From: Conor Dooley <mail@conchuod.ie> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Andrew Lunn <andrew@lunn.ch>, Support Opensource <support.opensource@diasemi.com>, Lee Jones <lee.jones@linaro.org>, Ulf Hansson <ulf.hansson@linaro.org>, Palmer Dabbelt <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>, Steve Twiss <stwiss.opensource@diasemi.com> Cc: Conor Dooley <conor.dooley@microchip.com>, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-riscv@lists.infradead.org, Atul Khare <atulkhare@rivosinc.com>, Rob Herring <robh@kernel.org> Subject: [PATCH v3 3/4] dt-bindings: mfd: convert da9063 to yaml Date: Mon, 6 Jun 2022 21:13:43 +0100 [thread overview] Message-ID: <20220606201343.514391-4-mail@conchuod.ie> (raw) In-Reply-To: <20220606201343.514391-1-mail@conchuod.ie> From: Conor Dooley <conor.dooley@microchip.com> Convert the dt binding for the da9063/da9063l to yaml. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> --- .../devicetree/bindings/mfd/da9063.txt | 114 --------------- .../devicetree/bindings/mfd/dlg,da9063.yaml | 132 ++++++++++++++++++ .../devicetree/bindings/trivial-devices.yaml | 2 - MAINTAINERS | 1 + 4 files changed, 133 insertions(+), 116 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt create mode 100644 Documentation/devicetree/bindings/mfd/dlg,da9063.yaml diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt deleted file mode 100644 index aa8b800cc4ad..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9063.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) - -DA9063 consists of a large and varied group of sub-devices (I2C Only): - -Device Supply Names Description ------- ------------ ----------- -da9063-regulator : : LDOs & BUCKs -da9063-onkey : : On Key -da9063-rtc : : Real-Time Clock (DA9063 only) -da9063-watchdog : : Watchdog - -====== - -Required properties: - -- compatible : Should be "dlg,da9063" or "dlg,da9063l" -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9063(L) regulators are bound using their names listed below: - - bcore1 : BUCK CORE1 - bcore2 : BUCK CORE2 - bpro : BUCK PRO - bmem : BUCK MEM - bio : BUCK IO - bperi : BUCK PERI - ldo1 : LDO_1 (DA9063 only) - ldo2 : LDO_2 (DA9063 only) - ldo3 : LDO_3 - ldo4 : LDO_4 (DA9063 only) - ldo5 : LDO_5 (DA9063 only) - ldo6 : LDO_6 (DA9063 only) - ldo7 : LDO_7 - ldo8 : LDO_8 - ldo9 : LDO_9 - ldo10 : LDO_10 (DA9063 only) - ldo11 : LDO_11 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -- rtc : This node defines settings for the Real-Time Clock associated with - the DA9063 only. The RTC is not present in DA9063L. There are currently - no entries in this binding, however compatible = "dlg,da9063-rtc" should - be added if a node is created. - -- onkey : This node defines the OnKey settings for controlling the key - functionality of the device. The node should contain the compatible property - with the value "dlg,da9063-onkey". - - Optional onkey properties: - - - dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press. If this entry does not exist then by default the key-press - triggered power down is enabled and the OnKey will support both KEY_POWER - and KEY_SLEEP. - -- watchdog : This node defines settings for the Watchdog timer associated - with the DA9063 and DA9063L. The node should contain the compatible property - with the value "dlg,da9063-watchdog". - - Optional watchdog properties: - - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). - -Example: - - pmic0: da9063@58 { - compatible = "dlg,da9063" - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - - regulators { - DA9063_BCORE1: bcore1 { - regulator-name = "BCORE1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-boot-on; - }; - DA9063_LDO11: ldo11 { - regulator-name = "LDO_11"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml new file mode 100644 index 000000000000..d71933460e90 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) + +maintainers: + - Steve Twiss <stwiss.opensource@diasemi.com> + +description: | + For device-tree bindings of other sub-modules refer to the binding documents + under the respective sub-system directories. + +properties: + compatible: + enum: + - dlg,da9063 + - dlg,da9063l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + dlg,use-sw-pm: + type: boolean + description: + Disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). + + watchdog: + type: object + $ref: /schemas/watchdog/watchdog.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-watchdog + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-rtc + + onkey: + type: object + $ref: /schemas/input/input.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-onkey + + dlg,disable-key-power: + type: boolean + description: | + Disable power-down using a long key-press. + If this entry does not exist then by default the key-press triggered + power down is enabled and the OnKey will support both KEY_POWER and + KEY_SLEEP. + + regulators: + type: object + patternProperties: + "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + #interrupt-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + regulators { + regulator-bcore1 { + regulator-name = "BCORE1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + regulator-ldo11 { + regulator-name = "LDO_11"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 6aafa71806a3..00acb9078cc0 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -93,8 +93,6 @@ properties: - dh,dhcom-board # DA9053: flexible system level PMIC with multicore support - dlg,da9053 - # DA9063: system PMIC for quad-core application processors - - dlg,da9063 # DMARD05: 3-axis I2C Accelerometer - domintech,dmard05 # DMARD06: 3-axis I2C Accelerometer diff --git a/MAINTAINERS b/MAINTAINERS index cfaf02fc9191..777b453593ad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5831,6 +5831,7 @@ W: http://www.dialog-semiconductor.com/products F: Documentation/devicetree/bindings/input/da90??-onkey.txt F: Documentation/devicetree/bindings/input/dlg,da72??.txt F: Documentation/devicetree/bindings/mfd/da90*.txt +F: Documentation/devicetree/bindings/mfd/da90*.yaml F: Documentation/devicetree/bindings/regulator/dlg,da9*.yaml F: Documentation/devicetree/bindings/regulator/da92*.txt F: Documentation/devicetree/bindings/regulator/slg51000.txt -- 2.36.1
WARNING: multiple messages have this Message-ID (diff)
From: Conor Dooley <mail@conchuod.ie> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Andrew Lunn <andrew@lunn.ch>, Support Opensource <support.opensource@diasemi.com>, Lee Jones <lee.jones@linaro.org>, Ulf Hansson <ulf.hansson@linaro.org>, Palmer Dabbelt <palmer@dabbelt.com>, Paul Walmsley <paul.walmsley@sifive.com>, Albert Ou <aou@eecs.berkeley.edu>, Steve Twiss <stwiss.opensource@diasemi.com> Cc: Conor Dooley <conor.dooley@microchip.com>, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-riscv@lists.infradead.org, Atul Khare <atulkhare@rivosinc.com>, Rob Herring <robh@kernel.org> Subject: [PATCH v3 3/4] dt-bindings: mfd: convert da9063 to yaml Date: Mon, 6 Jun 2022 21:13:43 +0100 [thread overview] Message-ID: <20220606201343.514391-4-mail@conchuod.ie> (raw) In-Reply-To: <20220606201343.514391-1-mail@conchuod.ie> From: Conor Dooley <conor.dooley@microchip.com> Convert the dt binding for the da9063/da9063l to yaml. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> --- .../devicetree/bindings/mfd/da9063.txt | 114 --------------- .../devicetree/bindings/mfd/dlg,da9063.yaml | 132 ++++++++++++++++++ .../devicetree/bindings/trivial-devices.yaml | 2 - MAINTAINERS | 1 + 4 files changed, 133 insertions(+), 116 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt create mode 100644 Documentation/devicetree/bindings/mfd/dlg,da9063.yaml diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt deleted file mode 100644 index aa8b800cc4ad..000000000000 --- a/Documentation/devicetree/bindings/mfd/da9063.txt +++ /dev/null @@ -1,114 +0,0 @@ -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) - -DA9063 consists of a large and varied group of sub-devices (I2C Only): - -Device Supply Names Description ------- ------------ ----------- -da9063-regulator : : LDOs & BUCKs -da9063-onkey : : On Key -da9063-rtc : : Real-Time Clock (DA9063 only) -da9063-watchdog : : Watchdog - -====== - -Required properties: - -- compatible : Should be "dlg,da9063" or "dlg,da9063l" -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9063(L) regulators are bound using their names listed below: - - bcore1 : BUCK CORE1 - bcore2 : BUCK CORE2 - bpro : BUCK PRO - bmem : BUCK MEM - bio : BUCK IO - bperi : BUCK PERI - ldo1 : LDO_1 (DA9063 only) - ldo2 : LDO_2 (DA9063 only) - ldo3 : LDO_3 - ldo4 : LDO_4 (DA9063 only) - ldo5 : LDO_5 (DA9063 only) - ldo6 : LDO_6 (DA9063 only) - ldo7 : LDO_7 - ldo8 : LDO_8 - ldo9 : LDO_9 - ldo10 : LDO_10 (DA9063 only) - ldo11 : LDO_11 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -- rtc : This node defines settings for the Real-Time Clock associated with - the DA9063 only. The RTC is not present in DA9063L. There are currently - no entries in this binding, however compatible = "dlg,da9063-rtc" should - be added if a node is created. - -- onkey : This node defines the OnKey settings for controlling the key - functionality of the device. The node should contain the compatible property - with the value "dlg,da9063-onkey". - - Optional onkey properties: - - - dlg,disable-key-power : Disable power-down using a long key-press. If this - entry exists the OnKey driver will remove support for the KEY_POWER key - press. If this entry does not exist then by default the key-press - triggered power down is enabled and the OnKey will support both KEY_POWER - and KEY_SLEEP. - -- watchdog : This node defines settings for the Watchdog timer associated - with the DA9063 and DA9063L. The node should contain the compatible property - with the value "dlg,da9063-watchdog". - - Optional watchdog properties: - - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). - -Example: - - pmic0: da9063@58 { - compatible = "dlg,da9063" - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - - onkey { - compatible = "dlg,da9063-onkey"; - dlg,disable-key-power; - }; - - regulators { - DA9063_BCORE1: bcore1 { - regulator-name = "BCORE1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-boot-on; - }; - DA9063_LDO11: ldo11 { - regulator-name = "LDO_11"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml new file mode 100644 index 000000000000..d71933460e90 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) + +maintainers: + - Steve Twiss <stwiss.opensource@diasemi.com> + +description: | + For device-tree bindings of other sub-modules refer to the binding documents + under the respective sub-system directories. + +properties: + compatible: + enum: + - dlg,da9063 + - dlg,da9063l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + dlg,use-sw-pm: + type: boolean + description: + Disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). + + watchdog: + type: object + $ref: /schemas/watchdog/watchdog.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-watchdog + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-rtc + + onkey: + type: object + $ref: /schemas/input/input.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-onkey + + dlg,disable-key-power: + type: boolean + description: | + Disable power-down using a long key-press. + If this entry does not exist then by default the key-press triggered + power down is enabled and the OnKey will support both KEY_POWER and + KEY_SLEEP. + + regulators: + type: object + patternProperties: + "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + #interrupt-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + regulators { + regulator-bcore1 { + regulator-name = "BCORE1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + regulator-ldo11 { + regulator-name = "LDO_11"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 6aafa71806a3..00acb9078cc0 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -93,8 +93,6 @@ properties: - dh,dhcom-board # DA9053: flexible system level PMIC with multicore support - dlg,da9053 - # DA9063: system PMIC for quad-core application processors - - dlg,da9063 # DMARD05: 3-axis I2C Accelerometer - domintech,dmard05 # DMARD06: 3-axis I2C Accelerometer diff --git a/MAINTAINERS b/MAINTAINERS index cfaf02fc9191..777b453593ad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5831,6 +5831,7 @@ W: http://www.dialog-semiconductor.com/products F: Documentation/devicetree/bindings/input/da90??-onkey.txt F: Documentation/devicetree/bindings/input/dlg,da72??.txt F: Documentation/devicetree/bindings/mfd/da90*.txt +F: Documentation/devicetree/bindings/mfd/da90*.yaml F: Documentation/devicetree/bindings/regulator/dlg,da9*.yaml F: Documentation/devicetree/bindings/regulator/da92*.txt F: Documentation/devicetree/bindings/regulator/slg51000.txt -- 2.36.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-06-06 20:14 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-06 20:13 [PATCH v3 0/4] clear riscv dtbs_check errors Conor Dooley 2022-06-06 20:13 ` Conor Dooley 2022-06-06 20:13 ` [PATCH v3 1/4] dt-bindings: mmc: convert mmc-spi-slot to yaml Conor Dooley 2022-06-06 20:13 ` Conor Dooley 2022-06-07 10:43 ` Ulf Hansson 2022-06-07 10:43 ` Ulf Hansson 2022-06-06 20:13 ` [PATCH v3 2/4] dt-bindings: i2c: convert ocores binding " Conor Dooley 2022-06-06 20:13 ` Conor Dooley 2022-06-08 19:50 ` Wolfram Sang 2022-06-08 19:50 ` Wolfram Sang 2022-06-06 20:13 ` Conor Dooley [this message] 2022-06-06 20:13 ` [PATCH v3 3/4] dt-bindings: mfd: convert da9063 " Conor Dooley 2022-06-08 7:48 ` Lee Jones 2022-06-08 7:48 ` Lee Jones 2022-06-06 20:13 ` [PATCH v3 4/4] riscv: dts: sifive: "fix" pmic watchdog node name Conor Dooley 2022-06-06 20:13 ` Conor Dooley 2022-06-13 13:33 ` Conor.Dooley 2022-06-13 13:33 ` Conor.Dooley 2022-06-13 14:05 ` Heiko Stübner 2022-06-13 14:05 ` Heiko Stübner 2022-06-27 15:58 ` Conor.Dooley 2022-06-27 15:58 ` Conor.Dooley 2022-07-04 16:10 ` Conor.Dooley 2022-07-04 16:10 ` Conor.Dooley 2022-07-14 22:04 ` Palmer Dabbelt 2022-07-14 22:04 ` Palmer Dabbelt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220606201343.514391-4-mail@conchuod.ie \ --to=mail@conchuod.ie \ --cc=andrew@lunn.ch \ --cc=aou@eecs.berkeley.edu \ --cc=atulkhare@rivosinc.com \ --cc=conor.dooley@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lee.jones@linaro.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=stwiss.opensource@diasemi.com \ --cc=support.opensource@diasemi.com \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.