All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <mripard@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Karol Herbst <kherbst@redhat.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	Daniel Vetter <daniel@ffwll.ch>, Lyude Paul <lyude@redhat.com>,
	Samuel Holland <samuel@sholland.org>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Emma Anholt <emma@anholt.net>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	David Airlie <airlied@linux.ie>, Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org,
	Noralf Trønnes <noralf@tronnes.org>,
	Dom Cobley <dom@raspberrypi.com>,
	intel-gfx@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-sunxi@lists.linux.dev,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>,
	linux-kernel@vger.kernel.org, Maxime Ripard <maxime@cerno.tech>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v8 00/24] drm: Analog TV Improvements
Date: Thu, 10 Nov 2022 12:07:12 +0100	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech> (raw)

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (21):
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |   2 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 229 +++++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  90 ++++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 145 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 209 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2274 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Chen-Yu Tsai <wens@csie.org>,  Maxime Ripard <mripard@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Karol Herbst <kherbst@redhat.com>,
	 Jani Nikula <jani.nikula@linux.intel.com>,
	Daniel Vetter <daniel@ffwll.ch>, Lyude Paul <lyude@redhat.com>,
	Samuel Holland <samuel@sholland.org>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	 Thomas Zimmermann <tzimmermann@suse.de>,
	Emma Anholt <emma@anholt.net>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	 Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	David Airlie <airlied@linux.ie>, Ben Skeggs <bskeggs@redhat.com>
Cc: Dom Cobley <dom@raspberrypi.com>,
	nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	linux-sunxi@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org
Subject: [Nouveau] [PATCH v8 00/24] drm: Analog TV Improvements
Date: Thu, 10 Nov 2022 12:07:12 +0100	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech> (raw)

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (21):
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |   2 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 229 +++++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  90 ++++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 145 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 209 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2274 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Chen-Yu Tsai <wens@csie.org>,  Maxime Ripard <mripard@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Karol Herbst <kherbst@redhat.com>,
	 Jani Nikula <jani.nikula@linux.intel.com>,
	Daniel Vetter <daniel@ffwll.ch>, Lyude Paul <lyude@redhat.com>,
	Samuel Holland <samuel@sholland.org>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	 Thomas Zimmermann <tzimmermann@suse.de>,
	Emma Anholt <emma@anholt.net>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	 Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	David Airlie <airlied@linux.ie>, Ben Skeggs <bskeggs@redhat.com>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	linux-sunxi@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 00/24] drm: Analog TV Improvements
Date: Thu, 10 Nov 2022 12:07:12 +0100	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech> (raw)

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (21):
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |   2 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 229 +++++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  90 ++++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 145 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 209 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2274 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Chen-Yu Tsai <wens@csie.org>,  Maxime Ripard <mripard@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Karol Herbst <kherbst@redhat.com>,
	 Jani Nikula <jani.nikula@linux.intel.com>,
	Daniel Vetter <daniel@ffwll.ch>, Lyude Paul <lyude@redhat.com>,
	Samuel Holland <samuel@sholland.org>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	 Thomas Zimmermann <tzimmermann@suse.de>,
	Emma Anholt <emma@anholt.net>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	 Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	David Airlie <airlied@linux.ie>, Ben Skeggs <bskeggs@redhat.com>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Noralf Trønnes <noralf@tronnes.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	linux-sunxi@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org
Subject: [Intel-gfx] [PATCH v8 00/24] drm: Analog TV Improvements
Date: Thu, 10 Nov 2022 12:07:12 +0100	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech> (raw)

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (21):
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |   2 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 229 +++++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  90 ++++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 145 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 209 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2274 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Chen-Yu Tsai <wens@csie.org>, Maxime Ripard <mripard@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Karol Herbst <kherbst@redhat.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	Daniel Vetter <daniel@ffwll.ch>, Lyude Paul <lyude@redhat.com>,
	Samuel Holland <samuel@sholland.org>,
	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Emma Anholt <emma@anholt.net>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
	David Airlie <airlied@linux.ie>, Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org,
	Noralf Trønnes <noralf@tronnes.org>,
	Dom Cobley <dom@raspberrypi.com>,
	intel-gfx@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-sunxi@lists.linux.dev,
	Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>,
	linux-kernel@vger.kernel.org, Maxime Ripard <maxime@cerno.tech>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v8 00/24] drm: Analog TV Improvements
Date: Thu, 10 Nov 2022 12:07:12 +0100	[thread overview]
Message-ID: <20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech> (raw)

Hi,

Here's a series aiming at improving the command line named modes support,
and more importantly how we deal with all the analog TV variants.

The named modes support were initially introduced to allow to specify the
analog TV mode to be used.

However, this was causing multiple issues:

  * The mode name parsed on the command line was passed directly to the
    driver, which had to figure out which mode it was suppose to match;

  * Figuring that out wasn't really easy, since the video= argument or what
    the userspace might not even have a name in the first place, but
    instead could have passed a mode with the same timings;

  * The fallback to matching on the timings was mostly working as long as
    we were supporting one 525 lines (most likely NSTC) and one 625 lines
    (PAL), but couldn't differentiate between two modes with the same
    timings (NTSC vs PAL-M vs NSTC-J for example);

  * There was also some overlap with the tv mode property registered by
    drm_mode_create_tv_properties(), but named modes weren't interacting
    with that property at all.

  * Even though that property was generic, its possible values were
    specific to each drivers, which made some generic support difficult.

Thus, I chose to tackle in multiple steps:

  * A new TV mode property was introduced, with generic values, each driver
    reporting through a bitmask what standard it supports to the userspace;

  * This option was added to the command line parsing code to be able to
    specify it on the kernel command line, and new atomic_check and reset
    helpers were created to integrate properly into atomic KMS;

  * The named mode parsing code is now creating a proper display mode for
    the given named mode, and the TV standard will thus be part of the
    connector state;

  * Two drivers were converted and tested for now (vc4 and sun4i), with
    some backward compatibility code to translate the old TV mode to the
    new TV mode;

Unit tests were created along the way.

One can switch from NTSC to PAL now using (on vc4)

modetest -M vc4  -s 53:720x480i -w 53:'TV mode':1 # NTSC
modetest -M vc4  -s 53:720x576i -w 53:'TV mode':4 # PAL

Let me know what you think,
Maxime

To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Emma Anholt <emma@anholt.net>
To: Jani Nikula <jani.nikula@linux.intel.com>
To: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ben Skeggs <bskeggs@redhat.com>
To: Karol Herbst <kherbst@redhat.com>
To: Lyude Paul <lyude@redhat.com>
To: Chen-Yu Tsai <wens@csie.org>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dom Cobley <dom@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: linux-kernel@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

---
Changes in v8:
- Changed slightly the helper API to pass in the features
- Removed unused tv_mode_support function
- Removed mode name match in _pick_cmdline_mode
- Added unit tests to the get_modes helper
- Collected Noralf and Mateusz tags
- Rebased on drm-misc-next-2022-11-10
- Link to v7: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v7-0-7072a478c6b3@cerno.tech

Changes in v7:
- Switch to another implementation of get_modes from Noralf
- Made more checks in VEC's atomic_check
- Fixed typo in a commit log
- Checked for tv_mode_specified in drm_mode_parse_command_line_for_connector
- Rebased on drm-misc-next-2022-11-03
- Link to v6: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v6-0-e7792734108f@cerno.tech

Changes in v6:
- Add and convert to a new get_modes helper to create the PAL and NTSC modes in
  the proper order, with the right preferred mode flag, depending on the driver
  capabilities and defaults.
- Support PAL60
- Renamed tests to be consistent with DRM tests naming convention
- Simplified a bit the named mode parsing code
- Add a tv_mode_specified field
- Return 0 in get_modes implementations instead of error codes
- Link to v5: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v5-0-d841cc64fe4b@cerno.tech

Changes in v5:
- Dropped TV Standard documentation removal
- Switched the TV Mode documentation from CSV to actual documentation
- Switched to kunit assertions where possible
- Switched to KUNIT_ASSERT_NOT_NULL instead of KUNIT_ASSERT_PTR_NE(..., NULL)
- Shuffled a bit the introduction of drm_client_modeset_connector_get_modes between patches
- Renamed tv_mode_names to legacy_tv_mode_names
- Removed the count variable in sun4i_tv_comp_get_modes
- Rebased on top of current drm-misc-next
- Link to v4: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-0-60d38873f782@cerno.tech

Changes in v4:
- Removed the unused TV Standard property documentation
- Added the TV Mode property documentation to kms-properties.csv
- Fixed the documentation of drm_mode_create_tv_properties()
- Removed DRM_MODE_TV_MODE_NONE
- Reworded the line length check comment in drm_mode_analog_tv tests
- Switched to HZ_PER_KHZ in drm_mode_analog_tv tests
- Reworked drm_mode_analog_tv to fill our mode using the previously computed
  timings
- Added the command-line option documentation to modedb.rst
- Improved the Kunit helpers cleanup
- Moved the subconnector documentation renaming to the proper patch
- Added the various review tags
- Removed the count variable in vc4_vec_connector_get_modes
- Rebased on drm-misc-next-2022-09-23 and fixed a merge conflict
- Folded all the named mode parsing improvements in a single patch
- Link to v3: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v2-0-f733a0ed9f90@cerno.tech

Changes in v3:
- Applied some of the fixes to vc4 and sun4i
- Renamed the old TV mode property to legacy_mode
- Fixed a bunch of bisection errors
- Removed most of the redundant TV modes
- Added a new None TV mode to not fall back on NTSC by mistake
- Fixed the mode generation function to match better what is expected
- Added some logging to the mode generation function
- Split the improvements to the named mode parsing logic into separate patches
- Added more checks to the TV atomic_check helper
- Link to v2: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v2-0-459522d653a7@cerno.tech/

Changes in v2:
- Kept the older TV mode property as legacy so we can keep the old drivers functional
- Renamed the tv_norm property to tv_mode
- Added a function to create PAL and NTSC compatible display modes
- Added some helpers to instantiate a mock DRM device in Kunit
- More Kunit tests
- Removed the HD analog TV modes
- Renamed some of the tests
- Renamed some of the named modes
- Fixed typos in commit logs
- Added the various tags
- Link to v1: https://lore.kernel.org/dri-devel/20220728-rpi-analog-tv-properties-v1-0-3d53ae722097@cerno.tech/

---
Mateusz Kwiatkowski (2):
      drm/vc4: vec: Check for VEC output constraints
      drm/vc4: vec: Add support for more analog TV standards

Maxime Ripard (21):
      drm/tests: Add Kunit Helpers
      drm/connector: Rename legacy TV property
      drm/connector: Only register TV mode property if present
      drm/connector: Rename drm_mode_create_tv_properties
      drm/connector: Add TV standard property
      drm/modes: Add a function to generate analog display modes
      drm/client: Add some tests for drm_connector_pick_cmdline_mode()
      drm/modes: Move named modes parsing to a separate function
      drm/modes: Switch to named mode descriptors
      drm/modes: Fill drm_cmdline mode from named modes
      drm/connector: Add pixel clock to cmdline mode
      drm/connector: Add a function to lookup a TV mode by its name
      drm/modes: Introduce the tv_mode property as a command-line option
      drm/modes: Properly generate a drm_display_mode from a named mode
      drm/client: Remove match on mode name
      drm/modes: Introduce more named modes
      drm/atomic-helper: Add a TV properties reset helper
      drm/atomic-helper: Add an analog TV atomic_check implementation
      drm/vc4: vec: Use TV Reset implementation
      drm/vc4: vec: Convert to the new TV mode property
      drm/sun4i: tv: Convert to the new TV mode property

Noralf Trønnes (1):
      drm/probe-helper: Provide a TV get_modes helper

 Documentation/fb/modedb.rst                     |   2 +
 Documentation/gpu/drm-kms.rst                   |   6 +
 drivers/gpu/drm/drm_atomic_state_helper.c       | 124 +++++
 drivers/gpu/drm/drm_atomic_uapi.c               |   4 +
 drivers/gpu/drm/drm_client_modeset.c            |   8 +-
 drivers/gpu/drm/drm_connector.c                 | 173 ++++++-
 drivers/gpu/drm/drm_modes.c                     | 634 +++++++++++++++++++++++-
 drivers/gpu/drm/drm_probe_helper.c              |  82 +++
 drivers/gpu/drm/gud/gud_connector.c             |  10 +-
 drivers/gpu/drm/i2c/ch7006_drv.c                |   6 +-
 drivers/gpu/drm/i915/display/intel_tv.c         |   4 +-
 drivers/gpu/drm/nouveau/dispnv04/tvnv17.c       |   6 +-
 drivers/gpu/drm/sun4i/sun4i_tv.c                | 141 ++----
 drivers/gpu/drm/tests/Makefile                  |   4 +
 drivers/gpu/drm/tests/drm_client_modeset_test.c | 229 +++++++++
 drivers/gpu/drm/tests/drm_cmdline_parser_test.c |  67 +++
 drivers/gpu/drm/tests/drm_connector_test.c      |  90 ++++
 drivers/gpu/drm/tests/drm_kunit_helpers.c       |  64 +++
 drivers/gpu/drm/tests/drm_kunit_helpers.h       |   9 +
 drivers/gpu/drm/tests/drm_modes_test.c          | 145 ++++++
 drivers/gpu/drm/tests/drm_probe_helper_test.c   | 209 ++++++++
 drivers/gpu/drm/vc4/vc4_vec.c                   | 342 +++++++++++--
 include/drm/drm_atomic_state_helper.h           |   4 +
 include/drm/drm_connector.h                     |  89 +++-
 include/drm/drm_mode_config.h                   |  12 +-
 include/drm/drm_modes.h                         |  17 +
 include/drm/drm_probe_helper.h                  |   1 +
 27 files changed, 2274 insertions(+), 208 deletions(-)
---
base-commit: dcf6c3602352a550a6e01667486bde6cbcc770ef
change-id: 20220728-rpi-analog-tv-properties-0914dfcee460

Best regards,
-- 
Maxime Ripard <maxime@cerno.tech>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-11-10 11:07 UTC|newest]

Thread overview: 162+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-10 11:07 Maxime Ripard [this message]
2022-11-10 11:07 ` [PATCH v8 00/24] drm: Analog TV Improvements Maxime Ripard
2022-11-10 11:07 ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07 ` Maxime Ripard
2022-11-10 11:07 ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 01/24] drm/tests: Add Kunit Helpers Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 02/24] drm/connector: Rename legacy TV property Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 03/24] drm/connector: Only register TV mode property if present Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 04/24] drm/connector: Rename drm_mode_create_tv_properties Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 05/24] drm/connector: Add TV standard property Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 06/24] drm/modes: Add a function to generate analog display modes Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 23:01   ` Maíra Canal
2022-11-10 23:01     ` Maíra Canal
2022-11-10 23:01     ` [Intel-gfx] " Maíra Canal
2022-11-10 23:01     ` Maíra Canal
2022-11-10 23:01     ` [Nouveau] " Maíra Canal
2022-11-10 11:07 ` [PATCH v8 07/24] drm/client: Add some tests for drm_connector_pick_cmdline_mode() Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 08/24] drm/modes: Move named modes parsing to a separate function Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 09/24] drm/modes: Switch to named mode descriptors Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 10/24] drm/modes: Fill drm_cmdline mode from named modes Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 11/24] drm/connector: Add pixel clock to cmdline mode Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 12/24] drm/connector: Add a function to lookup a TV mode by its name Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 23:11   ` Maíra Canal
2022-11-10 23:11     ` [Intel-gfx] " Maíra Canal
2022-11-10 23:11     ` Maíra Canal
2022-11-10 23:11     ` Maíra Canal
2022-11-10 23:11     ` [Nouveau] " Maíra Canal
2022-11-10 11:07 ` [PATCH v8 13/24] drm/modes: Introduce the tv_mode property as a command-line option Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 14/24] drm/modes: Properly generate a drm_display_mode from a named mode Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-12 16:29   ` Noralf Trønnes
2022-11-12 16:29     ` Noralf Trønnes
2022-11-12 16:29     ` [Intel-gfx] " Noralf Trønnes
2022-11-12 16:29     ` Noralf Trønnes
2022-11-12 16:29     ` [Nouveau] " Noralf Trønnes
2022-11-10 11:07 ` [PATCH v8 15/24] drm/client: Remove match on mode name Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-12 16:30   ` Noralf Trønnes
2022-11-12 16:30     ` [Intel-gfx] " Noralf Trønnes
2022-11-12 16:30     ` Noralf Trønnes
2022-11-12 16:30     ` [Nouveau] " Noralf Trønnes
2022-11-12 16:30     ` Noralf Trønnes
2022-11-10 11:07 ` [PATCH v8 16/24] drm/modes: Introduce more named modes Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 23:22   ` Maíra Canal
2022-11-10 23:22     ` Maíra Canal
2022-11-10 23:22     ` [Intel-gfx] " Maíra Canal
2022-11-10 23:22     ` Maíra Canal
2022-11-12 16:32   ` Noralf Trønnes
2022-11-12 16:32     ` Noralf Trønnes
2022-11-12 16:32     ` [Intel-gfx] " Noralf Trønnes
2022-11-12 16:32     ` Noralf Trønnes
2022-11-12 16:32     ` [Nouveau] " Noralf Trønnes
2022-11-10 11:07 ` [PATCH v8 17/24] drm/probe-helper: Provide a TV get_modes helper Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 23:29   ` Maíra Canal
2022-11-10 23:29     ` Maíra Canal
2022-11-10 23:29     ` [Intel-gfx] " Maíra Canal
2022-11-10 23:29     ` Maíra Canal
2022-11-10 23:29     ` [Nouveau] " Maíra Canal
2022-11-10 11:07 ` [PATCH v8 18/24] drm/atomic-helper: Add a TV properties reset helper Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 19/24] drm/atomic-helper: Add an analog TV atomic_check implementation Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 20/24] drm/vc4: vec: Use TV Reset implementation Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 21/24] drm/vc4: vec: Check for VEC output constraints Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 22/24] drm/vc4: vec: Convert to the new TV mode property Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 23/24] drm/vc4: vec: Add support for more analog TV standards Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-10 11:07 ` [PATCH v8 24/24] drm/sun4i: tv: Convert to the new TV mode property Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Intel-gfx] " Maxime Ripard
2022-11-10 11:07   ` Maxime Ripard
2022-11-10 11:07   ` [Nouveau] " Maxime Ripard
2022-11-11  1:40 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm: Analog TV Improvements (rev9) Patchwork
2022-11-11  1:40 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-11-11  2:10 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220728-rpi-analog-tv-properties-v8-0-09ce1466967c@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=bskeggs@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emma@anholt.net \
    --cc=geert@linux-m68k.org \
    --cc=hdegoede@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=kfyatek+publicgit@gmail.com \
    --cc=kherbst@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=lyude@redhat.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=noralf@tronnes.org \
    --cc=nouveau@lists.freedesktop.org \
    --cc=phil@raspberrypi.com \
    --cc=rodrigo.vivi@intel.com \
    --cc=samuel@sholland.org \
    --cc=tvrtko.ursulin@linux.intel.com \
    --cc=tzimmermann@suse.de \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.