From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>, Jacky Bai <ping.bai@nxp.com> Subject: [PATCH 2/7] arm64: dts: imx93: add gpio clk Date: Fri, 12 Aug 2022 15:46:04 +0800 [thread overview] Message-ID: <20220812074609.53131-3-peng.fan@oss.nxp.com> (raw) In-Reply-To: <20220812074609.53131-1-peng.fan@oss.nxp.com> From: Peng Fan <peng.fan@nxp.com> Add the GPIO clk, otherwise GPIO may not work if clk driver disable the GPIO clk during kernel boot. Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 431dc239631d..26d5ce4a5f2c 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -295,6 +295,9 @@ gpio2: gpio@43810080 { interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO2_GATE>, + <&clk IMX93_CLK_GPIO2_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 32 32>; }; @@ -306,6 +309,9 @@ gpio3: gpio@43820080 { interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO3_GATE>, + <&clk IMX93_CLK_GPIO3_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 64 32>; }; @@ -317,6 +323,9 @@ gpio4: gpio@43830080 { interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO4_GATE>, + <&clk IMX93_CLK_GPIO4_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 96 32>; }; @@ -328,6 +337,9 @@ gpio1: gpio@47400080 { interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO1_GATE>, + <&clk IMX93_CLK_GPIO1_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 0 32>; }; }; -- 2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com> To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>, Jacky Bai <ping.bai@nxp.com> Subject: [PATCH 2/7] arm64: dts: imx93: add gpio clk Date: Fri, 12 Aug 2022 15:46:04 +0800 [thread overview] Message-ID: <20220812074609.53131-3-peng.fan@oss.nxp.com> (raw) In-Reply-To: <20220812074609.53131-1-peng.fan@oss.nxp.com> From: Peng Fan <peng.fan@nxp.com> Add the GPIO clk, otherwise GPIO may not work if clk driver disable the GPIO clk during kernel boot. Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 431dc239631d..26d5ce4a5f2c 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -295,6 +295,9 @@ gpio2: gpio@43810080 { interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO2_GATE>, + <&clk IMX93_CLK_GPIO2_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 32 32>; }; @@ -306,6 +309,9 @@ gpio3: gpio@43820080 { interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO3_GATE>, + <&clk IMX93_CLK_GPIO3_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 64 32>; }; @@ -317,6 +323,9 @@ gpio4: gpio@43830080 { interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO4_GATE>, + <&clk IMX93_CLK_GPIO4_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 96 32>; }; @@ -328,6 +337,9 @@ gpio1: gpio@47400080 { interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO1_GATE>, + <&clk IMX93_CLK_GPIO1_GATE>; + clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 0 32>; }; }; -- 2.37.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-12 7:44 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-12 7:46 [PATCH 0/7] arm64: dts: imx93: add several nodes Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) 2022-08-12 7:46 ` [PATCH 1/7] arm64: dts: imx93: correct SDHC clk entry Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) [this message] 2022-08-12 7:46 ` [PATCH 2/7] arm64: dts: imx93: add gpio clk Peng Fan (OSS) 2022-08-12 7:46 ` [PATCH 3/7] arm64: dts: imx93: add s4 mu node Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) 2022-08-12 10:07 ` Krzysztof Kozlowski 2022-08-12 10:07 ` Krzysztof Kozlowski 2022-08-12 7:46 ` [PATCH 4/7] arm64: dts: imx93: add blk ctrl node Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) 2022-08-12 10:08 ` Krzysztof Kozlowski 2022-08-12 10:08 ` Krzysztof Kozlowski 2022-08-12 7:46 ` [PATCH 5/7] arm64: dts: imx93: add a55 pmu Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) 2022-08-12 7:46 ` [PATCH 6/7] arm64: dts: imx93: add lpi2c nodes Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) 2022-08-12 10:09 ` Krzysztof Kozlowski 2022-08-12 10:09 ` Krzysztof Kozlowski 2022-08-12 7:46 ` [PATCH 7/7] arm64: dts: imx93: add lpspi nodes Peng Fan (OSS) 2022-08-12 7:46 ` Peng Fan (OSS) 2022-08-12 10:10 ` Krzysztof Kozlowski 2022-08-12 10:10 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220812074609.53131-3-peng.fan@oss.nxp.com \ --to=peng.fan@oss.nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=peng.fan@nxp.com \ --cc=ping.bai@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.