[PATCH v5 00/37] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features

[Vitaly Kuznetsov <vkuznets@redhat.com>]

Main changes since v4:
- Rebase to the latest kvm/queue [90bde5bea810].
- v4 was broken as kvm_hv_vcpu_flush_tlb() was never
  called and full TLB flush was always performed [Yuan Yao]. Call restored.
- kvm_hv_get_tlb_flush_fifo() gained explicit 'is_guest_mode' parameter:
  when queueing the request, we need to check whether the caller is in
  guest mode, not the target vCPU.
- kvm_hv_flush_tlb() resets the fifo only when doing full flush as requiests
  added concurently can get lost.
- Fix a failure in hyperv_tlb_flush due to the wrong number of XMM registers
  used.
- KVM_REQ_HV_TLB_FLUSH reset moved to kvm_hv_vcpu_empty_flush_tlb().

Original description:

Currently, KVM handles HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} requests
by flushing the whole VPID and this is sub-optimal. This series introduces
the required mechanism to make handling of these requests more 
fine-grained by flushing individual GVAs only (when requested). On this
foundation, "Direct Virtual Flush" Hyper-V feature is implemented. The 
feature allows L0 to handle Hyper-V TLB flush hypercalls directly at
L0 without the need to reflect the exit to L1. This has at least two
benefits: reflecting vmexit and the consequent vmenter are avoided + L0
has precise information whether the target vCPU is actually running (and
thus requires a kick).

Sean Christopherson (1):
  KVM: x86: hyper-v: Add helper to read hypercall data for array

Vitaly Kuznetsov (36):
  KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush'
  KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag
  KVM: x86: hyper-v: Introduce TLB flush fifo
  KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls
    gently
  KVM: x86: hyper-v: Expose support for extended gva ranges for flush
    hypercalls
  KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs
  x86/hyperv: Introduce
    HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants
  KVM: x86: hyper-v: Use
    HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw
    '64'
  KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in
    kvm_hv_send_ipi()
  KVM: x86: hyper-v: Create a separate fifo for L2 TLB flush
  KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv'
    instead of on-stack 'sparse_banks'
  KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use
  KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id
  KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush()
    nested hook
  KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall()
  KVM: x86: hyper-v: L2 TLB flush
  KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush()
    check
  x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition
  KVM: nVMX: hyper-v: Enable L2 TLB flush
  KVM: nSVM: hyper-v: Enable L2 TLB flush
  KVM: x86: Expose Hyper-V L2 TLB flush feature
  KVM: selftests: Better XMM read/write helpers
  KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common header
  KVM: selftests: Move the function doing Hyper-V hypercall to a common
    header
  KVM: selftests: Hyper-V PV IPI selftest
  KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too
  KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to
    request unmapped ranges
  KVM: selftests: Export _vm_get_page_table_entry()
  KVM: selftests: Hyper-V PV TLB flush selftest
  KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with
    hyperv-tlfs.h
  KVM: selftests: nVMX: Allocate Hyper-V partition assist page
  KVM: selftests: nSVM: Allocate Hyper-V partition assist and VP assist
    pages
  KVM: selftests: Sync 'struct hv_vp_assist_page' definition with
    hyperv-tlfs.h
  KVM: selftests: evmcs_test: Introduce L2 TLB flush test
  KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h
  KVM: selftests: hyperv_svm_test: Introduce L2 TLB flush test

 arch/x86/include/asm/hyperv-tlfs.h            |   6 +-
 arch/x86/include/asm/kvm-x86-ops.h            |   2 +-
 arch/x86/include/asm/kvm_host.h               |  41 +-
 arch/x86/kvm/Makefile                         |   3 +-
 arch/x86/kvm/hyperv.c                         | 324 +++++++--
 arch/x86/kvm/hyperv.h                         |  50 ++
 arch/x86/kvm/svm/hyperv.c                     |  18 +
 arch/x86/kvm/svm/hyperv.h                     |  37 +
 arch/x86/kvm/svm/nested.c                     |  30 +-
 arch/x86/kvm/svm/svm_onhyperv.c               |   2 +-
 arch/x86/kvm/svm/svm_onhyperv.h               |   6 +-
 arch/x86/kvm/trace.h                          |  21 +-
 arch/x86/kvm/vmx/evmcs.c                      |  24 +
 arch/x86/kvm/vmx/evmcs.h                      |  11 +
 arch/x86/kvm/vmx/nested.c                     |  32 +
 arch/x86/kvm/vmx/vmx.c                        |   6 +-
 arch/x86/kvm/x86.c                            |  18 +-
 arch/x86/kvm/x86.h                            |   1 +
 include/asm-generic/hyperv-tlfs.h             |   5 +
 include/asm-generic/mshyperv.h                |  11 +-
 tools/testing/selftests/kvm/.gitignore        |   2 +
 tools/testing/selftests/kvm/Makefile          |   4 +-
 .../selftests/kvm/include/kvm_util_base.h     |   1 +
 .../selftests/kvm/include/x86_64/evmcs.h      |  40 +-
 .../selftests/kvm/include/x86_64/hyperv.h     |  62 ++
 .../selftests/kvm/include/x86_64/processor.h  |  71 +-
 .../selftests/kvm/include/x86_64/svm_util.h   |  10 +
 .../selftests/kvm/include/x86_64/vmx.h        |   4 +
 tools/testing/selftests/kvm/lib/kvm_util.c    |   7 +-
 .../testing/selftests/kvm/lib/x86_64/hyperv.c |  21 +
 .../selftests/kvm/lib/x86_64/processor.c      |   3 +-
 tools/testing/selftests/kvm/lib/x86_64/svm.c  |  10 +
 tools/testing/selftests/kvm/lib/x86_64/vmx.c  |   7 +
 .../testing/selftests/kvm/x86_64/evmcs_test.c |  43 +-
 .../selftests/kvm/x86_64/hyperv_features.c    |  22 +-
 .../testing/selftests/kvm/x86_64/hyperv_ipi.c | 352 ++++++++++
 .../selftests/kvm/x86_64/hyperv_svm_test.c    |  54 +-
 .../selftests/kvm/x86_64/hyperv_tlb_flush.c   | 660 ++++++++++++++++++
 38 files changed, 1844 insertions(+), 177 deletions(-)
 create mode 100644 arch/x86/kvm/svm/hyperv.c
 create mode 100644 tools/testing/selftests/kvm/lib/x86_64/hyperv.c
 create mode 100644 tools/testing/selftests/kvm/x86_64/hyperv_ipi.c
 create mode 100644 tools/testing/selftests/kvm/x86_64/hyperv_tlb_flush.c

-- 
2.35.3