From: Colin Foster <colin.foster@in-advantage.com> To: linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Terry Bowman <terry.bowman@amd.com>, Vladimir Oltean <vladimir.oltean@nxp.com>, Wolfram Sang <wsa@kernel.org>, Andy Shevchenko <andy.shevchenko@gmail.com>, UNGLinuxDriver@microchip.com, Steen Hegelund <Steen.Hegelund@microchip.com>, Lars Povlsen <lars.povlsen@microchip.com>, Linus Walleij <linus.walleij@linaro.org>, Paolo Abeni <pabeni@redhat.com>, Jakub Kicinski <kuba@kernel.org>, Eric Dumazet <edumazet@google.com>, "David S. Miller" <davem@davemloft.net>, Russell King <linux@armlinux.org.uk>, Heiner Kallweit <hkallweit1@gmail.com>, Andrew Lunn <andrew@lunn.ch>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Rob Herring <robh+dt@kernel.org>, Lee Jones <lee.jones@linaro.org>, katie.morris@in-advantage.com, Florian Fainelli <f.fainelli@gmail.com> Subject: [PATCH v15 mfd 5/9] pinctrl: microchip-sgpio: allow sgpio driver to be used as a module Date: Tue, 2 Aug 2022 22:47:24 -0700 [thread overview] Message-ID: <20220803054728.1541104-6-colin.foster@in-advantage.com> (raw) In-Reply-To: <20220803054728.1541104-1-colin.foster@in-advantage.com> As the commit message suggests, this simply adds the ability to select SGPIO pinctrl as a module. This becomes more practical when the SGPIO hardware exists on an external chip, controlled indirectly by I2C or SPI. This commit enables that level of control. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- (No changes since before v14) v14 * No changes --- drivers/pinctrl/Kconfig | 5 ++++- drivers/pinctrl/pinctrl-microchip-sgpio.c | 6 +++++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index ba48ff8be6e2..4e8d0ae6c81e 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -292,7 +292,7 @@ config PINCTRL_MCP23S08 corresponding interrupt-controller. config PINCTRL_MICROCHIP_SGPIO - bool "Pinctrl driver for Microsemi/Microchip Serial GPIO" + tristate "Pinctrl driver for Microsemi/Microchip Serial GPIO" depends on OF depends on HAS_IOMEM select GPIOLIB @@ -310,6 +310,9 @@ config PINCTRL_MICROCHIP_SGPIO connect control signals from SFP modules and to act as an LED controller. + If compiled as a module, the module name will be + pinctrl-microchip-sgpio. + config PINCTRL_OCELOT tristate "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs" depends on OF diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c index 6f55bf7d5e05..e56074b7e659 100644 --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c @@ -999,6 +999,7 @@ static const struct of_device_id microchip_sgpio_gpio_of_match[] = { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, microchip_sgpio_gpio_of_match); static struct platform_driver microchip_sgpio_pinctrl_driver = { .driver = { @@ -1008,4 +1009,7 @@ static struct platform_driver microchip_sgpio_pinctrl_driver = { }, .probe = microchip_sgpio_probe, }; -builtin_platform_driver(microchip_sgpio_pinctrl_driver); +module_platform_driver(microchip_sgpio_pinctrl_driver); + +MODULE_DESCRIPTION("Microchip SGPIO Pinctrl Driver"); +MODULE_LICENSE("GPL"); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Colin Foster <colin.foster@in-advantage.com> To: linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Terry Bowman <terry.bowman@amd.com>, Vladimir Oltean <vladimir.oltean@nxp.com>, Wolfram Sang <wsa@kernel.org>, Andy Shevchenko <andy.shevchenko@gmail.com>, UNGLinuxDriver@microchip.com, Steen Hegelund <Steen.Hegelund@microchip.com>, Lars Povlsen <lars.povlsen@microchip.com>, Linus Walleij <linus.walleij@linaro.org>, Paolo Abeni <pabeni@redhat.com>, Jakub Kicinski <kuba@kernel.org>, Eric Dumazet <edumazet@google.com>, "David S. Miller" <davem@davemloft.net>, Russell King <linux@armlinux.org.uk>, Heiner Kallweit <hkallweit1@gmail.com>, Andrew Lunn <andrew@lunn.ch>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Rob Herring <robh+dt@kernel.org>, Lee Jones <lee.jones@linaro.org>, katie.morris@in-advantage.com, Florian Fainelli <f.fainelli@gmail.com> Subject: [PATCH v15 mfd 5/9] pinctrl: microchip-sgpio: allow sgpio driver to be used as a module Date: Tue, 2 Aug 2022 22:47:24 -0700 [thread overview] Message-ID: <20220803054728.1541104-6-colin.foster@in-advantage.com> (raw) In-Reply-To: <20220803054728.1541104-1-colin.foster@in-advantage.com> As the commit message suggests, this simply adds the ability to select SGPIO pinctrl as a module. This becomes more practical when the SGPIO hardware exists on an external chip, controlled indirectly by I2C or SPI. This commit enables that level of control. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- (No changes since before v14) v14 * No changes --- drivers/pinctrl/Kconfig | 5 ++++- drivers/pinctrl/pinctrl-microchip-sgpio.c | 6 +++++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index ba48ff8be6e2..4e8d0ae6c81e 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -292,7 +292,7 @@ config PINCTRL_MCP23S08 corresponding interrupt-controller. config PINCTRL_MICROCHIP_SGPIO - bool "Pinctrl driver for Microsemi/Microchip Serial GPIO" + tristate "Pinctrl driver for Microsemi/Microchip Serial GPIO" depends on OF depends on HAS_IOMEM select GPIOLIB @@ -310,6 +310,9 @@ config PINCTRL_MICROCHIP_SGPIO connect control signals from SFP modules and to act as an LED controller. + If compiled as a module, the module name will be + pinctrl-microchip-sgpio. + config PINCTRL_OCELOT tristate "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs" depends on OF diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c index 6f55bf7d5e05..e56074b7e659 100644 --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c @@ -999,6 +999,7 @@ static const struct of_device_id microchip_sgpio_gpio_of_match[] = { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, microchip_sgpio_gpio_of_match); static struct platform_driver microchip_sgpio_pinctrl_driver = { .driver = { @@ -1008,4 +1009,7 @@ static struct platform_driver microchip_sgpio_pinctrl_driver = { }, .probe = microchip_sgpio_probe, }; -builtin_platform_driver(microchip_sgpio_pinctrl_driver); +module_platform_driver(microchip_sgpio_pinctrl_driver); + +MODULE_DESCRIPTION("Microchip SGPIO Pinctrl Driver"); +MODULE_LICENSE("GPL"); -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-03 5:48 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-03 5:47 [PATCH v15 mfd 0/9] add support for VSC7512 control over SPI Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 5:47 ` [PATCH v15 mfd 1/9] mfd: ocelot: add helper to get regmap from a resource Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 11:31 ` Andy Shevchenko 2022-08-03 11:31 ` Andy Shevchenko 2022-08-03 5:47 ` [PATCH v15 mfd 2/9] net: mdio: mscc-miim: add ability to be used in a non-mmio configuration Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 11:31 ` Andy Shevchenko 2022-08-03 11:31 ` Andy Shevchenko 2022-08-03 5:47 ` [PATCH v15 mfd 3/9] pinctrl: ocelot: allow pinctrl-ocelot to be loaded as a module Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 5:47 ` [PATCH v15 mfd 4/9] pinctrl: ocelot: add ability to be used in a non-mmio configuration Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 5:47 ` Colin Foster [this message] 2022-08-03 5:47 ` [PATCH v15 mfd 5/9] pinctrl: microchip-sgpio: allow sgpio driver to be used as a module Colin Foster 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 5:47 ` [PATCH v15 mfd 6/9] pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 11:32 ` Andy Shevchenko 2022-08-03 5:47 ` [PATCH v15 mfd 7/9] resource: add define macro for register address resources Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 11:33 ` Andy Shevchenko 2022-08-03 11:33 ` Andy Shevchenko 2022-08-03 5:47 ` [PATCH v15 mfd 8/9] dt-bindings: mfd: ocelot: add bindings for VSC7512 Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 5:47 ` [PATCH v15 mfd 9/9] mfd: ocelot: add support for the vsc7512 chip via spi Colin Foster 2022-08-03 5:47 ` Colin Foster 2022-08-03 11:45 ` Andy Shevchenko 2022-08-03 11:45 ` Andy Shevchenko 2022-08-03 15:56 ` Colin Foster 2022-08-03 15:56 ` Colin Foster 2022-08-03 17:10 ` Andy Shevchenko 2022-08-03 17:10 ` Andy Shevchenko 2022-08-03 17:31 ` Colin Foster 2022-08-03 17:31 ` Colin Foster 2022-08-05 17:44 ` Colin Foster 2022-08-05 17:44 ` Colin Foster 2022-08-05 17:58 ` Andy Shevchenko 2022-08-05 17:58 ` Andy Shevchenko 2022-08-05 18:07 ` Colin Foster 2022-08-05 18:07 ` Colin Foster 2022-08-05 18:14 ` Andy Shevchenko 2022-08-05 18:14 ` Andy Shevchenko
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220803054728.1541104-6-colin.foster@in-advantage.com \ --to=colin.foster@in-advantage.com \ --cc=Steen.Hegelund@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=andrew@lunn.ch \ --cc=andy.shevchenko@gmail.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=edumazet@google.com \ --cc=f.fainelli@gmail.com \ --cc=hkallweit1@gmail.com \ --cc=katie.morris@in-advantage.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=kuba@kernel.org \ --cc=lars.povlsen@microchip.com \ --cc=lee.jones@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=netdev@vger.kernel.org \ --cc=pabeni@redhat.com \ --cc=robh+dt@kernel.org \ --cc=terry.bowman@amd.com \ --cc=vladimir.oltean@nxp.com \ --cc=wsa@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.