All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>,
	Amit Pundir <amit.pundir@linaro.org>,
	Trilok Soni <quic_tsoni@quicinc.com>,
	Rob Clark <robdclark@gmail.com>,
	Stephan Gerhold <stephan@gerhold.net>,
	Stephen Boyd <sboyd@kernel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Kumar Gala <galak@codeaurora.org>
Subject: [PATCH v3 1/2] dt-bindings: arm: qcom: document qcom,msm-id and qcom,board-id
Date: Wed, 22 Jun 2022 13:48:55 +0200	[thread overview]
Message-ID: <20220622114856.6243-2-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20220622114856.6243-1-krzysztof.kozlowski@linaro.org>

The top level qcom,msm-id and qcom,board-id properties are utilized by
bootloaders on Qualcomm MSM platforms to determine which device tree
should be used and passed to the kernel.

The commit b32e592d3c28 ("devicetree: bindings: Document qcom board
compatible format") from 2015 was a consensus during discussion about
upstreaming qcom,msm-id and qcom,board-id fields.  There are however still
problems with that consensus:
1. It was reached 7 years ago but it turned out its implementation did
   not reach all possible products.

2. Initially additional tool (dtbTool) was needed for parsing these
   fields to create a QCDT image consisting of multiple DTBs, later the
   bootloaders were improved and they use these qcom,msm-id and
   qcom,board-id properties directly.

3. Extracting relevant information from the board compatible requires
   this additional tool (dtbTool), which makes the build process more
   complicated and not easily reproducible (DTBs are modified after the
   kernel build).

4. Some versions of Qualcomm bootloaders expect these properties even
   when booting with a single DTB.  The community is stuck with these
   bootloaders thus they require properties in the DTBs.

Since several upstreamed Qualcomm SoC-based boards require these
properties to properly boot and the properties are reportedly used by
bootloaders, document them.

Link: https://lore.kernel.org/r/a3c932d1-a102-ce18-deea-18cbbd05ecab@linaro.org/
Co-developed-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../devicetree/bindings/arm/qcom.yaml         | 121 ++++++++++++++++++
 include/dt-bindings/arm/qcom,ids.h            |  30 +++++
 2 files changed, 151 insertions(+)
 create mode 100644 include/dt-bindings/arm/qcom,ids.h

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 6c38c1387afd..431e3ff31d75 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -403,6 +403,127 @@ properties:
               - qcom,sm8450-qrd
           - const: qcom,sm8450
 
+  # Board compatibles go above
+
+  qcom,msm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    items:
+      items:
+        - description: |
+            MSM chipset ID - an exact match value consisting of two bitfields::
+             - bits 0-15  - The unique MSM chipset ID
+             - bits 16-31 - Reserved; should be 0
+        - description: |
+            Hardware revision ID - a chipset specific 32-bit ID representing
+            the version of the chipset.  It is best a match value - the
+            bootloader will look for the closest possible match.
+    deprecated: true
+    description:
+      The MSM chipset and hardware revision use by Qualcomm bootloaders.  It
+      can optionally be an array of these to indicate multiple hardware that
+      use the same device tree.  It is expected that the bootloader will use
+      this information at boot-up to decide which device tree to use when given
+      multiple device trees, some of which may not be compatible with the
+      actual hardware.  It is the bootloader's responsibility to pass the
+      correct device tree to the kernel.
+      The property is deprecated.
+
+  qcom,board-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    items:
+      oneOf:
+        - maxItems: 2
+          items:
+            - description: |
+                Board ID consisting of three bitfields::
+                  - bits 31-24 - Unused
+                  - bits 23-16 - Platform Version Major
+                  - bits 15-8  - Platform Version Minor
+                  - bits 7-0   - Platform Type
+                Platform Type field is an exact match value.  The
+                Platform Major/Minor field is a best match.  The bootloader will
+                look for the closest possible match.
+            - description: |
+                Subtype ID unique to a Platform Type/Chipset ID.  For a given
+                Platform Type, there will typically only be a single board and the
+                subtype_id will be 0.  However in some cases board variants may
+                need to be distinguished by different subtype_id values.
+        # OnePlus uses a variant of board-id with four elements:
+        - minItems: 4
+          items:
+            - const: 8
+            - const: 0
+            - description: OnePlus board ID
+            - description: OnePlus subtype ID
+    deprecated: true
+    description:
+      The board type and revision information.  It can optionally be an array
+      of these to indicate multiple boards that use the same device tree.  It
+      is expected that the bootloader will use this information at boot-up to
+      decide which device tree to use when given multiple device trees, some of
+      which may not be compatible with the actual hardware.  It is the
+      bootloader's responsibility to pass the correct device tree to the
+      kernel
+      The property is deprecated.
+
+allOf:
+  # Explicit allow-list for older SoCs. The legacy properties are not allowed
+  # on newer SoCs.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8026
+              - qcom,apq8094
+              - qcom,apq8096
+              - qcom,msm8992
+              - qcom,msm8994
+              - qcom,msm8996
+              - qcom,msm8998
+              - qcom,sdm630
+              - qcom,sdm632
+              - qcom,sdm845
+              - qcom,sdx55
+              - qcom,sdx65
+              - qcom,sm6125
+              - qcom,sm6350
+              - qcom,sm7225
+              - qcom,sm8150
+              - qcom,sm8250
+    then:
+      properties:
+        qcom,board-id: true
+        qcom,msm-id: true
+    else:
+      properties:
+        qcom,board-id: false
+        qcom,msm-id: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - oneplus,enchilada
+              - oneplus,fajita
+    then:
+      properties:
+        qcom,board-id:
+          items:
+            minItems: 4
+    else:
+      properties:
+        qcom,board-id:
+          items:
+            maxItems: 2
+
 additionalProperties: true
 
 ...
diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
new file mode 100644
index 000000000000..df4a07b898cc
--- /dev/null
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org> based on previous work of Kumar Gala.
+ */
+#ifndef _DT_BINDINGS_ARM_QCOM_IDS_H
+#define _DT_BINDINGS_ARM_QCOM_IDS_H
+
+/* qcom,msm-id */
+#define QCOM_ID_APQ8026				199
+#define QCOM_ID_MSM8916				206
+#define QCOM_ID_MSM8994				207
+#define QCOM_ID_MSM8996				246
+#define QCOM_ID_APQ8016				247
+#define QCOM_ID_MSM8216				248
+#define QCOM_ID_MSM8116				249
+#define QCOM_ID_MSM8616				250
+#define QCOM_ID_MSM8998				292
+#define QCOM_ID_SDM845				321
+
+/* qcom,board-id */
+#define QCOM_BOARD_ID(a, major, minor) \
+	(((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BOARD_ID_##a)
+
+#define QCOM_BOARD_ID_MTP			8
+#define QCOM_BOARD_ID_DRAGONBOARD		10
+#define QCOM_BOARD_ID_SBC			24
+
+#endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */
-- 
2.34.1


  reply	other threads:[~2022-06-22 11:49 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-22 11:48 [PATCH v3 0/2] dt-bindings: arm: qcom: qcom,board-id and qcom,msm-id Krzysztof Kozlowski
2022-06-22 11:48 ` Krzysztof Kozlowski [this message]
2022-06-22 11:56   ` [PATCH v3 1/2] dt-bindings: arm: qcom: document qcom,msm-id and qcom,board-id Konrad Dybcio
2022-06-23  9:42     ` Krzysztof Kozlowski
2022-06-22 11:48 ` [PATCH v3 2/2] arm64: dts: qcom: msm8992-xiaomi-libra: split qcom,msm-id into tuples Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220622114856.6243-2-krzysztof.kozlowski@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=agross@kernel.org \
    --cc=amit.pundir@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=galak@codeaurora.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_tsoni@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=stephan@gerhold.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.