All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff LaBundy <jeff@labundy.com>
To: dmitry.torokhov@gmail.com, robh+dt@kernel.org
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	Jeff LaBundy <jeff@labundy.com>
Subject: [PATCH v2 3/9] Input: iqs7222 - protect volatile registers
Date: Sun, 26 Jun 2022 02:24:06 -0500	[thread overview]
Message-ID: <20220626072412.475211-4-jeff@labundy.com> (raw)
In-Reply-To: <20220626072412.475211-1-jeff@labundy.com>

Select variants of silicon silently mirror part of the event mask
register to the system setup register (0xD0), and vice versa. For
the following sequence:

1. Read registers 0xD0 onward and store their contents.
2. Modify the contents, including event mask fields.
3. Write registers 0xD0 onward with the modified contents.
4. Write register 0xD0 on its own again later, using the contents
   from step 1 to populate any reserved fields.

...the event mask register (e.g. address 0xDA) has been corrupted
by writing register 0xD0 with contents that were made stale after
step 3.

To solve this problem, read register 0xD0 once more between steps
3 and 4. When register 0xD0 is written during step 4, the portion
which is mirrored to the event mask register already matches what
was written in step 3.

Fixes: e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v2:
 - None

 drivers/input/misc/iqs7222.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c
index 57616a7ebeae..c46d3c8f0230 100644
--- a/drivers/input/misc/iqs7222.c
+++ b/drivers/input/misc/iqs7222.c
@@ -1274,9 +1274,22 @@ static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222)
 	struct i2c_client *client = iqs7222->client;
 	ktime_t ati_timeout;
 	u16 sys_status = 0;
-	u16 sys_setup = iqs7222->sys_setup[0] & ~IQS7222_SYS_SETUP_ACK_RESET;
+	u16 sys_setup;
 	int error, i;
 
+	/*
+	 * The reserved fields of the system setup register may have changed
+	 * as a result of other registers having been written. As such, read
+	 * the register's latest value to avoid unexpected behavior when the
+	 * register is written in the loop that follows.
+	 */
+	error = iqs7222_read_word(iqs7222, IQS7222_SYS_SETUP, &sys_setup);
+	if (error)
+		return error;
+
+	sys_setup &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK;
+	sys_setup &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK;
+
 	for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
 		/*
 		 * Trigger ATI from streaming and normal-power modes so that
@@ -2241,9 +2254,6 @@ static int iqs7222_parse_all(struct iqs7222_private *iqs7222)
 			return error;
 	}
 
-	sys_setup[0] &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK;
-	sys_setup[0] &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK;
-
 	sys_setup[0] |= IQS7222_SYS_SETUP_ACK_RESET;
 
 	return iqs7222_parse_props(iqs7222, NULL, 0, IQS7222_REG_GRP_SYS,
-- 
2.25.1


  parent reply	other threads:[~2022-06-26  7:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-26  7:24 [PATCH v2 0/9] Miscellaneous fixes for Azoteq IQS7222A/B/C Jeff LaBundy
2022-06-26  7:24 ` [PATCH v2 1/9] Input: iqs7222 - correct slider event disable logic Jeff LaBundy
2022-06-26  7:24 ` [PATCH v2 2/9] Input: iqs7222 - fortify slider event reporting Jeff LaBundy
2022-06-26  7:24 ` Jeff LaBundy [this message]
2022-06-26  7:24 ` [PATCH v2 4/9] Input: iqs7222 - acknowledge reset before writing registers Jeff LaBundy
2022-06-26  7:24 ` [PATCH v2 5/9] Input: iqs7222 - handle reset during ATI Jeff LaBundy
2022-06-26  7:24 ` [PATCH v2 6/9] Input: iqs7222 - remove support for RF filter Jeff LaBundy
2022-06-26  7:24 ` [PATCH v2 7/9] dt-bindings: input: iqs7222: Remove " Jeff LaBundy
2022-06-26  7:24 ` [PATCH v2 8/9] dt-bindings: input: iqs7222: Correct bottom speed step size Jeff LaBundy
2022-06-26  7:24 ` [PATCH v2 9/9] dt-bindings: input: iqs7222: Extend slider-mapped GPIO to IQS7222C Jeff LaBundy
2022-06-27 22:19 ` [PATCH v2 0/9] Miscellaneous fixes for Azoteq IQS7222A/B/C Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220626072412.475211-4-jeff@labundy.com \
    --to=jeff@labundy.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.