From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Linh Phung <linh.phung.jy@renesas.com>,
Wolfram Sang <wsa@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: renesas: r8a779f0: Add thermal support
Date: Wed, 25 May 2022 17:13:55 +0200 [thread overview]
Message-ID: <20220525151355.24175-1-wsa+renesas@sang-engineering.com> (raw)
From: Linh Phung <linh.phung.jy@renesas.com>
Add support for 3 TSC nodes of thermal. The 4th node is for the control
domain and not for Linux.
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
[wsa: rebased, fixed resource size, removed unused 4th node breaking probe]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
---
Works fine on my Spider board and allowed me to disconnect the fan :)
arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 56 +++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index df46fb87cffc..d89064f86d85 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -157,6 +157,18 @@ sysc: system-controller@e6180000 {
#power-domain-cells = <1>;
};
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a779f0-thermal";
+ /* The 4th sensor is in control domain and not for Linux */
+ reg = <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>,
+ <0 0xe61a8000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779f0",
"renesas,rcar-gen4-i2c";
@@ -360,6 +372,50 @@ prr: chipid@fff00044 {
};
};
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
--
2.35.1
next reply other threads:[~2022-05-25 15:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-25 15:13 Wolfram Sang [this message]
2022-06-09 9:19 ` [PATCH] arm64: dts: renesas: r8a779f0: Add thermal support Geert Uytterhoeven
2022-06-12 19:48 ` Wolfram Sang
2022-06-13 9:11 ` Geert Uytterhoeven
2022-06-13 9:25 ` Wolfram Sang
2022-06-15 13:33 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220525151355.24175-1-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linh.phung.jy@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.