All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	<wim@linux-watchdog.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>, <linux@roeck-us.net>
Cc: devicetree@vger.kernel.org,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	David Airlie <airlied@linux.ie>,
	"jason-jh . lin" <jason-jh.lin@mediatek.com>,
	singo.chang@mediatek.com, llvm@lists.linux.dev,
	Nick Desaulniers <ndesaulniers@google.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Nathan Chancellor <nathan@kernel.org>,
	"Nancy . Lin" <nancy.lin@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v22 08/24] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Date: Thu, 26 May 2022 19:02:17 +0800	[thread overview]
Message-ID: <20220526110233.20080-9-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20220526110233.20080-1-nancy.lin@mediatek.com>

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/soc/mediatek/mtk-mmsys.c       | 54 +++++++++++++++++++-------
 include/linux/soc/mediatek/mtk-mmsys.h | 15 +++++--
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 48d5e5d1d0a1..999be064103b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -178,6 +178,7 @@ struct mtk_mmsys {
 	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
 	struct reset_controller_dev rcdev;
 	phys_addr_t io_start;
+	struct cmdq_client_reg cmdq_base;
 };
 
 static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
@@ -192,10 +193,24 @@ static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
 	return -EINVAL;
 }
 
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	u32 tmp;
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (cmdq_pkt) {
+		if (mmsys->cmdq_base.size == 0) {
+			pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+			return;
+		}
+		cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+				    mmsys->cmdq_base.offset + offset, val,
+				    mask);
+		return;
+	}
+#endif
+
 	tmp = readl_relaxed(mmsys->regs + offset);
 	tmp = (tmp & ~mask) | val;
 	writel_relaxed(tmp, mmsys->regs + offset);
@@ -212,7 +227,7 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
-					      routes[i].val);
+					      routes[i].val, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -226,42 +241,45 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
-			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
+			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
-			      ~0, height << 16 | width);
+			      ~0, height << 16 | width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height)
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
-			      be_height << 16 | be_width);
+			      be_height << 16 | be_width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth)
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
 {
 	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
-			      alpha << 16 | alpha);
+			      alpha << 16 | alpha, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
-			      alpha_sel << (19 + idx));
+			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode);
+			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap)
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      BIT(4), channel_swap << 4);
+			      BIT(4), channel_swap << 4, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
 
@@ -274,9 +292,9 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	spin_lock_irqsave(&mmsys->lock, flags);
 
 	if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
 	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
 
 	spin_unlock_irqrestore(&mmsys->lock, flags);
 
@@ -366,6 +384,12 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		mmsys->data = match_data->drv_data[0];
 	}
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
 	platform_set_drvdata(pdev, mmsys);
 
 	clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index fe620929b0f9..7a73305390ba 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
 #ifndef __MTK_MMSYS_H
 #define __MTK_MMSYS_H
 
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
 enum mtk_ddp_comp_id;
 struct device;
 
@@ -73,13 +77,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 			      enum mtk_ddp_comp_id cur,
 			      enum mtk_ddp_comp_id next);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+				  int height, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height);
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth);
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap);
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt);
 
 #endif /* __MTK_MMSYS_H */
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	<wim@linux-watchdog.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>, <linux@roeck-us.net>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	"Nathan Chancellor" <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	"Nancy . Lin" <nancy.lin@mediatek.com>,
	"jason-jh . lin" <jason-jh.lin@mediatek.com>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<dri-devel@lists.freedesktop.org>, <llvm@lists.linux.dev>,
	<singo.chang@mediatek.com>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v22 08/24] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Date: Thu, 26 May 2022 19:02:17 +0800	[thread overview]
Message-ID: <20220526110233.20080-9-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20220526110233.20080-1-nancy.lin@mediatek.com>

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/soc/mediatek/mtk-mmsys.c       | 54 +++++++++++++++++++-------
 include/linux/soc/mediatek/mtk-mmsys.h | 15 +++++--
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 48d5e5d1d0a1..999be064103b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -178,6 +178,7 @@ struct mtk_mmsys {
 	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
 	struct reset_controller_dev rcdev;
 	phys_addr_t io_start;
+	struct cmdq_client_reg cmdq_base;
 };
 
 static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
@@ -192,10 +193,24 @@ static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
 	return -EINVAL;
 }
 
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	u32 tmp;
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (cmdq_pkt) {
+		if (mmsys->cmdq_base.size == 0) {
+			pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+			return;
+		}
+		cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+				    mmsys->cmdq_base.offset + offset, val,
+				    mask);
+		return;
+	}
+#endif
+
 	tmp = readl_relaxed(mmsys->regs + offset);
 	tmp = (tmp & ~mask) | val;
 	writel_relaxed(tmp, mmsys->regs + offset);
@@ -212,7 +227,7 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
-					      routes[i].val);
+					      routes[i].val, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -226,42 +241,45 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
-			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
+			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
-			      ~0, height << 16 | width);
+			      ~0, height << 16 | width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height)
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
-			      be_height << 16 | be_width);
+			      be_height << 16 | be_width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth)
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
 {
 	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
-			      alpha << 16 | alpha);
+			      alpha << 16 | alpha, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
-			      alpha_sel << (19 + idx));
+			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode);
+			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap)
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      BIT(4), channel_swap << 4);
+			      BIT(4), channel_swap << 4, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
 
@@ -274,9 +292,9 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	spin_lock_irqsave(&mmsys->lock, flags);
 
 	if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
 	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
 
 	spin_unlock_irqrestore(&mmsys->lock, flags);
 
@@ -366,6 +384,12 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		mmsys->data = match_data->drv_data[0];
 	}
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
 	platform_set_drvdata(pdev, mmsys);
 
 	clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index fe620929b0f9..7a73305390ba 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
 #ifndef __MTK_MMSYS_H
 #define __MTK_MMSYS_H
 
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
 enum mtk_ddp_comp_id;
 struct device;
 
@@ -73,13 +77,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 			      enum mtk_ddp_comp_id cur,
 			      enum mtk_ddp_comp_id next);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+				  int height, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height);
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth);
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap);
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt);
 
 #endif /* __MTK_MMSYS_H */
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	<wim@linux-watchdog.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>, <linux@roeck-us.net>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	"Nathan Chancellor" <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	"Nancy . Lin" <nancy.lin@mediatek.com>,
	"jason-jh . lin" <jason-jh.lin@mediatek.com>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<dri-devel@lists.freedesktop.org>, <llvm@lists.linux.dev>,
	<singo.chang@mediatek.com>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v22 08/24] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Date: Thu, 26 May 2022 19:02:17 +0800	[thread overview]
Message-ID: <20220526110233.20080-9-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20220526110233.20080-1-nancy.lin@mediatek.com>

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/soc/mediatek/mtk-mmsys.c       | 54 +++++++++++++++++++-------
 include/linux/soc/mediatek/mtk-mmsys.h | 15 +++++--
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 48d5e5d1d0a1..999be064103b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -178,6 +178,7 @@ struct mtk_mmsys {
 	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
 	struct reset_controller_dev rcdev;
 	phys_addr_t io_start;
+	struct cmdq_client_reg cmdq_base;
 };
 
 static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
@@ -192,10 +193,24 @@ static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
 	return -EINVAL;
 }
 
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	u32 tmp;
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (cmdq_pkt) {
+		if (mmsys->cmdq_base.size == 0) {
+			pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+			return;
+		}
+		cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+				    mmsys->cmdq_base.offset + offset, val,
+				    mask);
+		return;
+	}
+#endif
+
 	tmp = readl_relaxed(mmsys->regs + offset);
 	tmp = (tmp & ~mask) | val;
 	writel_relaxed(tmp, mmsys->regs + offset);
@@ -212,7 +227,7 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
-					      routes[i].val);
+					      routes[i].val, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -226,42 +241,45 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
-			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
+			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
-			      ~0, height << 16 | width);
+			      ~0, height << 16 | width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height)
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
-			      be_height << 16 | be_width);
+			      be_height << 16 | be_width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth)
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
 {
 	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
-			      alpha << 16 | alpha);
+			      alpha << 16 | alpha, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
-			      alpha_sel << (19 + idx));
+			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode);
+			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap)
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      BIT(4), channel_swap << 4);
+			      BIT(4), channel_swap << 4, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
 
@@ -274,9 +292,9 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	spin_lock_irqsave(&mmsys->lock, flags);
 
 	if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
 	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
 
 	spin_unlock_irqrestore(&mmsys->lock, flags);
 
@@ -366,6 +384,12 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		mmsys->data = match_data->drv_data[0];
 	}
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
 	platform_set_drvdata(pdev, mmsys);
 
 	clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index fe620929b0f9..7a73305390ba 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
 #ifndef __MTK_MMSYS_H
 #define __MTK_MMSYS_H
 
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
 enum mtk_ddp_comp_id;
 struct device;
 
@@ -73,13 +77,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 			      enum mtk_ddp_comp_id cur,
 			      enum mtk_ddp_comp_id next);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+				  int height, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height);
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth);
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap);
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt);
 
 #endif /* __MTK_MMSYS_H */
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	<wim@linux-watchdog.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>, <linux@roeck-us.net>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	"Nathan Chancellor" <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	"Nancy . Lin" <nancy.lin@mediatek.com>,
	"jason-jh . lin" <jason-jh.lin@mediatek.com>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<dri-devel@lists.freedesktop.org>, <llvm@lists.linux.dev>,
	<singo.chang@mediatek.com>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v22 08/24] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Date: Thu, 26 May 2022 19:02:17 +0800	[thread overview]
Message-ID: <20220526110233.20080-9-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20220526110233.20080-1-nancy.lin@mediatek.com>

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/soc/mediatek/mtk-mmsys.c       | 54 +++++++++++++++++++-------
 include/linux/soc/mediatek/mtk-mmsys.h | 15 +++++--
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 48d5e5d1d0a1..999be064103b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -178,6 +178,7 @@ struct mtk_mmsys {
 	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
 	struct reset_controller_dev rcdev;
 	phys_addr_t io_start;
+	struct cmdq_client_reg cmdq_base;
 };
 
 static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
@@ -192,10 +193,24 @@ static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
 	return -EINVAL;
 }
 
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	u32 tmp;
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (cmdq_pkt) {
+		if (mmsys->cmdq_base.size == 0) {
+			pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+			return;
+		}
+		cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+				    mmsys->cmdq_base.offset + offset, val,
+				    mask);
+		return;
+	}
+#endif
+
 	tmp = readl_relaxed(mmsys->regs + offset);
 	tmp = (tmp & ~mask) | val;
 	writel_relaxed(tmp, mmsys->regs + offset);
@@ -212,7 +227,7 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
-					      routes[i].val);
+					      routes[i].val, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -226,42 +241,45 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
-			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
+			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
-			      ~0, height << 16 | width);
+			      ~0, height << 16 | width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height)
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
-			      be_height << 16 | be_width);
+			      be_height << 16 | be_width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth)
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
 {
 	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
-			      alpha << 16 | alpha);
+			      alpha << 16 | alpha, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
-			      alpha_sel << (19 + idx));
+			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode);
+			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap)
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      BIT(4), channel_swap << 4);
+			      BIT(4), channel_swap << 4, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
 
@@ -274,9 +292,9 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	spin_lock_irqsave(&mmsys->lock, flags);
 
 	if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
 	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
 
 	spin_unlock_irqrestore(&mmsys->lock, flags);
 
@@ -366,6 +384,12 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		mmsys->data = match_data->drv_data[0];
 	}
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
 	platform_set_drvdata(pdev, mmsys);
 
 	clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index fe620929b0f9..7a73305390ba 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
 #ifndef __MTK_MMSYS_H
 #define __MTK_MMSYS_H
 
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
 enum mtk_ddp_comp_id;
 struct device;
 
@@ -73,13 +77,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 			      enum mtk_ddp_comp_id cur,
 			      enum mtk_ddp_comp_id next);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+				  int height, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height);
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth);
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap);
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt);
 
 #endif /* __MTK_MMSYS_H */
-- 
2.18.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

  parent reply	other threads:[~2022-05-26 11:02 UTC|newest]

Thread overview: 188+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-26 11:02 [PATCH v22 00/24] Add MediaTek SoC DRM (vdosys1) support for mt8195 Nancy.Lin
2022-05-26 11:02 ` Nancy.Lin
2022-05-26 11:02 ` Nancy.Lin
2022-05-26 11:02 ` Nancy.Lin
2022-05-26 11:02 ` [PATCH v22 01/24] dt-bindings: mediatek: add vdosys1 RDMA definition " Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02 ` [PATCH v22 02/24] dt-bindings: reset: mt8195: add vdosys1 reset control bit Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02 ` [PATCH v22 03/24] dt-bindings: mediatek: add ethdr definition for mt8195 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02 ` [PATCH v22 04/24] soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:07   ` Rex-BC Chen
2022-06-09  2:07     ` Rex-BC Chen
2022-06-09  2:07     ` Rex-BC Chen
2022-06-09  2:07     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 05/24] soc: mediatek: add mtk-mmsys support for mt8195 vdosys1 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:08   ` Rex-BC Chen
2022-06-09  2:08     ` Rex-BC Chen
2022-06-09  2:08     ` Rex-BC Chen
2022-06-09  2:08     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 06/24] soc: mediatek: add mtk_mmsys_update_bits API Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:08   ` Rex-BC Chen
2022-06-09  2:08     ` Rex-BC Chen
2022-06-09  2:08     ` Rex-BC Chen
2022-06-09  2:08     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 07/24] soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:09   ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-05-26 11:02 ` Nancy.Lin [this message]
2022-05-26 11:02   ` [PATCH v22 08/24] soc: mediatek: add cmdq support of " Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:09   ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 09/24] soc: mediatek: mmsys: add mmsys for support 64 reset bits Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:09   ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-06-09  2:09     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 10/24] soc: mediatek: mmsys: add reset control for MT8195 vdosys1 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:10   ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 11/24] soc: mediatek: add mtk-mutex component - dp_intf1 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:10   ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 12/24] soc: mediatek: add mtk-mutex support for mt8195 vdosys1 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:10   ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-06-09  2:10     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 13/24] drm/mediatek: add display MDP RDMA support for MT8195 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:11   ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 14/24] drm/mediatek: add display merge advance config API " Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:11   ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 15/24] drm/mediatek: add display merge start/stop API for cmdq support Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:11   ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-06-09  2:11     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 16/24] drm/mediatek: add display merge mute/unmute support for MT8195 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:12   ` Rex-BC Chen
2022-06-09  2:12     ` Rex-BC Chen
2022-06-09  2:12     ` Rex-BC Chen
2022-06-09  2:12     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 17/24] drm/mediatek: add display merge async reset control Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:12   ` Rex-BC Chen
2022-06-09  2:12     ` Rex-BC Chen
2022-06-09  2:12     ` Rex-BC Chen
2022-06-09  2:12     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 18/24] drm/mediatek: add ETHDR support for MT8195 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:13   ` Rex-BC Chen
2022-06-09  2:13     ` Rex-BC Chen
2022-06-09  2:13     ` Rex-BC Chen
2022-06-09  2:13     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 19/24] drm/mediatek: add mediatek-drm plane color encoding info Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:13   ` Rex-BC Chen
2022-06-09  2:13     ` Rex-BC Chen
2022-06-09  2:13     ` Rex-BC Chen
2022-06-09  2:13     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 20/24] drm/mediatek: add ovl_adaptor support for MT8195 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:14   ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 21/24] drm/mediatek: add dma dev get function Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:14   ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 22/24] drm/mediatek: modify mediatek-drm for mt8195 multi mmsys support Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:14   ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-06-09  2:14     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 23/24] drm/mediatek: add drm ovl_adaptor sub driver for MT8195 Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:15   ` Rex-BC Chen
2022-06-09  2:15     ` Rex-BC Chen
2022-06-09  2:15     ` Rex-BC Chen
2022-06-09  2:15     ` Rex-BC Chen
2022-05-26 11:02 ` [PATCH v22 24/24] drm/mediatek: add mediatek-drm of vdosys1 support " Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-05-26 11:02   ` Nancy.Lin
2022-06-09  2:15   ` Rex-BC Chen
2022-06-09  2:15     ` Rex-BC Chen
2022-06-09  2:15     ` Rex-BC Chen
2022-06-09  2:15     ` Rex-BC Chen
2022-06-06  8:42 ` [PATCH v22 00/24] Add MediaTek SoC DRM (vdosys1) support for mt8195 Rex-BC Chen
2022-06-06  8:42   ` Rex-BC Chen
2022-06-06  8:42   ` Rex-BC Chen
2022-06-06  8:42   ` Rex-BC Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220526110233.20080-9-nancy.lin@mediatek.com \
    --to=nancy.lin@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jason-jh.lin@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@roeck-us.net \
    --cc=llvm@lists.linux.dev \
    --cc=matthias.bgg@gmail.com \
    --cc=nathan@kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=singo.chang@mediatek.com \
    --cc=wim@linux-watchdog.org \
    --cc=yongqiang.niu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.