All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
To: "Michael S. Tsirkin" <mst@redhat.com>,
	Jason Wang <jasowang@redhat.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	Jesper Dangaard Brouer <hawk@kernel.org>,
	John Fastabend <john.fastabend@gmail.com>
Cc: netdev@vger.kernel.org, bpf@vger.kernel.org,
	Stephan Gerhold <stephan.gerhold@kernkonzept.com>,
	linux-kernel@vger.kernel.org,
	virtualization@lists.linux-foundation.org
Subject: [PATCH net] virtio_net: fix xdp_rxq_info bug after suspend/resume
Date: Tue, 21 Jun 2022 13:48:44 +0200	[thread overview]
Message-ID: <20220621114845.3650258-1-stephan.gerhold@kernkonzept.com> (raw)

The following sequence currently causes a driver bug warning
when using virtio_net:

  # ip link set eth0 up
  # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem)
  <resume>
  # ip link set eth0 down

  Missing register, driver bug
  WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60
  Call trace:
   xdp_rxq_info_unreg+0x58/0x60
   virtnet_close+0x58/0xac
   __dev_close_many+0xac/0x140
   __dev_change_flags+0xd8/0x210
   dev_change_flags+0x24/0x64
   do_setlink+0x230/0xdd0
   ...

This happens because virtnet_freeze() frees the receive_queue
completely (including struct xdp_rxq_info) but does not call
xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the
receive_queue again but does not call xdp_rxq_info_reg().

Actually, parts of virtnet_freeze_down() and virtnet_restore_up()
are almost identical to virtnet_close() and virtnet_open(): only
the calls to xdp_rxq_info_(un)reg() are missing. This means that
we can fix this easily and avoid such problems in the future by
just calling virtnet_close()/open() from the freeze/restore handlers.

Aside from adding the missing xdp_rxq_info calls the only difference
is that the refill work is only cancelled if netif_running(). However,
this should not make any functional difference since the refill work
should only be active if the network interface is actually up.

Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
 drivers/net/virtio_net.c | 25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index db05b5e930be..969a67970e71 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2768,7 +2768,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
 static void virtnet_freeze_down(struct virtio_device *vdev)
 {
 	struct virtnet_info *vi = vdev->priv;
-	int i;
 
 	/* Make sure no work handler is accessing the device */
 	flush_work(&vi->config_work);
@@ -2776,14 +2775,8 @@ static void virtnet_freeze_down(struct virtio_device *vdev)
 	netif_tx_lock_bh(vi->dev);
 	netif_device_detach(vi->dev);
 	netif_tx_unlock_bh(vi->dev);
-	cancel_delayed_work_sync(&vi->refill);
-
-	if (netif_running(vi->dev)) {
-		for (i = 0; i < vi->max_queue_pairs; i++) {
-			napi_disable(&vi->rq[i].napi);
-			virtnet_napi_tx_disable(&vi->sq[i].napi);
-		}
-	}
+	if (netif_running(vi->dev))
+		virtnet_close(vi->dev);
 }
 
 static int init_vqs(struct virtnet_info *vi);
@@ -2791,7 +2784,7 @@ static int init_vqs(struct virtnet_info *vi);
 static int virtnet_restore_up(struct virtio_device *vdev)
 {
 	struct virtnet_info *vi = vdev->priv;
-	int err, i;
+	int err;
 
 	err = init_vqs(vi);
 	if (err)
@@ -2800,15 +2793,9 @@ static int virtnet_restore_up(struct virtio_device *vdev)
 	virtio_device_ready(vdev);
 
 	if (netif_running(vi->dev)) {
-		for (i = 0; i < vi->curr_queue_pairs; i++)
-			if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL))
-				schedule_delayed_work(&vi->refill, 0);
-
-		for (i = 0; i < vi->max_queue_pairs; i++) {
-			virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
-			virtnet_napi_tx_enable(vi, vi->sq[i].vq,
-					       &vi->sq[i].napi);
-		}
+		err = virtnet_open(vi->dev);
+		if (err)
+			return err;
 	}
 
 	netif_tx_lock_bh(vi->dev);
-- 
2.30.2

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

WARNING: multiple messages have this Message-ID (diff)
From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
To: "Michael S. Tsirkin" <mst@redhat.com>,
	Jason Wang <jasowang@redhat.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	Jesper Dangaard Brouer <hawk@kernel.org>,
	John Fastabend <john.fastabend@gmail.com>
Cc: Stephan Gerhold <stephan.gerhold@kernkonzept.com>,
	virtualization@lists.linux-foundation.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	bpf@vger.kernel.org
Subject: [PATCH net] virtio_net: fix xdp_rxq_info bug after suspend/resume
Date: Tue, 21 Jun 2022 13:48:44 +0200	[thread overview]
Message-ID: <20220621114845.3650258-1-stephan.gerhold@kernkonzept.com> (raw)

The following sequence currently causes a driver bug warning
when using virtio_net:

  # ip link set eth0 up
  # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem)
  <resume>
  # ip link set eth0 down

  Missing register, driver bug
  WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60
  Call trace:
   xdp_rxq_info_unreg+0x58/0x60
   virtnet_close+0x58/0xac
   __dev_close_many+0xac/0x140
   __dev_change_flags+0xd8/0x210
   dev_change_flags+0x24/0x64
   do_setlink+0x230/0xdd0
   ...

This happens because virtnet_freeze() frees the receive_queue
completely (including struct xdp_rxq_info) but does not call
xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the
receive_queue again but does not call xdp_rxq_info_reg().

Actually, parts of virtnet_freeze_down() and virtnet_restore_up()
are almost identical to virtnet_close() and virtnet_open(): only
the calls to xdp_rxq_info_(un)reg() are missing. This means that
we can fix this easily and avoid such problems in the future by
just calling virtnet_close()/open() from the freeze/restore handlers.

Aside from adding the missing xdp_rxq_info calls the only difference
is that the refill work is only cancelled if netif_running(). However,
this should not make any functional difference since the refill work
should only be active if the network interface is actually up.

Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
 drivers/net/virtio_net.c | 25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index db05b5e930be..969a67970e71 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2768,7 +2768,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
 static void virtnet_freeze_down(struct virtio_device *vdev)
 {
 	struct virtnet_info *vi = vdev->priv;
-	int i;
 
 	/* Make sure no work handler is accessing the device */
 	flush_work(&vi->config_work);
@@ -2776,14 +2775,8 @@ static void virtnet_freeze_down(struct virtio_device *vdev)
 	netif_tx_lock_bh(vi->dev);
 	netif_device_detach(vi->dev);
 	netif_tx_unlock_bh(vi->dev);
-	cancel_delayed_work_sync(&vi->refill);
-
-	if (netif_running(vi->dev)) {
-		for (i = 0; i < vi->max_queue_pairs; i++) {
-			napi_disable(&vi->rq[i].napi);
-			virtnet_napi_tx_disable(&vi->sq[i].napi);
-		}
-	}
+	if (netif_running(vi->dev))
+		virtnet_close(vi->dev);
 }
 
 static int init_vqs(struct virtnet_info *vi);
@@ -2791,7 +2784,7 @@ static int init_vqs(struct virtnet_info *vi);
 static int virtnet_restore_up(struct virtio_device *vdev)
 {
 	struct virtnet_info *vi = vdev->priv;
-	int err, i;
+	int err;
 
 	err = init_vqs(vi);
 	if (err)
@@ -2800,15 +2793,9 @@ static int virtnet_restore_up(struct virtio_device *vdev)
 	virtio_device_ready(vdev);
 
 	if (netif_running(vi->dev)) {
-		for (i = 0; i < vi->curr_queue_pairs; i++)
-			if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL))
-				schedule_delayed_work(&vi->refill, 0);
-
-		for (i = 0; i < vi->max_queue_pairs; i++) {
-			virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
-			virtnet_napi_tx_enable(vi, vi->sq[i].vq,
-					       &vi->sq[i].napi);
-		}
+		err = virtnet_open(vi->dev);
+		if (err)
+			return err;
 	}
 
 	netif_tx_lock_bh(vi->dev);
-- 
2.30.2


             reply	other threads:[~2022-06-21 11:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-21 11:48 Stephan Gerhold [this message]
2022-06-21 11:48 ` [PATCH net] virtio_net: fix xdp_rxq_info bug after suspend/resume Stephan Gerhold
2022-06-21 16:55 ` Jesper Dangaard Brouer
2022-06-22  8:06 ` Jason Wang
2022-06-22  8:06   ` Jason Wang
2022-06-23  2:20 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220621114845.3650258-1-stephan.gerhold@kernkonzept.com \
    --to=stephan.gerhold@kernkonzept.com \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=jasowang@redhat.com \
    --cc=john.fastabend@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.