From: Vignesh Raghavendra <vigneshr@ti.com> To: Linus Walleij <linus.walleij@linaro.org>, Bartosz Golaszewski <brgl@bgdev.pl>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Vignesh Raghavendra <vigneshr@ti.com>, Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org> Subject: [RESEND][PATCH v5] dt-bindings: gpio: Convert TI TPIC2810 GPIO Controller bindings to YAML Date: Fri, 8 Jul 2022 21:28:19 +0530 [thread overview] Message-ID: <20220708155819.3096903-1-vigneshr@ti.com> (raw) From: Aparna M <a-m1@ti.com> Convert gpio-tpic2810 bindings to yaml format and remove outdated bindings in .txt format. Signed-off-by: Aparna M <a-m1@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- v5 -> Resend v5: Collect R-bys v4 -> v5: Fix indentation issues v3 -> v4: Add gpio-line-names property v2 -> v3: Remove redundant descriptions and make minor change in example v1 -> v2: Fix identation issues and update commit message .../bindings/gpio/gpio-tpic2810.txt | 16 ------ .../bindings/gpio/gpio-tpic2810.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 16 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt deleted file mode 100644 index 1afc2de7a537..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt +++ /dev/null @@ -1,16 +0,0 @@ -TPIC2810 GPIO controller bindings - -Required properties: - - compatible : Should be "ti,tpic2810". - - reg : The I2C address of the device - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Example: - - gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file mode 100644 index 000000000000..cb8a5c376e1e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPIC2810 GPIO controller bindings + +maintainers: + - Aswath Govindraju <a-govindraju@ti.com> + +properties: + compatible: + enum: + - ti,tpic2810 + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-line-names: + minItems: 1 + maxItems: 32 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED A", "LED B", "LED C"; + }; + }; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com> To: Linus Walleij <linus.walleij@linaro.org>, Bartosz Golaszewski <brgl@bgdev.pl>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Vignesh Raghavendra <vigneshr@ti.com>, Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org> Subject: [RESEND][PATCH v5] dt-bindings: gpio: Convert TI TPIC2810 GPIO Controller bindings to YAML Date: Fri, 8 Jul 2022 21:28:19 +0530 [thread overview] Message-ID: <20220708155819.3096903-1-vigneshr@ti.com> (raw) From: Aparna M <a-m1@ti.com> Convert gpio-tpic2810 bindings to yaml format and remove outdated bindings in .txt format. Signed-off-by: Aparna M <a-m1@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- v5 -> Resend v5: Collect R-bys v4 -> v5: Fix indentation issues v3 -> v4: Add gpio-line-names property v2 -> v3: Remove redundant descriptions and make minor change in example v1 -> v2: Fix identation issues and update commit message .../bindings/gpio/gpio-tpic2810.txt | 16 ------ .../bindings/gpio/gpio-tpic2810.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 16 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt deleted file mode 100644 index 1afc2de7a537..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt +++ /dev/null @@ -1,16 +0,0 @@ -TPIC2810 GPIO controller bindings - -Required properties: - - compatible : Should be "ti,tpic2810". - - reg : The I2C address of the device - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Example: - - gpio@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml new file mode 100644 index 000000000000..cb8a5c376e1e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPIC2810 GPIO controller bindings + +maintainers: + - Aswath Govindraju <a-govindraju@ti.com> + +properties: + compatible: + enum: + - ti,tpic2810 + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-line-names: + minItems: 1 + maxItems: 32 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED A", "LED B", "LED C"; + }; + }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-07-08 15:58 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-08 15:58 Vignesh Raghavendra [this message] 2022-07-08 15:58 ` [RESEND][PATCH v5] dt-bindings: gpio: Convert TI TPIC2810 GPIO Controller bindings to YAML Vignesh Raghavendra 2022-07-11 19:18 ` Bartosz Golaszewski 2022-07-11 19:18 ` Bartosz Golaszewski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220708155819.3096903-1-vigneshr@ti.com \ --to=vigneshr@ti.com \ --cc=brgl@bgdev.pl \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.