All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-serial@vger.kernel.org,
	Greg KH <gregkh@linuxfoundation.org>,
	Jiri Slaby <jirislaby@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v3 1/6] serial: msm: Convert container_of UART_TO_MSM to static inline
Date: Fri, 24 Jun 2022 23:54:19 +0300	[thread overview]
Message-ID: <20220624205424.12686-2-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20220624205424.12686-1-ilpo.jarvinen@linux.intel.com>

Create static inline instead of define as it provides type safety and
is safer wrt. macros expansion.

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/msm_serial.c | 49 +++++++++++++++++----------------
 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e676ec761f18..15cab9c4b295 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -181,7 +181,10 @@ struct msm_port {
 	struct msm_dma		rx_dma;
 };
 
-#define UART_TO_MSM(uart_port)	container_of(uart_port, struct msm_port, uart)
+static inline struct msm_port *to_msm_port(struct uart_port *up)
+{
+	return container_of(up, struct msm_port, uart);
+}
 
 static
 void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
@@ -221,7 +224,7 @@ static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
 
 static void msm_serial_set_mnd_regs(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	/*
 	 * These registers don't exist so we change the clk input rate
@@ -404,7 +407,7 @@ static inline void msm_wait_for_xmitr(struct uart_port *port)
 
 static void msm_stop_tx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	msm_port->imr &= ~UART_IMR_TXLEV;
 	msm_write(port, msm_port->imr, UART_IMR);
@@ -412,7 +415,7 @@ static void msm_stop_tx(struct uart_port *port)
 
 static void msm_start_tx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->tx_dma;
 
 	/* Already started in DMA mode */
@@ -690,7 +693,7 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
 
 static void msm_stop_rx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->rx_dma;
 
 	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
@@ -702,7 +705,7 @@ static void msm_stop_rx(struct uart_port *port)
 
 static void msm_enable_ms(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	msm_port->imr |= UART_IMR_DELTA_CTS;
 	msm_write(port, msm_port->imr, UART_IMR);
@@ -714,7 +717,7 @@ static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
 	struct tty_port *tport = &port->state->port;
 	unsigned int sr;
 	int count = 0;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
 		port->icount.overrun++;
@@ -837,7 +840,7 @@ static void msm_handle_rx(struct uart_port *port)
 static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
 {
 	struct circ_buf *xmit = &port->state->xmit;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int num_chars;
 	unsigned int tf_pointer = 0;
 	void __iomem *tf;
@@ -883,7 +886,7 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
 
 static void msm_handle_tx(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct circ_buf *xmit = &msm_port->uart.state->xmit;
 	struct msm_dma *dma = &msm_port->tx_dma;
 	unsigned int pio_count, dma_count, dma_min;
@@ -947,7 +950,7 @@ static void msm_handle_delta_cts(struct uart_port *port)
 static irqreturn_t msm_uart_irq(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->rx_dma;
 	unsigned long flags;
 	unsigned int misr;
@@ -1002,7 +1005,7 @@ static unsigned int msm_get_mctrl(struct uart_port *port)
 
 static void msm_reset(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int mr;
 
 	/* reset everything */
@@ -1055,7 +1058,7 @@ static const struct msm_baud_map *
 msm_find_best_baud(struct uart_port *port, unsigned int baud,
 		   unsigned long *rate)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int divisor, result;
 	unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX;
 	const struct msm_baud_map *entry, *end, *best;
@@ -1124,7 +1127,7 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
 			     unsigned long *saved_flags)
 {
 	unsigned int rxstale, watermark, mask;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	const struct msm_baud_map *entry;
 	unsigned long flags, rate;
 
@@ -1185,7 +1188,7 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
 
 static void msm_init_clock(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	clk_prepare_enable(msm_port->clk);
 	clk_prepare_enable(msm_port->pclk);
@@ -1194,7 +1197,7 @@ static void msm_init_clock(struct uart_port *port)
 
 static int msm_startup(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int data, rfr_level, mask;
 	int ret;
 
@@ -1246,7 +1249,7 @@ static int msm_startup(struct uart_port *port)
 
 static void msm_shutdown(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	msm_port->imr = 0;
 	msm_write(port, 0, UART_IMR); /* disable interrupts */
@@ -1262,7 +1265,7 @@ static void msm_shutdown(struct uart_port *port)
 static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	struct msm_dma *dma = &msm_port->rx_dma;
 	unsigned long flags;
 	unsigned int baud, mr;
@@ -1416,7 +1419,7 @@ static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
 static void msm_power(struct uart_port *port, unsigned int state,
 		      unsigned int oldstate)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	switch (state) {
 	case 0:
@@ -1435,7 +1438,7 @@ static void msm_power(struct uart_port *port, unsigned int state,
 #ifdef CONFIG_CONSOLE_POLL
 static int msm_poll_get_char_single(struct uart_port *port)
 {
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 	unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
 
 	if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
@@ -1489,7 +1492,7 @@ static int msm_poll_get_char(struct uart_port *port)
 {
 	u32 imr;
 	int c;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	/* Disable all interrupts */
 	imr = msm_read(port, UART_IMR);
@@ -1509,7 +1512,7 @@ static int msm_poll_get_char(struct uart_port *port)
 static void msm_poll_put_char(struct uart_port *port, unsigned char c)
 {
 	u32 imr;
-	struct msm_port *msm_port = UART_TO_MSM(port);
+	struct msm_port *msm_port = to_msm_port(port);
 
 	/* Disable all interrupts */
 	imr = msm_read(port, UART_IMR);
@@ -1677,7 +1680,7 @@ static void msm_console_write(struct console *co, const char *s,
 	BUG_ON(co->index < 0 || co->index >= UART_NR);
 
 	port = msm_get_port_from_line(co->index);
-	msm_port = UART_TO_MSM(port);
+	msm_port = to_msm_port(port);
 
 	__msm_console_write(port, s, count, msm_port->is_uartdm);
 }
@@ -1808,7 +1811,7 @@ static int msm_serial_probe(struct platform_device *pdev)
 
 	port = msm_get_port_from_line(line);
 	port->dev = &pdev->dev;
-	msm_port = UART_TO_MSM(port);
+	msm_port = to_msm_port(port);
 
 	id = of_match_device(msm_uartdm_table, &pdev->dev);
 	if (id)
-- 
2.30.2


  reply	other threads:[~2022-06-24 20:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-24 20:54 [PATCH v3 0/6] serial: A few cleanups Ilpo Järvinen
2022-06-24 20:54 ` Ilpo Järvinen [this message]
2022-06-24 20:54 ` [PATCH v3 2/6] serial: msm: Rename UART_* defines to MSM_UART_* Ilpo Järvinen
2022-06-24 20:54 ` [PATCH v3 3/6] serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA Ilpo Järvinen
2022-06-24 20:54 ` [PATCH v3 4/6] serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPED Ilpo Järvinen
2022-06-24 20:54 ` [PATCH v3 5/6] serial: Convert SERIAL_XMIT_SIZE to UART_XMIT_SIZE Ilpo Järvinen
2022-06-24 20:54   ` Ilpo Järvinen
2022-06-24 20:54   ` Ilpo Järvinen
2022-06-27  6:47   ` Jiri Slaby
2022-06-27  6:47     ` Jiri Slaby
2022-06-27  6:47     ` Jiri Slaby
2022-06-24 20:54 ` [PATCH v3 6/6] serial: Consolidate BOTH_EMPTY use Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220624205424.12686-2-ilpo.jarvinen@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=agross@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.