From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, arm@kernel.org, soc@kernel.org, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@bootlin.com>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Russell King <linux@armlinux.org.uk>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Subject: [PATCH 1/2] arm64: dts: marvell: adjust whitespace around '=' Date: Thu, 26 May 2022 22:45:24 +0200 [thread overview] Message-ID: <20220526204525.832847-1-krzysztof.kozlowski@linaro.org> (raw) Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Output compared with dtx_diff and fdtdump. --- arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts | 4 ++-- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 +- arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts | 4 ++-- arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 39a8e5e99d79..b9ba7c452a77 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -37,7 +37,7 @@ sfp_eth0: sfp-eth0 { los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; }; /* SFP 1G */ @@ -47,7 +47,7 @@ sfp_eth2: sfp-eth2 { los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 779cf167c33e..c0389dd17340 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -68,7 +68,7 @@ sfp_eth0: sfp-eth0 { los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp0_pins>; maximum-power-milliwatt = <2000>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts index 74bed79e4f5e..cf868e0bbb9c 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -70,7 +70,7 @@ sfp_cp0_eth0: sfp-cp0-eth0 { los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; @@ -80,7 +80,7 @@ sfp_cp1_eth0: sfp-cp1-eth0 { los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index 7e20987253a3..f58402eb9536 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -404,7 +404,7 @@ &cp0_usb3_0 { &cp0_usb3_1 { status = "okay"; usb-phy = <&cp0_usb3_0_phy1>; - phys = <&cp0_utmi1>; + phys = <&cp0_utmi1>; phy-names = "utmi"; dr_mode = "host"; }; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, arm@kernel.org, soc@kernel.org, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@bootlin.com>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Russell King <linux@armlinux.org.uk>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Subject: [PATCH 1/2] arm64: dts: marvell: adjust whitespace around '=' Date: Thu, 26 May 2022 22:45:24 +0200 [thread overview] Message-ID: <20220526204525.832847-1-krzysztof.kozlowski@linaro.org> (raw) Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Output compared with dtx_diff and fdtdump. --- arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts | 4 ++-- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 +- arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts | 4 ++-- arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 39a8e5e99d79..b9ba7c452a77 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -37,7 +37,7 @@ sfp_eth0: sfp-eth0 { los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; }; /* SFP 1G */ @@ -47,7 +47,7 @@ sfp_eth2: sfp-eth2 { los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 779cf167c33e..c0389dd17340 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -68,7 +68,7 @@ sfp_eth0: sfp-eth0 { los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp0_pins>; maximum-power-milliwatt = <2000>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts index 74bed79e4f5e..cf868e0bbb9c 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -70,7 +70,7 @@ sfp_cp0_eth0: sfp-cp0-eth0 { los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; @@ -80,7 +80,7 @@ sfp_cp1_eth0: sfp-cp1-eth0 { los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; maximum-power-milliwatt = <3000>; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index 7e20987253a3..f58402eb9536 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -404,7 +404,7 @@ &cp0_usb3_0 { &cp0_usb3_1 { status = "okay"; usb-phy = <&cp0_usb3_0_phy1>; - phys = <&cp0_utmi1>; + phys = <&cp0_utmi1>; phy-names = "utmi"; dr_mode = "host"; }; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-05-26 20:45 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-26 20:45 Krzysztof Kozlowski [this message] 2022-05-26 20:45 ` [PATCH 1/2] arm64: dts: marvell: adjust whitespace around '=' Krzysztof Kozlowski 2022-05-26 20:45 ` [PATCH 2/2] ARM: dts: pxa: " Krzysztof Kozlowski 2022-05-26 20:45 ` Krzysztof Kozlowski 2022-06-16 0:18 ` [PATCH 1/2] arm64: dts: marvell: " Krzysztof Kozlowski 2022-06-16 0:18 ` Krzysztof Kozlowski 2022-06-16 20:47 ` Krzysztof Kozlowski 2022-06-16 20:47 ` Krzysztof Kozlowski 2022-07-01 20:41 ` patchwork-bot+linux-soc
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220526204525.832847-1-krzysztof.kozlowski@linaro.org \ --to=krzysztof.kozlowski@linaro.org \ --cc=andrew@lunn.ch \ --cc=arm@kernel.org \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=gregory.clement@bootlin.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.