All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Brace <kevinbrace@gmx.com>
To: dri-devel@lists.freedesktop.org
Cc: Kevin Brace <kevinbrace@bracecomputerlab.com>
Subject: [PATCH 03/28] drm/via: Add via_disp_reg.h
Date: Fri, 24 Jun 2022 15:26:08 -0500	[thread overview]
Message-ID: <20220624202633.3978-4-kevinbrace@gmx.com> (raw)
In-Reply-To: <20220624202633.3978-1-kevinbrace@gmx.com>

From: Kevin Brace <kevinbrace@bracecomputerlab.com>

Likely originated from VIA Technologies.

Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com>
---
 drivers/gpu/drm/via/via_disp_reg.h | 513 +++++++++++++++++++++++++++++
 1 file changed, 513 insertions(+)
 create mode 100644 drivers/gpu/drm/via/via_disp_reg.h

diff --git a/drivers/gpu/drm/via/via_disp_reg.h b/drivers/gpu/drm/via/via_disp_reg.h
new file mode 100644
index 000000000000..e2bd895bb495
--- /dev/null
+++ b/drivers/gpu/drm/via/via_disp_reg.h
@@ -0,0 +1,513 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2009 S3 Graphics, Inc. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __VIA_DISP_REG_H__
+#define __VIA_DISP_REG_H__
+
+/********************************************************/
+/* Definition IGA Design Method of FIFO Registers	*/
+/********************************************************/
+#define IGA1_FIFO_DEPTH_SELECT_FORMULA(x)		((x >> 1) - 1)
+#define IGA2_FIFO_DEPTH_SELECT_FORMULA(x)		((x >> 3) - 1)
+
+/* Define Display OFFSET */
+/* VT3314 chipset */
+#define CN700_IGA1_FIFO_MAX_DEPTH		96	/* location: {SR17,0,7}*/
+#define CN700_IGA1_FIFO_THRESHOLD		80	/* location: {SR16,0,5},{SR16,7,7}*/
+#define CN700_IGA1_FIFO_HIGH_THRESHOLD		64	/* location: {SR18,0,5},{SR18,7,7}*/
+#define CN700_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	128	/* location: {SR22,0,4}. (128/4) =64,
+							 * P800 must be set zero, because HW
+							 * only 5 bits */
+#define CN700_IGA2_FIFO_MAX_DEPTH		96	/* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/
+#define CN700_IGA2_FIFO_THRESHOLD		80	/* location: {CR68,0,3},{CR95,4,6}*/
+#define CN700_IGA2_FIFO_HIGH_THRESHOLD		32	/* location: {CR92,0,3},{CR95,0,2}*/
+#define CN700_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	128	/* location: {CR94,0,6}*/
+
+/* For VT3324, these values are suggested by HW */
+#define CX700_IGA1_FIFO_MAX_DEPTH		192	/* location: {SR17,0,7}*/
+#define CX700_IGA1_FIFO_THRESHOLD		128	/* location: {SR16,0,5},{SR16,7,7}*/
+#define CX700_IGA1_FIFO_HIGH_THRESHOLD		128	/* location: {SR18,0,5},{SR18,7,7} */
+#define CX700_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	124	/* location: {SR22,0,4} */
+
+#define CX700_IGA2_FIFO_MAX_DEPTH		96	/* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/
+#define CX700_IGA2_FIFO_THRESHOLD		64	/* location: {CR68,0,3},{CR95,4,6}*/
+#define CX700_IGA2_FIFO_HIGH_THRESHOLD		32	/* location: {CR92,0,3},{CR95,0,2} */
+#define CX700_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	128	/* location: {CR94,0,6}*/
+
+/* VT3336 chipset */
+#define K8M890_IGA1_FIFO_MAX_DEPTH		360	/* location: {SR17,0,7}*/
+#define K8M890_IGA1_FIFO_THRESHOLD		328	/* location: {SR16,0,5},{SR16,7,7}*/
+#define K8M890_IGA1_FIFO_HIGH_THRESHOLD		296	/* location: {SR18,0,5},{SR18,7,7}*/
+#define K8M890_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	124	/* location: {SR22,0,4}.*/
+
+#define K8M890_IGA2_FIFO_MAX_DEPTH		360	/* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/
+#define K8M890_IGA2_FIFO_THRESHOLD		328	/* location: {CR68,0,3},{CR95,4,6}*/
+#define K8M890_IGA2_FIFO_HIGH_THRESHOLD		296	/* location: {CR92,0,3},{CR95,0,2}*/
+#define K8M890_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	124	/* location: {CR94,0,6}*/
+
+/* VT3327 chipset */
+#define P4M890_IGA1_FIFO_MAX_DEPTH		96	/* location: {SR17,0,7}*/
+#define P4M890_IGA1_FIFO_THRESHOLD		76	/* location: {SR16,0,5},{SR16,7,7}*/
+#define P4M890_IGA1_FIFO_HIGH_THRESHOLD		64	/* location: {SR18,0,5},{SR18,7,7}*/
+#define P4M890_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	32	/* location: {SR22,0,4}. (32/4) =8*/
+
+#define P4M890_IGA2_FIFO_MAX_DEPTH		96	/* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/
+#define P4M890_IGA2_FIFO_THRESHOLD		76	/* location: {CR68,0,3},{CR95,4,6}*/
+#define P4M890_IGA2_FIFO_HIGH_THRESHOLD		64	/* location: {CR92,0,3},{CR95,0,2}*/
+#define P4M890_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	32	/* location: {CR94,0,6}*/
+
+/* VT3364 chipset */
+#define P4M900_IGA1_FIFO_MAX_DEPTH		96	/* location: {SR17,0,7}*/
+#define P4M900_IGA1_FIFO_THRESHOLD		76	/* location: {SR16,0,5},{SR16,7,7}*/
+#define P4M900_IGA1_FIFO_HIGH_THRESHOLD		76	/* location: {SR18,0,5},{SR18,7,7}*/
+#define P4M900_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	32	/* location: {SR22,0,4}.*/
+
+#define P4M900_IGA2_FIFO_MAX_DEPTH		96	/* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/
+#define P4M900_IGA2_FIFO_THRESHOLD		76	/* location: {CR68,0,3},{CR95,4,6}*/
+#define P4M900_IGA2_FIFO_HIGH_THRESHOLD		76	/* location: {CR92,0,3},{CR95,0,2}*/
+#define P4M900_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	32	/* location: {CR94,0,6}*/
+
+/* For VT3353, these values are suggested by HW */
+#define VX800_IGA1_FIFO_MAX_DEPTH		192	/* location: {SR17,0,7}*/
+#define VX800_IGA1_FIFO_THRESHOLD		152	/* location: {SR16,0,5},{SR16,7,7}*/
+#define VX800_IGA1_FIFO_HIGH_THRESHOLD		152	/* location: {SR18,0,5},{SR18,7,7} */
+#define VX800_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	64	/* location: {SR22,0,4} */
+
+#define VX800_IGA2_FIFO_MAX_DEPTH		96	/* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/
+#define VX800_IGA2_FIFO_THRESHOLD		64	/* location: {CR68,0,3},{CR95,4,6}*/
+#define VX800_IGA2_FIFO_HIGH_THRESHOLD		32	/* location: {CR92,0,3},{CR95,0,2} */
+#define VX800_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	128	/* location: {CR94,0,6}*/
+
+/* For VT3409 */
+#define VX855_IGA1_FIFO_MAX_DEPTH		400
+#define VX855_IGA1_FIFO_THRESHOLD		320
+#define VX855_IGA1_FIFO_HIGH_THRESHOLD		320
+#define VX855_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	160
+
+#define VX855_IGA2_FIFO_MAX_DEPTH		200
+#define VX855_IGA2_FIFO_THRESHOLD		160
+#define VX855_IGA2_FIFO_HIGH_THRESHOLD		160
+#define VX855_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	320
+
+/* For VT3410 */
+#define VX900_IGA1_FIFO_MAX_DEPTH		400
+#define VX900_IGA1_FIFO_THRESHOLD		320
+#define VX900_IGA1_FIFO_HIGH_THRESHOLD		320
+#define VX900_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	160
+
+#define VX900_IGA2_FIFO_MAX_DEPTH		192
+#define VX900_IGA2_FIFO_THRESHOLD		160
+#define VX900_IGA2_FIFO_HIGH_THRESHOLD		160
+#define VX900_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	320
+
+#ifdef VIA_VT3293_SUPPORT
+/* For VT3293 */
+#define CN750_IGA1_FIFO_MAX_DEPTH		96
+#define CN750_IGA1_FIFO_THRESHOLD		76
+#define CN750_IGA1_FIFO_HIGH_THRESHOLD		76
+#define CN750_IGA1_DISPLAY_QUEUE_EXPIRE_NUM	32
+
+#define CN750_IGA2_FIFO_MAX_DEPTH		96
+#define CN750_IGA2_FIFO_THRESHOLD		76
+#define CN750_IGA2_FIFO_HIGH_THRESHOLD		76
+#define CN750_IGA2_DISPLAY_QUEUE_EXPIRE_NUM	32
+#endif
+
+/* CLE266 and KM400 IGA1 FIFO Depth Select */
+static struct vga_regset iga1_cle266_fifo_depth_select[] = {
+	{ VGA_SEQ_I, 0x17, 0, 6 }
+};
+
+/* K8M800 or later IGA1 FIFO Depth Select */
+static struct vga_regset iga1_k8m800_fifo_depth_select[] = {
+	{ VGA_SEQ_I, 0x17, 0, 7 }
+};
+
+/* CLE266 and KM400 IGA2 FIFO Depth_Select */
+static struct vga_regset iga2_cle266_fifo_depth_select[] = {
+	{ VGA_CRT_IC, 0x68, 4, 7 }
+};
+
+/* K8M800 or later IGA2 FIFO Depth_Select */
+static struct vga_regset iga2_k8m800_fifo_depth_select[] = {
+	{ VGA_CRT_IC, 0x68, 4, 7 },
+	{ VGA_CRT_IC, 0x94, 7, 7 },
+	{ VGA_CRT_IC, 0x95, 7, 7 }
+};
+
+/* CLE266 and KM400 IGA1 FIFO Threshold Select */
+static struct vga_regset iga1_cle266_fifo_threshold_select[] = {
+	{ VGA_SEQ_I, 0x16, 0, 5 }
+};
+
+/*  K8M800 or later IGA1 FIFO Threshold Select */
+static struct vga_regset iga1_k8m800_fifo_threshold_select[] = {
+	{ VGA_SEQ_I, 0x16, 0, 5 },
+	{ VGA_SEQ_I, 0x16, 7, 7 }
+};
+
+/* CLE266 and KM400 IGA2 FIFO Threshold Select */
+static struct vga_regset iga2_cle266_fifo_threshold_select[] = {
+	{ VGA_CRT_IC, 0x68, 0, 3 }
+};
+
+/* K8M800 or later IGA2 FIFO Threshold Select */
+static struct vga_regset iga2_k8m800_fifo_threshold_select[] = {
+	{ VGA_CRT_IC, 0x68, 0, 3 },
+	{ VGA_CRT_IC, 0x95, 4, 6 }
+};
+
+/* CLE266 and KM400 IGA1 FIFO High Threshold Select */
+static struct vga_regset iga1_cle266_fifo_high_threshold_select[] = {
+	{ VGA_SEQ_I, 0x18, 0, 5 }
+};
+
+/* K8M800 or later IGA1 FIFO High Threshold Select */
+static struct vga_regset iga1_k8m800_fifo_high_threshold_select[] = {
+	{ VGA_SEQ_I, 0x18, 0, 5 },
+	{ VGA_SEQ_I, 0x18, 7, 7 }
+};
+
+/* IGA2 FIFO High Threshold Select */
+static struct vga_regset iga2_fifo_high_threshold_select[] = {
+	{ VGA_CRT_IC, 0x92, 0, 3 },
+	{ VGA_CRT_IC, 0x95, 0, 2 }
+};
+
+/* CLE266 and KM400 IGA1 FIFO Display Queue Expire */
+static struct vga_regset iga1_cle266_display_queue_expire_num[] = {
+	{ VGA_SEQ_I, 0x22, 0, 4 }
+};
+
+/* K8M800 and later IGA1 FIFO Display Queue Expire */
+static struct vga_regset iga1_k8m800_display_queue_expire_num[] = {
+	{ VGA_SEQ_I, 0x22, 0, 4 }
+};
+
+/* IGA2 FIFO display queue expire */
+static struct vga_regset iga2_display_queue_expire_num[] = {
+	{ VGA_CRT_IC, 0x94, 0, 6 }
+};
+
+/***********************************************/
+/************* Offset register *****************/
+/***********************************************/
+
+/* IGA1 Offset Register */
+static struct vga_regset iga1_offset[] = {
+	{ VGA_CRT_IC, 0x13, 0, 7 },
+	{ VGA_CRT_IC, 0x35, 5, 7 }
+};
+
+/* IGA2 Offset Register */
+static struct vga_regset iga2_offset[] = {
+	{ VGA_CRT_IC, 0x66, 0, 7 },
+	{ VGA_CRT_IC, 0x67, 0, 1 },
+	{ VGA_CRT_IC, 0x71, 7, 7 }
+};
+
+/***********************************************/
+/*********** Fetch count register **************/
+/***********************************************/
+
+/* IGA1 Fetch Count Register */
+static struct vga_regset iga1_fetch_count[] = {
+	{ VGA_SEQ_I, 0x1C, 0, 7 },
+	{ VGA_SEQ_I, 0x1D, 0, 1 }
+};
+
+/* IGA2 Fetch Count Register */
+static struct vga_regset iga2_fetch_count[] = {
+	{ VGA_CRT_IC, 0x65, 0, 7 },
+	{ VGA_CRT_IC, 0x67, 2, 3 }
+};
+
+/************************************************/
+/*********** IGA Scaling Factor Registers *******/
+/************************************************/
+#define LCD_HOR_SCALE_FACTOR_FORMULA(x, y)	(((x - 1) * 4096) / (y - 1))
+#define LCD_VER_SCALE_FACTOR_FORMULA(x, y)	(((x - 1) * 2048) / (y - 1))
+
+static struct vga_regset lcd_hor_scaling[] = {
+	{ VGA_CRT_IC, 0x9F, 0, 1 },
+	{ VGA_CRT_IC, 0x77, 0, 7 },
+	{ VGA_CRT_IC, 0x79, 4, 5 }
+};
+
+static struct vga_regset lcd_ver_scaling[] = {
+	{ VGA_CRT_IC, 0x79, 3, 3 },
+	{ VGA_CRT_IC, 0x78, 0, 7 },
+	{ VGA_CRT_IC, 0x79, 6, 7 }
+};
+
+/***********************************************/
+/*********** CRTC timing register **************/
+/***********************************************/
+
+/***************************************************/
+/* Definition IGA1 Design Method of CRTC Registers */
+/***************************************************/
+#define IGA1_HOR_TOTAL_FORMULA(x)	(x / 8) - 5
+#define IGA1_HOR_ADDR_FORMULA(x)	(x / 8) - 1
+#define IGA1_HOR_BLANK_START_FORMULA(x)	(x / 8) - 1
+#define IGA1_HOR_BLANK_END_FORMULA(x)	(x / 8) - 1
+#define IGA1_HOR_SYNC_START_FORMULA(x)	(x / 8) - 1
+#define IGA1_HOR_SYNC_END_FORMULA(x)	(x / 8) - 1
+
+#define IGA1_VER_TOTAL_FORMULA(x)	(x - 2)
+#define IGA1_VER_ADDR_FORMULA(x)	(x - 1)
+#define IGA1_VER_BLANK_START_FORMULA(x)	(x - 1)
+#define IGA1_VER_BLANK_END_FORMULA(x)	(x - 1)
+#define IGA1_VER_SYNC_START_FORMULA(x)	(x - 1)
+#define IGA1_VER_SYNC_END_FORMULA(x)	(x - 1)
+
+/***************************************************/
+/* Definition IGA2 Design Method of CRTC Registers */
+/***************************************************/
+#define IGA2_HOR_TOTAL_FORMULA(x)	(x - 1)
+#define IGA2_HOR_ADDR_FORMULA(x)	(x - 1)
+#define IGA2_HOR_BLANK_START_FORMULA(x)	(x - 1)
+#define IGA2_HOR_BLANK_END_FORMULA(x)	(x - 1)
+#define IGA2_HOR_SYNC_START_FORMULA(x)	(x - 1)
+#define IGA2_HOR_SYNC_END_FORMULA(x)	(x - 1)
+
+#define IGA2_VER_TOTAL_FORMULA(x)	(x - 1)
+#define IGA2_VER_ADDR_FORMULA(x)	(x - 1)
+#define IGA2_VER_BLANK_START_FORMULA(x)	(x - 1)
+#define IGA2_VER_BLANK_END_FORMULA(x)	(x - 1)
+#define IGA2_VER_SYNC_START_FORMULA(x)	(x - 1)
+#define IGA2_VER_SYNC_END_FORMULA(x)	(x - 1)
+
+/****************************************************************/
+/* Definition IGA1 Design Method of CRTC Pixel timing Registers	*/
+/****************************************************************/
+#define IGA1_PIXELTIMING_HOR_TOTAL_FORMULA(x)		(x - 1)
+#define IGA1_PIXELTIMING_HOR_ADDR_FORMULA(x)		(x - 1)
+#define IGA1_PIXELTIMING_HOR_BLANK_START_FORMULA(x)	(x - 1)
+#define IGA1_PIXELTIMING_HOR_BLANK_END_FORMULA(x)	(x - 1)
+#define IGA1_PIXELTIMING_HOR_SYNC_START_FORMULA(x)	(x - 1)
+#define IGA1_PIXELTIMING_HOR_SYNC_END_FORMULA(x)	(x - 1)
+
+#define IGA1_PIXELTIMING_VER_TOTAL_FORMULA(x)		(x - 2)
+#define IGA1_PIXELTIMING_VER_ADDR_FORMULA(x)		(x - 1)
+#define IGA1_PIXELTIMING_VER_BLANK_START_FORMULA(x)	(x - 1)
+#define IGA1_PIXELTIMING_VER_BLANK_END_FORMULA(x)	(x - 1)
+#define IGA1_PIXELTIMING_VER_SYNC_START_FORMULA(x)	(x - 1)
+#define IGA1_PIXELTIMING_VER_SYNC_END_FORMULA(x)	(x - 1)
+
+#define IGA1_PIXELTIMING_HVSYNC_OFFSET_END_FORMULA(x, y)	\
+	((x / 2) - 1 - (x - y))
+
+/************************************************/
+/*      Define IGA1 Display Timing              */
+/************************************************/
+
+/* IGA1 Horizontal Total */
+static struct vga_regset iga1_hor_total[] = {
+	{ VGA_CRT_IC, 0x00, 0, 7 },
+	{ VGA_CRT_IC, 0x36, 3, 3 }
+};
+
+/* IGA1 Horizontal Addressable Video */
+static struct vga_regset iga1_hor_addr[] = {
+	{ VGA_CRT_IC, 0x01, 0, 7 },
+	{ VGA_CRT_IC, 0x45, 1, 1 }
+};
+
+/* IGA1 Horizontal Blank Start */
+static struct vga_regset iga1_hor_blank_start[] = {
+	{ VGA_CRT_IC, 0x02, 0, 7 },
+	{ VGA_CRT_IC, 0x45, 2, 2 }
+};
+
+/* IGA1 Horizontal Blank End */
+static struct vga_regset iga1_hor_blank_end[] = {
+	{ VGA_CRT_IC, 0x03, 0, 4 },
+	{ VGA_CRT_IC, 0x05, 7, 7 },
+	{ VGA_CRT_IC, 0x33, 5, 5 }
+};
+
+/* IGA1 Horizontal Sync Start */
+static struct vga_regset iga1_hor_sync_start[] = {
+	{ VGA_CRT_IC, 0x04, 0, 7 },
+	{ VGA_CRT_IC, 0x33, 4, 4 }
+};
+
+/* IGA1 Horizontal Sync End */
+static struct vga_regset iga1_hor_sync_end[] = {
+	{ VGA_CRT_IC, 0x05, 0, 4 }
+};
+
+/* IGA1 Vertical Total */
+static struct vga_regset iga1_ver_total[] = {
+	{ VGA_CRT_IC, 0x06, 0, 7 },
+	{ VGA_CRT_IC, 0x07, 0, 0 },
+	{ VGA_CRT_IC, 0x07, 5, 5 },
+	{ VGA_CRT_IC, 0x35, 0, 0 }
+};
+
+/* IGA1 Vertical Addressable Video */
+static struct vga_regset iga1_ver_addr[] = {
+	{ VGA_CRT_IC, 0x12, 0, 7 },
+	{ VGA_CRT_IC, 0x07, 1, 1 },
+	{ VGA_CRT_IC, 0x07, 6, 6 },
+	{ VGA_CRT_IC, 0x35, 2, 2 }
+};
+
+/* IGA1 Vertical Blank Start */
+static struct vga_regset iga1_ver_blank_start[] = {
+	{ VGA_CRT_IC, 0x15, 0, 7 },
+	{ VGA_CRT_IC, 0x07, 3, 3 },
+	{ VGA_CRT_IC, 0x09, 5, 5 },
+	{ VGA_CRT_IC, 0x35, 3, 3 }
+};
+
+/* IGA1 Vertical Blank End */
+static struct vga_regset iga1_ver_blank_end[] = {
+	{ VGA_CRT_IC, 0x16, 0, 7 }
+};
+
+/* IGA1 Vertical Sync Start */
+static struct vga_regset iga1_ver_sync_start[] = {
+	{ VGA_CRT_IC, 0x10, 0, 7 },
+	{ VGA_CRT_IC, 0x07, 2, 2 },
+	{ VGA_CRT_IC, 0x07, 7, 7 },
+	{ VGA_CRT_IC, 0x35, 1, 1 }
+};
+
+/* IGA1 Vertical Sync End */
+static struct vga_regset iga1_ver_sync_end[] = {
+	{ VGA_CRT_IC, 0x11, 0, 3 }
+};
+
+/************************************************/
+/*      Define IGA2 Display Timing              */
+/************************************************/
+
+/* IGA2 Horizontal Total */
+static struct vga_regset iga2_hor_total[] = {
+	{ VGA_CRT_IC, 0x50, 0, 7 },
+	{ VGA_CRT_IC, 0x55, 0, 3 }
+};
+
+/* IGA2 Horizontal Addressable Video */
+static struct vga_regset iga2_hor_addr[] = {
+	{ VGA_CRT_IC, 0x51, 0, 7 },
+	{ VGA_CRT_IC, 0x55, 4, 6 },
+	{ VGA_CRT_IC, 0x55, 7, 7 }
+};
+
+/* IGA2 Horizontal Blank Start */
+static struct vga_regset iga2_hor_blank_start[] = {
+	{ VGA_CRT_IC, 0x52, 0, 7 },
+	{ VGA_CRT_IC, 0x54, 0, 2 },
+	{ VGA_CRT_IC, 0x6B, 0, 0 }
+};
+
+/* IGA2 Horizontal Blank End */
+static struct vga_regset iga2_hor_blank_end[] = {
+	{ VGA_CRT_IC, 0x53, 0, 7 },
+	{ VGA_CRT_IC, 0x54, 3, 5 },
+	{ VGA_CRT_IC, 0x5D, 6, 6 }
+};
+
+/* IGA2 Horizontal Sync Start */
+static struct vga_regset iga2_hor_sync_start[] = {
+	{ VGA_CRT_IC, 0x56, 0, 7 },
+	{ VGA_CRT_IC, 0x54, 6, 7 },
+	{ VGA_CRT_IC, 0x5C, 7, 7 },
+	{ VGA_CRT_IC, 0x5D, 7, 7 }
+};
+
+/* IGA2 Horizontal Sync End */
+static struct vga_regset iga2_hor_sync_end[] = {
+	{ VGA_CRT_IC, 0x57, 0, 7 },
+	{ VGA_CRT_IC, 0x5C, 6, 6 }
+};
+
+/* IGA2 Vertical Total */
+static struct vga_regset iga2_ver_total[] = {
+	{ VGA_CRT_IC, 0x58, 0, 7 },
+	{ VGA_CRT_IC, 0x5D, 0, 2 }
+};
+
+/* IGA2 Vertical Addressable Video */
+static struct vga_regset iga2_ver_addr[] = {
+	{ VGA_CRT_IC, 0x59, 0, 7 },
+	{ VGA_CRT_IC, 0x5D, 3, 5 }
+};
+
+/* IGA2 Vertical Blank Start */
+static struct vga_regset iga2_ver_blank_start[] = {
+	{ VGA_CRT_IC, 0x5A, 0, 7 },
+	{ VGA_CRT_IC, 0x5C, 0, 2 }
+};
+
+/* IGA2 Vertical Blank End */
+static struct vga_regset iga2_ver_blank_end[] = {
+	{ VGA_CRT_IC, 0x5B, 0, 7 },
+	{ VGA_CRT_IC, 0x5C, 3, 5 }
+};
+
+/* IGA2 Vertical Sync Start */
+static struct vga_regset iga2_ver_sync_start[] = {
+	{ VGA_CRT_IC, 0x5E, 0, 7 },
+	{ VGA_CRT_IC, 0x5F, 5, 7 }
+};
+
+/* IGA2 Vertical Sync End */
+static struct vga_regset iga2_ver_sync_end[] = {
+	{ VGA_CRT_IC, 0x5F, 0, 4 }
+};
+
+/* IGA1 pixel timing Registers */
+#define	IGA1_PIX_H_TOTAL_REG		0x8400		/* [15:0]  */
+#define	IGA1_PIX_H_ADDR_REG		0x8400		/* [31:16] */
+#define	IGA1_PIX_H_BNK_ST_REG		0x8404		/* [15:0]  */
+#define	IGA1_PIX_H_BNK_END_REG		0x8404		/* [31:16] */
+#define	IGA1_PIX_H_SYNC_ST_REG		0x8408		/* [15:0]  */
+#define	IGA1_PIX_H_SYNC_END_REG		0x8408		/* [31:16] */
+#define	IGA1_PIX_V_TOTAL_REG		0x8424		/* [10:0]  */
+#define	IGA1_PIX_V_ADDR_REG		0x8424		/* [26:16] */
+#define	IGA1_PIX_V_BNK_ST_REG		0x8428		/* [10:0]  */
+#define	IGA1_PIX_V_BNK_END_REG		0x8428		/* [26:16] */
+#define	IGA1_PIX_V_SYNC_ST_REG		0x842C		/* [10:0]  */
+#define	IGA1_PIX_V_SYNC_END_REG		0x842C		/* [15:12] */
+#define	IGA1_PIX_HALF_LINE_REG		0x8434		/* [15:0]  */
+
+#define	IGA1_PIX_H_TOTAL_MASK		0x0000FFFF	/* [15:0]  */
+#define	IGA1_PIX_H_ADDR_MASK		0xFFFF0000	/* [31:16] */
+#define	IGA1_PIX_H_BNK_ST_MASK		0x0000FFFF	/* [15:0]  */
+#define	IGA1_PIX_H_BNK_END_MASK		0xFFFF0000	/* [31:16] */
+#define	IGA1_PIX_H_SYNC_ST_MASK		0x0000FFFF	/* [15:0]  */
+#define	IGA1_PIX_H_SYNC_END_MASK	0xFFFF0000	/* [31:16] */
+#define	IGA1_PIX_V_TOTAL_MASK		0x000007FF	/* [10:0]  */
+#define	IGA1_PIX_V_ADDR_MASK		0x07FF0000	/* [26:16] */
+#define	IGA1_PIX_V_BNK_ST_MASK		0x000007FF	/* [10:0]  */
+#define	IGA1_PIX_V_BNK_END_MASK		0x07FF0000	/* [26:16] */
+#define	IGA1_PIX_V_SYNC_ST_MASK		0x000007FF	/* [10:0]  */
+#define	IGA1_PIX_V_SYNC_END_MASK	0x0000F000	/* [15:12] */
+#define	IGA1_PIX_HALF_LINE_MASK		0x0000FFFF	/* [15:0]  */
+
+#endif
--
2.35.1


  parent reply	other threads:[~2022-06-24 20:32 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace
2022-06-24 20:26 ` [PATCH 01/28] drm/via: Add via_3d_reg.h Kevin Brace
2022-06-24 20:26 ` [PATCH 02/28] drm/via: Add via_crtc_hw.h Kevin Brace
2022-06-24 20:26 ` Kevin Brace [this message]
2022-06-24 20:26 ` [PATCH 04/28] drm/via: Add via_drv.h Kevin Brace
2022-06-25  6:51   ` Sam Ravnborg
2022-06-28 14:33     ` Jani Nikula
2022-06-28 14:32   ` Jani Nikula
2022-06-24 20:26 ` [PATCH 05/28] drm/via: Add via_regs.h Kevin Brace
2022-06-24 20:26 ` [PATCH 06/28] drm/via: Add via_crtc.c Kevin Brace
2022-06-24 20:26 ` [PATCH 07/28] drm/via: Add via_crtc_hw.c Kevin Brace
2022-06-24 20:26 ` [PATCH 08/28] drm/via: Add via_cursor.c Kevin Brace
2022-06-25  6:59   ` Sam Ravnborg
2022-06-24 20:26 ` [PATCH 09/28] drm/via: Add via_dac.c Kevin Brace
2022-06-24 20:26 ` [PATCH 10/28] drm/via: Add via_display.c Kevin Brace
2022-06-24 20:26 ` [PATCH 11/28] drm/via: Add via_drv.c Kevin Brace
2022-06-25  7:15   ` Sam Ravnborg
2022-06-24 20:26 ` [PATCH 12/28] drm/via: Add via_encoder.c Kevin Brace
2022-06-24 20:26 ` [PATCH 13/28] drm/via: Add via_hdmi.c Kevin Brace
2022-06-24 20:26 ` [PATCH 14/28] drm/via: Add via_i2c.c Kevin Brace
2022-06-24 20:26 ` [PATCH 15/28] drm/via: Add via_init.c Kevin Brace
2022-06-24 20:26 ` [PATCH 16/28] drm/via: Add via_ioctl.c Kevin Brace
2022-06-24 20:26 ` [PATCH 17/28] drm/via: Add via_lvds.c Kevin Brace
2022-06-24 20:26 ` [PATCH 18/28] drm/via: Add via_object.c Kevin Brace
2022-06-24 20:26 ` [PATCH 19/28] drm/via: Add via_pll.c Kevin Brace
2022-06-24 21:15 ` [PATCH 00/28] OpenChrome DRM for Linux 5.20 Sam Ravnborg
2022-06-24 23:14   ` Kevin Brace
2022-06-27  7:37 ` Thomas Zimmermann
2022-06-27 21:32   ` Sam Ravnborg
2022-06-28 12:21     ` Thomas Zimmermann
2022-06-30  8:07       ` Javier Martinez Canillas
2022-06-30  8:19         ` Thomas Zimmermann
2022-06-30  8:27           ` Javier Martinez Canillas
2022-06-30  8:33           ` Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220624202633.3978-4-kevinbrace@gmx.com \
    --to=kevinbrace@gmx.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kevinbrace@bracecomputerlab.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.