkeley.edu \ --cc=apatel@ventanamicro.com \ --cc=ardb@kernel.org \ --cc=atishp@rivosinc.com \ --cc=daniel.lezcano@linaro.org \ --cc=heinrich.schuchardt@canonical.com \ --cc=linux-efi@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=maz@kernel.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=sunil.vl@gmail.com \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.