[PATCH v2 4/4] spi: s3c64xx: add spi port configuration for Exynos Auto v9 SoC

[Chanho Park <chanho61.park@samsung.com>]

Add exynosautov9 spi port configuration. It supports up to 12 spis so
MAX_SPI_PORTS should be increased from 6 to 12.
It has DIV_4 as the default internal clock divider and an internal
loopback mode to run a loopback test.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
---
 drivers/spi/spi-s3c64xx.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 51a0e830441b..0c9e19889809 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -18,7 +18,7 @@
 
 #include <linux/platform_data/spi-s3c64xx.h>
 
-#define MAX_SPI_PORTS		6
+#define MAX_SPI_PORTS		12
 #define S3C64XX_SPI_QUIRK_POLL		(1 << 0)
 #define S3C64XX_SPI_QUIRK_CS_AUTO	(1 << 1)
 #define AUTOSUSPEND_TIMEOUT	2000
@@ -1451,6 +1451,19 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = {
 	.quirks		= S3C64XX_SPI_QUIRK_CS_AUTO,
 };
 
+static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = {
+	.fifo_lvl_mask	= { 0x1ff, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff, 0x7f,
+			    0x7f, 0x7f, 0x7f, 0x7f},
+	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
+	.clk_div	= 4,
+	.high_speed	= true,
+	.clk_from_cmu	= true,
+	.clk_ioclk	= true,
+	.has_loopback	= true,
+	.quirks		= S3C64XX_SPI_QUIRK_CS_AUTO,
+};
+
 static struct s3c64xx_spi_port_config fsd_spi_port_config = {
 	.fifo_lvl_mask	= { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f},
 	.rx_lvl_offset	= 15,
@@ -1492,6 +1505,9 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = {
 	{ .compatible = "samsung,exynos5433-spi",
 			.data = (void *)&exynos5433_spi_port_config,
 	},
+	{ .compatible = "samsung,exynosautov9-spi",
+			.data = (void *)&exynosautov9_spi_port_config,
+	},
 	{ .compatible = "tesla,fsd-spi",
 			.data = (void *)&fsd_spi_port_config,
 	},
-- 
2.36.1