From: Chanho Park <chanho61.park@samsung.com> To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Alim Akhtar <alim.akhtar@samsung.com> Cc: linux-phy@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Chanho Park <chanho61.park@samsung.com> Subject: [PATCH RESEND] phy: samsung: exynosautov9-ufs: correct TSRV register configurations Date: Fri, 3 Jun 2022 14:05:36 +0900 [thread overview] Message-ID: <20220603050536.61957-1-chanho61.park@samsung.com> (raw) In-Reply-To: CGME20220603050554epcas2p27d36b694e2f48cc796ddc34432c5808f@epcas2p2.samsung.com For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register configurations. So, it must be s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g Fixes: d64519249e1d ("phy: samsung-ufs: support exynosauto ufs phy driver") Signed-off-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- - Correct commit message of substitution command drivers/phy/samsung/phy-exynosautov9-ufs.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c index 36398a15c2db..d043dfdb598a 100644 --- a/drivers/phy/samsung/phy-exynosautov9-ufs.c +++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c @@ -31,22 +31,22 @@ static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = { PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY), PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY), - PHY_TRSV_REG_CFG(0x042, 0x5d, PWR_MODE_ANY), - PHY_TRSV_REG_CFG(0x043, 0x80, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY), END_UFS_PHY_CFG, }; /* Calibration for HS mode series A/B */ static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = { - PHY_TRSV_REG_CFG(0x032, 0xbc, PWR_MODE_HS_ANY), - PHY_TRSV_REG_CFG(0x03c, 0x7f, PWR_MODE_HS_ANY), - PHY_TRSV_REG_CFG(0x048, 0xc0, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY), - PHY_TRSV_REG_CFG(0x04a, 0x00, PWR_MODE_HS_G3_SER_B), - PHY_TRSV_REG_CFG(0x04b, 0x10, PWR_MODE_HS_G1_SER_B | - PWR_MODE_HS_G3_SER_B), - PHY_TRSV_REG_CFG(0x04d, 0x63, PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B | + PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B), END_UFS_PHY_CFG, }; -- 2.36.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Chanho Park <chanho61.park@samsung.com> To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Alim Akhtar <alim.akhtar@samsung.com> Cc: linux-phy@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Chanho Park <chanho61.park@samsung.com> Subject: [PATCH RESEND] phy: samsung: exynosautov9-ufs: correct TSRV register configurations Date: Fri, 3 Jun 2022 14:05:36 +0900 [thread overview] Message-ID: <20220603050536.61957-1-chanho61.park@samsung.com> (raw) In-Reply-To: CGME20220603050554epcas2p27d36b694e2f48cc796ddc34432c5808f@epcas2p2.samsung.com For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register configurations. So, it must be s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g Fixes: d64519249e1d ("phy: samsung-ufs: support exynosauto ufs phy driver") Signed-off-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- - Correct commit message of substitution command drivers/phy/samsung/phy-exynosautov9-ufs.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c index 36398a15c2db..d043dfdb598a 100644 --- a/drivers/phy/samsung/phy-exynosautov9-ufs.c +++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c @@ -31,22 +31,22 @@ static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = { PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY), PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY), - PHY_TRSV_REG_CFG(0x042, 0x5d, PWR_MODE_ANY), - PHY_TRSV_REG_CFG(0x043, 0x80, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY), END_UFS_PHY_CFG, }; /* Calibration for HS mode series A/B */ static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = { - PHY_TRSV_REG_CFG(0x032, 0xbc, PWR_MODE_HS_ANY), - PHY_TRSV_REG_CFG(0x03c, 0x7f, PWR_MODE_HS_ANY), - PHY_TRSV_REG_CFG(0x048, 0xc0, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY), + PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY), - PHY_TRSV_REG_CFG(0x04a, 0x00, PWR_MODE_HS_G3_SER_B), - PHY_TRSV_REG_CFG(0x04b, 0x10, PWR_MODE_HS_G1_SER_B | - PWR_MODE_HS_G3_SER_B), - PHY_TRSV_REG_CFG(0x04d, 0x63, PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B | + PWR_MODE_HS_G3_SER_B), + PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B), END_UFS_PHY_CFG, }; -- 2.36.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next parent reply other threads:[~2022-06-03 5:06 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <CGME20220603050554epcas2p27d36b694e2f48cc796ddc34432c5808f@epcas2p2.samsung.com> 2022-06-03 5:05 ` Chanho Park [this message] 2022-06-03 5:05 ` [PATCH RESEND] phy: samsung: exynosautov9-ufs: correct TSRV register configurations Chanho Park 2022-06-08 16:26 ` Vinod Koul 2022-06-08 16:26 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220603050536.61957-1-chanho61.park@samsung.com \ --to=chanho61.park@samsung.com \ --cc=alim.akhtar@samsung.com \ --cc=kishon@ti.com \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-phy@lists.infradead.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.