All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tanmay Shah <tanmay.shah@xilinx.com>
To: <bjorn.andersson@linaro.org>, <mathieu.poirier@linaro.org>,
	<robh+dt@kernel.org>, <krzk+dt@kernel.org>,
	<michal.simek@xilinx.com>, <ben.levinsky@xilinx.com>,
	<tanmay.shah@xilinx.com>
Cc: <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<openamp-system-reference@lists.openampproject.org>
Subject: [PATCH v8 4/6] firmware: xilinx: Add shutdown/wakeup APIs
Date: Thu, 2 Jun 2022 13:38:32 -0700	[thread overview]
Message-ID: <20220602203834.3675160-5-tanmay.shah@xilinx.com> (raw)
In-Reply-To: <20220602203834.3675160-1-tanmay.shah@xilinx.com>

From: Ben Levinsky <ben.levinsky@xilinx.com>

Add shutdown/wakeup a resource eemi operations to shutdown
or bringup a resource.

Note alignment of args matches convention of other fn's in this file.
The reason being that the long fn name results in aligned args that
otherwise go over 80 chars so shift right to avoid this

Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
---

Changes in v8:
  - None

Changes in v7:
  - None

Changes in v6:
  - None

Changes in v5:
  - None

Changes in v4:
  - None

Changes in v3:
  - None

 drivers/firmware/xilinx/zynqmp.c     | 35 ++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 23 ++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index f21ece56695e..fabdbac868f5 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -1067,6 +1067,41 @@ int zynqmp_pm_release_node(const u32 node)
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
 
+/**
+ * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
+ *             be powered down forcefully
+ * @node:  Node ID of the targeted PU or subsystem
+ * @ack:   Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_pwrdwn(const u32 node,
+			   const enum zynqmp_pm_request_ack ack)
+{
+	return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn);
+
+/**
+ * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem
+ * @node:  Node ID of the master or subsystem
+ * @set_addr:  Specifies whether the address argument is relevant
+ * @address:   Address from which to resume when woken up
+ * @ack:   Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wake(const u32 node,
+			   const bool set_addr,
+			   const u64 address,
+			   const enum zynqmp_pm_request_ack ack)
+{
+	/* set_addr flag is encoded into 1st bit of address */
+	return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+				   address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake);
+
 /**
  * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
  * @node:		Node ID of the slave
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 54331b726ab0..bce3465a70a4 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -12,6 +12,7 @@
 
 #ifndef __FIRMWARE_ZYNQMP_H__
 #define __FIRMWARE_ZYNQMP_H__
+#include <linux/types.h>
 
 #include <linux/err.h>
 
@@ -81,6 +82,8 @@ enum pm_api_cb_id {
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
 	PM_REGISTER_NOTIFIER = 5,
+	PM_FORCE_POWERDOWN = 8,
+	PM_REQUEST_WAKEUP = 10,
 	PM_SYSTEM_SHUTDOWN = 12,
 	PM_REQUEST_NODE = 13,
 	PM_RELEASE_NODE = 14,
@@ -481,6 +484,12 @@ int zynqmp_pm_register_notifier(const u32 node, const u32 event,
 int zynqmp_pm_feature(const u32 api_id);
 int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
 int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
+int zynqmp_pm_force_pwrdwn(const u32 target,
+			   const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wake(const u32 node,
+			   const bool set_addr,
+			   const u64 address,
+			   const enum zynqmp_pm_request_ack ack);
 #else
 static inline int zynqmp_pm_get_api_version(u32 *version)
 {
@@ -741,6 +750,20 @@ static inline int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_force_pwrdwn(const u32 target,
+					 const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_request_wake(const u32 node,
+					 const bool set_addr,
+					 const u64 address,
+					 const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Tanmay Shah <tanmay.shah@xilinx.com>
To: <bjorn.andersson@linaro.org>, <mathieu.poirier@linaro.org>,
	<robh+dt@kernel.org>, <krzk+dt@kernel.org>,
	<michal.simek@xilinx.com>, <ben.levinsky@xilinx.com>,
	<tanmay.shah@xilinx.com>
Cc: <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<openamp-system-reference@lists.openampproject.org>
Subject: [PATCH v8 4/6] firmware: xilinx: Add shutdown/wakeup APIs
Date: Thu, 2 Jun 2022 13:38:32 -0700	[thread overview]
Message-ID: <20220602203834.3675160-5-tanmay.shah@xilinx.com> (raw)
In-Reply-To: <20220602203834.3675160-1-tanmay.shah@xilinx.com>

From: Ben Levinsky <ben.levinsky@xilinx.com>

Add shutdown/wakeup a resource eemi operations to shutdown
or bringup a resource.

Note alignment of args matches convention of other fn's in this file.
The reason being that the long fn name results in aligned args that
otherwise go over 80 chars so shift right to avoid this

Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
---

Changes in v8:
  - None

Changes in v7:
  - None

Changes in v6:
  - None

Changes in v5:
  - None

Changes in v4:
  - None

Changes in v3:
  - None

 drivers/firmware/xilinx/zynqmp.c     | 35 ++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 23 ++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index f21ece56695e..fabdbac868f5 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -1067,6 +1067,41 @@ int zynqmp_pm_release_node(const u32 node)
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
 
+/**
+ * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
+ *             be powered down forcefully
+ * @node:  Node ID of the targeted PU or subsystem
+ * @ack:   Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_pwrdwn(const u32 node,
+			   const enum zynqmp_pm_request_ack ack)
+{
+	return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn);
+
+/**
+ * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem
+ * @node:  Node ID of the master or subsystem
+ * @set_addr:  Specifies whether the address argument is relevant
+ * @address:   Address from which to resume when woken up
+ * @ack:   Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wake(const u32 node,
+			   const bool set_addr,
+			   const u64 address,
+			   const enum zynqmp_pm_request_ack ack)
+{
+	/* set_addr flag is encoded into 1st bit of address */
+	return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+				   address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake);
+
 /**
  * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
  * @node:		Node ID of the slave
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 54331b726ab0..bce3465a70a4 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -12,6 +12,7 @@
 
 #ifndef __FIRMWARE_ZYNQMP_H__
 #define __FIRMWARE_ZYNQMP_H__
+#include <linux/types.h>
 
 #include <linux/err.h>
 
@@ -81,6 +82,8 @@ enum pm_api_cb_id {
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
 	PM_REGISTER_NOTIFIER = 5,
+	PM_FORCE_POWERDOWN = 8,
+	PM_REQUEST_WAKEUP = 10,
 	PM_SYSTEM_SHUTDOWN = 12,
 	PM_REQUEST_NODE = 13,
 	PM_RELEASE_NODE = 14,
@@ -481,6 +484,12 @@ int zynqmp_pm_register_notifier(const u32 node, const u32 event,
 int zynqmp_pm_feature(const u32 api_id);
 int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
 int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
+int zynqmp_pm_force_pwrdwn(const u32 target,
+			   const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wake(const u32 node,
+			   const bool set_addr,
+			   const u64 address,
+			   const enum zynqmp_pm_request_ack ack);
 #else
 static inline int zynqmp_pm_get_api_version(u32 *version)
 {
@@ -741,6 +750,20 @@ static inline int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_force_pwrdwn(const u32 target,
+					 const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_request_wake(const u32 node,
+					 const bool set_addr,
+					 const u64 address,
+					 const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-06-02 20:39 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-02 20:38 [PATCH v8 0/6] Add Xilinx RPU subsystem support Tanmay Shah
2022-06-02 20:38 ` Tanmay Shah
2022-06-02 20:38 ` [PATCH v8 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings Tanmay Shah
2022-06-02 20:38   ` Tanmay Shah
2022-06-03  6:33   ` Peter Korsgaard
2022-06-03  6:33     ` Peter Korsgaard
2022-06-09 17:41     ` Rob Herring
2022-06-09 17:41       ` Rob Herring
2022-06-10 16:17       ` Tanmay Shah
2022-06-10 16:17         ` Tanmay Shah
2022-06-07 17:32   ` Tanmay Shah
2022-06-07 17:32     ` Tanmay Shah
2022-06-09 17:33     ` Rob Herring
2022-06-09 17:33       ` Rob Herring
2022-06-10 16:18       ` Tanmay Shah
2022-06-10 16:18         ` Tanmay Shah
2022-06-02 20:38 ` [PATCH v8 2/6] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node Tanmay Shah
2022-06-02 20:38   ` Tanmay Shah
2022-06-02 20:38 ` [PATCH v8 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Tanmay Shah
2022-06-02 20:38   ` Tanmay Shah
2022-06-02 20:38 ` Tanmay Shah [this message]
2022-06-02 20:38   ` [PATCH v8 4/6] firmware: xilinx: Add shutdown/wakeup APIs Tanmay Shah
2022-06-02 20:38 ` [PATCH v8 5/6] firmware: xilinx: Add RPU configuration APIs Tanmay Shah
2022-06-02 20:38   ` Tanmay Shah
2022-06-02 20:38 ` [PATCH v8 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver Tanmay Shah
2022-06-02 20:38   ` Tanmay Shah
2022-06-02 21:07   ` Christophe JAILLET
2022-06-02 21:07     ` Christophe JAILLET
2022-06-07 13:03   ` Peter Korsgaard
2022-06-07 13:03     ` Peter Korsgaard
2022-06-07 16:52   ` Mathieu Poirier
2022-06-07 16:52     ` Mathieu Poirier
2022-06-13 20:59     ` Tanmay Shah
2022-06-13 20:59       ` Tanmay Shah
     [not found]     ` <2d905471-34f0-60d9-90f8-17ea34683836@amd.com>
2022-06-21 19:25       ` Mathieu Poirier
2022-06-21 19:25         ` Mathieu Poirier
2022-06-08 17:37   ` Mathieu Poirier
2022-06-08 17:37     ` Mathieu Poirier
2022-06-13 21:36     ` Tanmay Shah
2022-06-13 21:36       ` Tanmay Shah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220602203834.3675160-5-tanmay.shah@xilinx.com \
    --to=tanmay.shah@xilinx.com \
    --cc=ben.levinsky@xilinx.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=michal.simek@xilinx.com \
    --cc=openamp-system-reference@lists.openampproject.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.