From: Eugene Shalygin <eugene.shalygin@gmail.com>
To: eugene.shalygin@gmail.com
Cc: Michael Carns <mike@carns.com>, Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] hwmon: (asus-ec-sensors) add support for Maximus XI Hero
Date: Tue, 28 Jun 2022 00:54:36 +0200 [thread overview]
Message-ID: <20220627225437.87462-1-eugene.shalygin@gmail.com> (raw)
From: Michael Carns <mike@carns.com>
Add definitions for ROG MAXIMUS XI HERO and ROG MAXIMUS XI HERO (WI-FI)
boards.
Signed-off-by: Michael Carns <mike@carns.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
---
Documentation/hwmon/asus_ec_sensors.rst | 2 ++
drivers/hwmon/asus-ec-sensors.c | 36 +++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
index 00d8c46ef9e0..1e40c123db77 100644
--- a/Documentation/hwmon/asus_ec_sensors.rst
+++ b/Documentation/hwmon/asus_ec_sensors.rst
@@ -13,6 +13,8 @@ Supported boards:
* ROG CROSSHAIR VIII FORMULA
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII IMPACT
+ * ROG MAXIMUS XI HERO
+ * ROG MAXIMUS XI HERO (WI-FI)
* ROG STRIX B550-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX X570-E GAMING
diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
index 19d3ca71b360..625c2baa35ec 100644
--- a/drivers/hwmon/asus-ec-sensors.c
+++ b/drivers/hwmon/asus-ec-sensors.c
@@ -141,6 +141,7 @@ enum board_family {
family_unknown,
family_amd_400_series,
family_amd_500_series,
+ family_intel_300_series,
family_intel_600_series
};
@@ -200,6 +201,26 @@ static const struct ec_sensor_info sensors_family_amd_500[] = {
EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
};
+static const struct ec_sensor_info sensors_family_intel_300[] = {
+ [ec_sensor_temp_chipset] =
+ EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
+ [ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
+ [ec_sensor_temp_mb] =
+ EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
+ [ec_sensor_temp_t_sensor] =
+ EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+ [ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
+ [ec_sensor_fan_cpu_opt] =
+ EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
+ [ec_sensor_fan_vrm_hs] = EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+ [ec_sensor_fan_water_flow] =
+ EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc),
+ [ec_sensor_temp_water_in] =
+ EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
+ [ec_sensor_temp_water_out] =
+ EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
+};
+
static const struct ec_sensor_info sensors_family_intel_600[] = {
[ec_sensor_temp_t_sensor] =
EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
@@ -281,6 +302,18 @@ static const struct ec_board_info board_info[] = {
.mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
.family = family_amd_500_series,
},
+ {
+ .board_names = {
+ "ROG MAXIMUS XI HERO",
+ "ROG MAXIMUS XI HERO (WI-FI)",
+ },
+ .sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
+ SENSOR_TEMP_T_SENSOR |
+ SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
+ SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW,
+ .mutex_path = ASUS_HW_ACCESS_MUTEX_ASMX,
+ .family = family_intel_300_series,
+ },
{
.board_names = {"ROG CROSSHAIR VIII IMPACT"},
.sensors = SENSOR_SET_TEMP_CHIPSET_CPU_MB |
@@ -814,6 +847,9 @@ static int __init asus_ec_probe(struct platform_device *pdev)
case family_amd_500_series:
ec_data->sensors_info = sensors_family_amd_500;
break;
+ case family_intel_300_series:
+ ec_data->sensors_info = sensors_family_intel_300;
+ break;
case family_intel_600_series:
ec_data->sensors_info = sensors_family_intel_600;
break;
--
2.35.1
next reply other threads:[~2022-06-27 22:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-27 22:54 Eugene Shalygin [this message]
2022-06-29 21:06 ` [PATCH] hwmon: (asus-ec-sensors) add support for Maximus XI Hero Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220627225437.87462-1-eugene.shalygin@gmail.com \
--to=eugene.shalygin@gmail.com \
--cc=corbet@lwn.net \
--cc=jdelvare@suse.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mike@carns.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.