From: "Martin Povišer" <povik+lin@cutebit.org> To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org> Cc: "Hector Martin" <marcan@marcan.st>, "Stephen Kitt" <steve@sk2.org>, "Charles Keepax" <ckeepax@opensource.cirrus.com>, "Dan Murphy" <dmurphy@ti.com>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, asahi@lists.linux.dev, "Martin Povišer" <povik+lin@cutebit.org> Subject: [PATCH 1/4] ASoC: tas2764: Add post reset delays Date: Thu, 30 Jun 2022 09:51:32 +0200 [thread overview] Message-ID: <20220630075135.2221-1-povik+lin@cutebit.org> (raw) Make sure there is at least 1 ms delay from reset to first command as is specified in the datasheet. This is a fix similar to commit 307f31452078 ("ASoC: tas2770: Insert post reset delay"). Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> --- sound/soc/codecs/tas2764.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c index 42f0c1e449ba..039bf1900880 100644 --- a/sound/soc/codecs/tas2764.c +++ b/sound/soc/codecs/tas2764.c @@ -42,10 +42,12 @@ static void tas2764_reset(struct tas2764_priv *tas2764) gpiod_set_value_cansleep(tas2764->reset_gpio, 0); msleep(20); gpiod_set_value_cansleep(tas2764->reset_gpio, 1); + usleep_range(1000, 2000); } snd_soc_component_write(tas2764->component, TAS2764_SW_RST, TAS2764_RST); + usleep_range(1000, 2000); } static int tas2764_set_bias_level(struct snd_soc_component *component, @@ -107,8 +109,10 @@ static int tas2764_codec_resume(struct snd_soc_component *component) struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component); int ret; - if (tas2764->sdz_gpio) + if (tas2764->sdz_gpio) { gpiod_set_value_cansleep(tas2764->sdz_gpio, 1); + usleep_range(1000, 2000); + } ret = snd_soc_component_update_bits(component, TAS2764_PWR_CTRL, TAS2764_PWR_CTRL_MASK, @@ -501,8 +505,10 @@ static int tas2764_codec_probe(struct snd_soc_component *component) tas2764->component = component; - if (tas2764->sdz_gpio) + if (tas2764->sdz_gpio) { gpiod_set_value_cansleep(tas2764->sdz_gpio, 1); + usleep_range(1000, 2000); + } tas2764_reset(tas2764); -- 2.33.0
WARNING: multiple messages have this Message-ID (diff)
From: "Martin Povišer" <povik+lin@cutebit.org> To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org, "Charles Keepax" <ckeepax@opensource.cirrus.com>, "Hector Martin" <marcan@marcan.st>, linux-kernel@vger.kernel.org, "Dan Murphy" <dmurphy@ti.com>, "Martin Povišer" <povik+lin@cutebit.org>, "Stephen Kitt" <steve@sk2.org>, asahi@lists.linux.dev Subject: [PATCH 1/4] ASoC: tas2764: Add post reset delays Date: Thu, 30 Jun 2022 09:51:32 +0200 [thread overview] Message-ID: <20220630075135.2221-1-povik+lin@cutebit.org> (raw) Make sure there is at least 1 ms delay from reset to first command as is specified in the datasheet. This is a fix similar to commit 307f31452078 ("ASoC: tas2770: Insert post reset delay"). Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> --- sound/soc/codecs/tas2764.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c index 42f0c1e449ba..039bf1900880 100644 --- a/sound/soc/codecs/tas2764.c +++ b/sound/soc/codecs/tas2764.c @@ -42,10 +42,12 @@ static void tas2764_reset(struct tas2764_priv *tas2764) gpiod_set_value_cansleep(tas2764->reset_gpio, 0); msleep(20); gpiod_set_value_cansleep(tas2764->reset_gpio, 1); + usleep_range(1000, 2000); } snd_soc_component_write(tas2764->component, TAS2764_SW_RST, TAS2764_RST); + usleep_range(1000, 2000); } static int tas2764_set_bias_level(struct snd_soc_component *component, @@ -107,8 +109,10 @@ static int tas2764_codec_resume(struct snd_soc_component *component) struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component); int ret; - if (tas2764->sdz_gpio) + if (tas2764->sdz_gpio) { gpiod_set_value_cansleep(tas2764->sdz_gpio, 1); + usleep_range(1000, 2000); + } ret = snd_soc_component_update_bits(component, TAS2764_PWR_CTRL, TAS2764_PWR_CTRL_MASK, @@ -501,8 +505,10 @@ static int tas2764_codec_probe(struct snd_soc_component *component) tas2764->component = component; - if (tas2764->sdz_gpio) + if (tas2764->sdz_gpio) { gpiod_set_value_cansleep(tas2764->sdz_gpio, 1); + usleep_range(1000, 2000); + } tas2764_reset(tas2764); -- 2.33.0
next reply other threads:[~2022-06-30 8:01 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-30 7:51 Martin Povišer [this message] 2022-06-30 7:51 ` [PATCH 1/4] ASoC: tas2764: Add post reset delays Martin Povišer 2022-06-30 7:51 ` [PATCH 2/4] ASoC: tas2764: Fix and extend FSYNC polarity handling Martin Povišer 2022-06-30 7:51 ` Martin Povišer 2022-06-30 7:51 ` [PATCH 3/4] ASoC: tas2764: Correct playback volume range Martin Povišer 2022-06-30 7:51 ` Martin Povišer 2022-06-30 7:51 ` [PATCH 4/4] ASoC: tas2764: Fix amp gain register offset & default Martin Povišer 2022-06-30 7:51 ` Martin Povišer 2022-06-30 12:48 ` [PATCH 1/4] ASoC: tas2764: Add post reset delays Mark Brown 2022-06-30 12:48 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220630075135.2221-1-povik+lin@cutebit.org \ --to=povik+lin@cutebit.org \ --cc=alsa-devel@alsa-project.org \ --cc=asahi@lists.linux.dev \ --cc=broonie@kernel.org \ --cc=ckeepax@opensource.cirrus.com \ --cc=dmurphy@ti.com \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=marcan@marcan.st \ --cc=steve@sk2.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.