All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bo-Chen Chen <rex-bc.chen@mediatek.com>
To: <chunkuang.hu@kernel.org>, <p.zabel@pengutronix.de>,
	<daniel@ffwll.ch>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <mripard@kernel.org>,
	<tzimmermann@suse.de>, <matthias.bgg@gmail.com>, <deller@gmx.de>,
	<airlied@linux.ie>
Cc: <msp@baylibre.com>, <granquet@baylibre.com>,
	<jitao.shi@mediatek.com>, <wenst@chromium.org>,
	<angelogioacchino.delregno@collabora.com>, <ck.hu@mediatek.com>,
	<liangxu.xu@mediatek.com>, <dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-fbdev@vger.kernel.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	Bo-Chen Chen <rex-bc.chen@mediatek.com>
Subject: [PATCH v16 5/8] drm/mediatek: add hpd debounce
Date: Fri, 5 Aug 2022 18:14:56 +0800	[thread overview]
Message-ID: <20220805101459.3386-6-rex-bc.chen@mediatek.com> (raw)
In-Reply-To: <20220805101459.3386-1-rex-bc.chen@mediatek.com>

From: Jitao Shi <jitao.shi@mediatek.com>

From the DP spec 1.4a chapter 3.3, upstream devices should implement
HPD signal de-bouncing on an external connection.
A period of 100ms should be used to detect an HPD connect event.
To cover these cases, HPD de-bounce should be implemented only after
HPD low has been detected for at least 100ms.

Therefore,
1. If HPD is low (which means plugging out) for longer than 100ms:
   we need to do de-bouncing (which means we need to wait for 100ms).
2. If HPD low is for less than 100ms:
   we don't need to care about the de-bouncing.

In this patch, we start a 100ms timer and use a need_debounce boolean
to implement the feature.

Two cases when HPD is high:
1. If the timer is expired (>100ms):
   - need_debounce is true.
   - When HPD high (plugging event comes), need_debounce will be true
     and then we need to do de-bouncing (wait for 100ms).
2. If the timer is not expired (<100ms):
   - need_debounce is false.
   - When HPD high (plugging event comes), need_debounce will be false
     and no need to do de-bouncing.

HPD_______             __________________
          |            |<-  100ms   ->
          |____________|
          <-  100ms   ->

Without HPD de-bouncing, USB-C to HDMI Adapaters will not be detected.

The change has been successfully tested with the following devices:
- Dell Adapter - USB-C to HDMI
- Acer 1in1 HDMI dongle
- Ugreen 1in1 HDMI dongle
- innowatt HDMI + USB3 hub
- Acer 2in1 HDMI dongle
- Apple 3in1 HDMI dongle (A2119)
- J5Create 3in1 HDMI dongle (JAC379)

Tested-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/gpu/drm/mediatek/mtk_dp.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
index 00971ea2fadf..487f3ed0c19f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dp.c
+++ b/drivers/gpu/drm/mediatek/mtk_dp.c
@@ -95,6 +95,8 @@ struct mtk_dp {
 	bool enabled;
 
 	struct drm_connector *conn;
+	bool need_debounce;
+	struct timer_list debounce_timer;
 };
 
 struct mtk_dp_data {
@@ -1479,6 +1481,9 @@ static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
 
 	dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n");
 
+	if (mtk_dp->need_debounce && mtk_dp->train_info.cable_plugged_in)
+		msleep(100);
+
 	drm_helper_hpd_irq_event(mtk_dp->bridge.dev);
 	mtk_dp->train_info.hpd_inerrupt = false;
 	mtk_dp_hpd_sink_event(mtk_dp);
@@ -1525,6 +1530,10 @@ static irqreturn_t mtk_dp_hpd_event(int hpd, void *dev)
 		mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
 				   DP_PWR_STATE_BANDGAP_TPLL,
 				   DP_PWR_STATE_MASK);
+
+		mod_timer(&mtk_dp->debounce_timer,
+			  jiffies + msecs_to_jiffies(100) - 1);
+		mtk_dp->need_debounce = false;
 	} else {
 		mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
 				   DP_PWR_STATE_BANDGAP_TPLL_LANE,
@@ -1945,6 +1954,13 @@ static const struct drm_bridge_funcs mtk_dp_bridge_funcs = {
 	.detect = mtk_dp_bdg_detect,
 };
 
+static void mtk_dp_debounce_timer(struct timer_list *t)
+{
+	struct mtk_dp *mtk_dp = from_timer(mtk_dp, t, debounce_timer);
+
+	mtk_dp->need_debounce = true;
+}
+
 static int mtk_dp_probe(struct platform_device *pdev)
 {
 	struct mtk_dp *mtk_dp;
@@ -2020,6 +2036,9 @@ static int mtk_dp_probe(struct platform_device *pdev)
 
 	drm_bridge_add(&mtk_dp->bridge);
 
+	mtk_dp->need_debounce = true;
+	timer_setup(&mtk_dp->debounce_timer, mtk_dp_debounce_timer, 0);
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
@@ -2032,6 +2051,7 @@ static int mtk_dp_remove(struct platform_device *pdev)
 
 	platform_device_unregister(mtk_dp->phy_dev);
 	mtk_dp_video_mute(mtk_dp, true);
+	del_timer_sync(&mtk_dp->debounce_timer);
 
 	pm_runtime_disable(&pdev->dev);
 
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Bo-Chen Chen <rex-bc.chen@mediatek.com>
To: <chunkuang.hu@kernel.org>, <p.zabel@pengutronix.de>,
	<daniel@ffwll.ch>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <mripard@kernel.org>,
	<tzimmermann@suse.de>, <matthias.bgg@gmail.com>, <deller@gmx.de>,
	<airlied@linux.ie>
Cc: <msp@baylibre.com>, <granquet@baylibre.com>,
	<jitao.shi@mediatek.com>, <wenst@chromium.org>,
	<angelogioacchino.delregno@collabora.com>, <ck.hu@mediatek.com>,
	<liangxu.xu@mediatek.com>, <dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-fbdev@vger.kernel.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	Bo-Chen Chen <rex-bc.chen@mediatek.com>
Subject: [PATCH v16 5/8] drm/mediatek: add hpd debounce
Date: Fri, 5 Aug 2022 18:14:56 +0800	[thread overview]
Message-ID: <20220805101459.3386-6-rex-bc.chen@mediatek.com> (raw)
In-Reply-To: <20220805101459.3386-1-rex-bc.chen@mediatek.com>

From: Jitao Shi <jitao.shi@mediatek.com>

From the DP spec 1.4a chapter 3.3, upstream devices should implement
HPD signal de-bouncing on an external connection.
A period of 100ms should be used to detect an HPD connect event.
To cover these cases, HPD de-bounce should be implemented only after
HPD low has been detected for at least 100ms.

Therefore,
1. If HPD is low (which means plugging out) for longer than 100ms:
   we need to do de-bouncing (which means we need to wait for 100ms).
2. If HPD low is for less than 100ms:
   we don't need to care about the de-bouncing.

In this patch, we start a 100ms timer and use a need_debounce boolean
to implement the feature.

Two cases when HPD is high:
1. If the timer is expired (>100ms):
   - need_debounce is true.
   - When HPD high (plugging event comes), need_debounce will be true
     and then we need to do de-bouncing (wait for 100ms).
2. If the timer is not expired (<100ms):
   - need_debounce is false.
   - When HPD high (plugging event comes), need_debounce will be false
     and no need to do de-bouncing.

HPD_______             __________________
          |            |<-  100ms   ->
          |____________|
          <-  100ms   ->

Without HPD de-bouncing, USB-C to HDMI Adapaters will not be detected.

The change has been successfully tested with the following devices:
- Dell Adapter - USB-C to HDMI
- Acer 1in1 HDMI dongle
- Ugreen 1in1 HDMI dongle
- innowatt HDMI + USB3 hub
- Acer 2in1 HDMI dongle
- Apple 3in1 HDMI dongle (A2119)
- J5Create 3in1 HDMI dongle (JAC379)

Tested-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/gpu/drm/mediatek/mtk_dp.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
index 00971ea2fadf..487f3ed0c19f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dp.c
+++ b/drivers/gpu/drm/mediatek/mtk_dp.c
@@ -95,6 +95,8 @@ struct mtk_dp {
 	bool enabled;
 
 	struct drm_connector *conn;
+	bool need_debounce;
+	struct timer_list debounce_timer;
 };
 
 struct mtk_dp_data {
@@ -1479,6 +1481,9 @@ static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
 
 	dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n");
 
+	if (mtk_dp->need_debounce && mtk_dp->train_info.cable_plugged_in)
+		msleep(100);
+
 	drm_helper_hpd_irq_event(mtk_dp->bridge.dev);
 	mtk_dp->train_info.hpd_inerrupt = false;
 	mtk_dp_hpd_sink_event(mtk_dp);
@@ -1525,6 +1530,10 @@ static irqreturn_t mtk_dp_hpd_event(int hpd, void *dev)
 		mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
 				   DP_PWR_STATE_BANDGAP_TPLL,
 				   DP_PWR_STATE_MASK);
+
+		mod_timer(&mtk_dp->debounce_timer,
+			  jiffies + msecs_to_jiffies(100) - 1);
+		mtk_dp->need_debounce = false;
 	} else {
 		mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
 				   DP_PWR_STATE_BANDGAP_TPLL_LANE,
@@ -1945,6 +1954,13 @@ static const struct drm_bridge_funcs mtk_dp_bridge_funcs = {
 	.detect = mtk_dp_bdg_detect,
 };
 
+static void mtk_dp_debounce_timer(struct timer_list *t)
+{
+	struct mtk_dp *mtk_dp = from_timer(mtk_dp, t, debounce_timer);
+
+	mtk_dp->need_debounce = true;
+}
+
 static int mtk_dp_probe(struct platform_device *pdev)
 {
 	struct mtk_dp *mtk_dp;
@@ -2020,6 +2036,9 @@ static int mtk_dp_probe(struct platform_device *pdev)
 
 	drm_bridge_add(&mtk_dp->bridge);
 
+	mtk_dp->need_debounce = true;
+	timer_setup(&mtk_dp->debounce_timer, mtk_dp_debounce_timer, 0);
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
@@ -2032,6 +2051,7 @@ static int mtk_dp_remove(struct platform_device *pdev)
 
 	platform_device_unregister(mtk_dp->phy_dev);
 	mtk_dp_video_mute(mtk_dp, true);
+	del_timer_sync(&mtk_dp->debounce_timer);
 
 	pm_runtime_disable(&pdev->dev);
 
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Bo-Chen Chen <rex-bc.chen@mediatek.com>
To: <chunkuang.hu@kernel.org>, <p.zabel@pengutronix.de>,
	<daniel@ffwll.ch>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <mripard@kernel.org>,
	<tzimmermann@suse.de>, <matthias.bgg@gmail.com>, <deller@gmx.de>,
	<airlied@linux.ie>
Cc: devicetree@vger.kernel.org, linux-fbdev@vger.kernel.org,
	granquet@baylibre.com, jitao.shi@mediatek.com,
	liangxu.xu@mediatek.com, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, msp@baylibre.com,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	Bo-Chen Chen <rex-bc.chen@mediatek.com>,
	linux-mediatek@lists.infradead.org, wenst@chromium.org,
	linux-arm-kernel@lists.infradead.org,
	angelogioacchino.delregno@collabora.com
Subject: [PATCH v16 5/8] drm/mediatek: add hpd debounce
Date: Fri, 5 Aug 2022 18:14:56 +0800	[thread overview]
Message-ID: <20220805101459.3386-6-rex-bc.chen@mediatek.com> (raw)
In-Reply-To: <20220805101459.3386-1-rex-bc.chen@mediatek.com>

From: Jitao Shi <jitao.shi@mediatek.com>

From the DP spec 1.4a chapter 3.3, upstream devices should implement
HPD signal de-bouncing on an external connection.
A period of 100ms should be used to detect an HPD connect event.
To cover these cases, HPD de-bounce should be implemented only after
HPD low has been detected for at least 100ms.

Therefore,
1. If HPD is low (which means plugging out) for longer than 100ms:
   we need to do de-bouncing (which means we need to wait for 100ms).
2. If HPD low is for less than 100ms:
   we don't need to care about the de-bouncing.

In this patch, we start a 100ms timer and use a need_debounce boolean
to implement the feature.

Two cases when HPD is high:
1. If the timer is expired (>100ms):
   - need_debounce is true.
   - When HPD high (plugging event comes), need_debounce will be true
     and then we need to do de-bouncing (wait for 100ms).
2. If the timer is not expired (<100ms):
   - need_debounce is false.
   - When HPD high (plugging event comes), need_debounce will be false
     and no need to do de-bouncing.

HPD_______             __________________
          |            |<-  100ms   ->
          |____________|
          <-  100ms   ->

Without HPD de-bouncing, USB-C to HDMI Adapaters will not be detected.

The change has been successfully tested with the following devices:
- Dell Adapter - USB-C to HDMI
- Acer 1in1 HDMI dongle
- Ugreen 1in1 HDMI dongle
- innowatt HDMI + USB3 hub
- Acer 2in1 HDMI dongle
- Apple 3in1 HDMI dongle (A2119)
- J5Create 3in1 HDMI dongle (JAC379)

Tested-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/gpu/drm/mediatek/mtk_dp.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
index 00971ea2fadf..487f3ed0c19f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dp.c
+++ b/drivers/gpu/drm/mediatek/mtk_dp.c
@@ -95,6 +95,8 @@ struct mtk_dp {
 	bool enabled;
 
 	struct drm_connector *conn;
+	bool need_debounce;
+	struct timer_list debounce_timer;
 };
 
 struct mtk_dp_data {
@@ -1479,6 +1481,9 @@ static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
 
 	dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n");
 
+	if (mtk_dp->need_debounce && mtk_dp->train_info.cable_plugged_in)
+		msleep(100);
+
 	drm_helper_hpd_irq_event(mtk_dp->bridge.dev);
 	mtk_dp->train_info.hpd_inerrupt = false;
 	mtk_dp_hpd_sink_event(mtk_dp);
@@ -1525,6 +1530,10 @@ static irqreturn_t mtk_dp_hpd_event(int hpd, void *dev)
 		mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
 				   DP_PWR_STATE_BANDGAP_TPLL,
 				   DP_PWR_STATE_MASK);
+
+		mod_timer(&mtk_dp->debounce_timer,
+			  jiffies + msecs_to_jiffies(100) - 1);
+		mtk_dp->need_debounce = false;
 	} else {
 		mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
 				   DP_PWR_STATE_BANDGAP_TPLL_LANE,
@@ -1945,6 +1954,13 @@ static const struct drm_bridge_funcs mtk_dp_bridge_funcs = {
 	.detect = mtk_dp_bdg_detect,
 };
 
+static void mtk_dp_debounce_timer(struct timer_list *t)
+{
+	struct mtk_dp *mtk_dp = from_timer(mtk_dp, t, debounce_timer);
+
+	mtk_dp->need_debounce = true;
+}
+
 static int mtk_dp_probe(struct platform_device *pdev)
 {
 	struct mtk_dp *mtk_dp;
@@ -2020,6 +2036,9 @@ static int mtk_dp_probe(struct platform_device *pdev)
 
 	drm_bridge_add(&mtk_dp->bridge);
 
+	mtk_dp->need_debounce = true;
+	timer_setup(&mtk_dp->debounce_timer, mtk_dp_debounce_timer, 0);
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
@@ -2032,6 +2051,7 @@ static int mtk_dp_remove(struct platform_device *pdev)
 
 	platform_device_unregister(mtk_dp->phy_dev);
 	mtk_dp_video_mute(mtk_dp, true);
+	del_timer_sync(&mtk_dp->debounce_timer);
 
 	pm_runtime_disable(&pdev->dev);
 
-- 
2.18.0


  parent reply	other threads:[~2022-08-05 10:15 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-05 10:14 [PATCH v16 0/8] drm/mediatek: Add MT8195 DisplayPort driver Bo-Chen Chen
2022-08-05 10:14 ` Bo-Chen Chen
2022-08-05 10:14 ` Bo-Chen Chen
2022-08-05 10:14 ` [PATCH v16 1/8] dt-bindings: mediatek,dp: Add Display Port binding Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-09 19:46   ` Rob Herring
2022-08-09 19:46     ` Rob Herring
2022-08-09 19:46     ` Rob Herring
2022-08-05 10:14 ` [PATCH v16 2/8] video/hdmi: Add audio_infoframe packing for DP Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14 ` [PATCH v16 3/8] drm/mediatek: Add MT8195 Embedded DisplayPort driver Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-08  4:03   ` CK Hu
2022-08-08  4:03     ` CK Hu
2022-08-08  4:03     ` CK Hu
2022-08-08  4:48   ` CK Hu
2022-08-08  4:48     ` CK Hu
2022-08-08  4:48     ` CK Hu
2022-08-08  5:16   ` CK Hu
2022-08-08  5:16     ` CK Hu
2022-08-08  5:16     ` CK Hu
2022-08-08  5:21   ` CK Hu
2022-08-08  5:21     ` CK Hu
2022-08-08  5:21     ` CK Hu
2022-08-09  8:06     ` Bo-Chen Chen
2022-08-09  8:06       ` Bo-Chen Chen
2022-08-09  8:06       ` Bo-Chen Chen
2022-08-08  5:46   ` CK Hu
2022-08-08  5:46     ` CK Hu
2022-08-08  5:46     ` CK Hu
2022-08-09  7:57     ` Bo-Chen Chen
2022-08-09  7:57       ` Bo-Chen Chen
2022-08-09  7:57       ` Bo-Chen Chen
2022-08-08  5:50   ` CK Hu
2022-08-08  5:50     ` CK Hu
2022-08-08  5:50     ` CK Hu
2022-08-08  8:04   ` CK Hu
2022-08-08  8:04     ` CK Hu
2022-08-08  8:04     ` CK Hu
2022-08-09  8:01     ` Bo-Chen Chen
2022-08-09  8:01       ` Bo-Chen Chen
2022-08-09  8:01       ` Bo-Chen Chen
2022-08-05 10:14 ` [PATCH v16 4/8] drm/mediatek: Add MT8195 External DisplayPort support Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-08  3:56   ` CK Hu
2022-08-08  3:56     ` CK Hu
2022-08-08  3:56     ` CK Hu
2022-08-05 10:14 ` Bo-Chen Chen [this message]
2022-08-05 10:14   ` [PATCH v16 5/8] drm/mediatek: add hpd debounce Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14 ` [PATCH v16 6/8] drm/mediatek: set monitor to DP_SET_POWER_D3 to avoid garbage Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14 ` [PATCH v16 7/8] drm/mediatek: DP audio support for MT8195 Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14 ` [PATCH v16 8/8] drm/mediatek: Use cached audio config when changing resolution Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen
2022-08-05 10:14   ` Bo-Chen Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220805101459.3386-6-rex-bc.chen@mediatek.com \
    --to=rex-bc.chen@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=ck.hu@mediatek.com \
    --cc=daniel@ffwll.ch \
    --cc=deller@gmx.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=granquet@baylibre.com \
    --cc=jitao.shi@mediatek.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=liangxu.xu@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mripard@kernel.org \
    --cc=msp@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=tzimmermann@suse.de \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.