From: Randy Dunlap <rdunlap@infradead.org>
To: linux-kernel@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>,
kernel test robot <lkp@intel.com>,
Steve Lee <steve.lee.analog@gmail.com>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
alsa-devel@alsa-project.org
Subject: [PATCH] ASoC: max98390: use linux/gpio/consumer.h to fix build
Date: Sun, 5 Jun 2022 09:31:23 -0700 [thread overview]
Message-ID: <20220605163123.23537-1-rdunlap@infradead.org> (raw)
Change the header file to fix build errors in max98390.c:
../sound/soc/codecs/max98390.c: In function 'max98390_i2c_probe':
../sound/soc/codecs/max98390.c:1076:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
1076 | reset_gpio = devm_gpiod_get_optional(&i2c->dev,
../sound/soc/codecs/max98390.c:1077:55: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
1077 | "reset", GPIOD_OUT_HIGH);
../sound/soc/codecs/max98390.c:1077:55: note: each undeclared identifier is reported only once for each function it appears in
../sound/soc/codecs/max98390.c:1083:17: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
1083 | gpiod_set_value_cansleep(reset_gpio, 0);
Fixes: 397ff0249606 ("ASoC: max98390: Add reset gpio control")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Steve Lee <steve.lee.analog@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
---
sound/soc/codecs/max98390.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/codecs/max98390.c
+++ b/sound/soc/codecs/max98390.c
@@ -10,7 +10,7 @@
#include <linux/cdev.h>
#include <linux/dmi.h>
#include <linux/firmware.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
WARNING: multiple messages have this Message-ID (diff)
From: Randy Dunlap <rdunlap@infradead.org>
To: linux-kernel@vger.kernel.org
Cc: Steve Lee <steve.lee.analog@gmail.com>,
alsa-devel@alsa-project.org, kernel test robot <lkp@intel.com>,
Randy Dunlap <rdunlap@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>
Subject: [PATCH] ASoC: max98390: use linux/gpio/consumer.h to fix build
Date: Sun, 5 Jun 2022 09:31:23 -0700 [thread overview]
Message-ID: <20220605163123.23537-1-rdunlap@infradead.org> (raw)
Change the header file to fix build errors in max98390.c:
../sound/soc/codecs/max98390.c: In function 'max98390_i2c_probe':
../sound/soc/codecs/max98390.c:1076:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
1076 | reset_gpio = devm_gpiod_get_optional(&i2c->dev,
../sound/soc/codecs/max98390.c:1077:55: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
1077 | "reset", GPIOD_OUT_HIGH);
../sound/soc/codecs/max98390.c:1077:55: note: each undeclared identifier is reported only once for each function it appears in
../sound/soc/codecs/max98390.c:1083:17: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
1083 | gpiod_set_value_cansleep(reset_gpio, 0);
Fixes: 397ff0249606 ("ASoC: max98390: Add reset gpio control")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Steve Lee <steve.lee.analog@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
---
sound/soc/codecs/max98390.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/codecs/max98390.c
+++ b/sound/soc/codecs/max98390.c
@@ -10,7 +10,7 @@
#include <linux/cdev.h>
#include <linux/dmi.h>
#include <linux/firmware.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
next reply other threads:[~2022-06-05 16:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-05 16:31 Randy Dunlap [this message]
2022-06-05 16:31 ` [PATCH] ASoC: max98390: use linux/gpio/consumer.h to fix build Randy Dunlap
2022-06-07 10:45 ` Mark Brown
2022-06-07 10:45 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220605163123.23537-1-rdunlap@infradead.org \
--to=rdunlap@infradead.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkp@intel.com \
--cc=perex@perex.cz \
--cc=steve.lee.analog@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.