All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	<wim@linux-watchdog.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>, <linux@roeck-us.net>,
	<nfraprado@collabora.com>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	"Nathan Chancellor" <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	"Nancy . Lin" <nancy.lin@mediatek.com>,
	"jason-jh . lin" <jason-jh.lin@mediatek.com>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<dri-devel@lists.freedesktop.org>, <llvm@lists.linux.dev>,
	<singo.chang@mediatek.com>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v26 06/10] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Date: Fri, 19 Aug 2022 14:10:07 +0800	[thread overview]
Message-ID: <20220819061011.7672-7-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20220819061011.7672-1-nancy.lin@mediatek.com>

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
---
 drivers/soc/mediatek/mtk-mmsys.c       | 54 +++++++++++++++++++-------
 include/linux/soc/mediatek/mtk-mmsys.h | 15 +++++--
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 48d5e5d1d0a1..999be064103b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -178,6 +178,7 @@ struct mtk_mmsys {
 	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
 	struct reset_controller_dev rcdev;
 	phys_addr_t io_start;
+	struct cmdq_client_reg cmdq_base;
 };
 
 static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
@@ -192,10 +193,24 @@ static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
 	return -EINVAL;
 }
 
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	u32 tmp;
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (cmdq_pkt) {
+		if (mmsys->cmdq_base.size == 0) {
+			pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+			return;
+		}
+		cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+				    mmsys->cmdq_base.offset + offset, val,
+				    mask);
+		return;
+	}
+#endif
+
 	tmp = readl_relaxed(mmsys->regs + offset);
 	tmp = (tmp & ~mask) | val;
 	writel_relaxed(tmp, mmsys->regs + offset);
@@ -212,7 +227,7 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
-					      routes[i].val);
+					      routes[i].val, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -226,42 +241,45 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
-			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
+			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
-			      ~0, height << 16 | width);
+			      ~0, height << 16 | width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height)
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
-			      be_height << 16 | be_width);
+			      be_height << 16 | be_width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth)
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
 {
 	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
-			      alpha << 16 | alpha);
+			      alpha << 16 | alpha, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
-			      alpha_sel << (19 + idx));
+			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode);
+			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap)
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      BIT(4), channel_swap << 4);
+			      BIT(4), channel_swap << 4, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
 
@@ -274,9 +292,9 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	spin_lock_irqsave(&mmsys->lock, flags);
 
 	if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
 	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
 
 	spin_unlock_irqrestore(&mmsys->lock, flags);
 
@@ -366,6 +384,12 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		mmsys->data = match_data->drv_data[0];
 	}
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
 	platform_set_drvdata(pdev, mmsys);
 
 	clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index 74aab1fc570d..343e093f0fc3 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
 #ifndef __MTK_MMSYS_H
 #define __MTK_MMSYS_H
 
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
 enum mtk_ddp_comp_id;
 struct device;
 
@@ -74,13 +78,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 			      enum mtk_ddp_comp_id cur,
 			      enum mtk_ddp_comp_id next);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+				  int height, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height);
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth);
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap);
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt);
 
 #endif /* __MTK_MMSYS_H */
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	<wim@linux-watchdog.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>, <linux@roeck-us.net>,
	<nfraprado@collabora.com>
Cc: devicetree@vger.kernel.org,
	Project_Global_Chrome_Upstream_Group@mediatek.com,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	David Airlie <airlied@linux.ie>,
	"jason-jh . lin" <jason-jh.lin@mediatek.com>,
	singo.chang@mediatek.com, llvm@lists.linux.dev,
	Nick Desaulniers <ndesaulniers@google.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Nathan Chancellor <nathan@kernel.org>,
	"Nancy . Lin" <nancy.lin@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v26 06/10] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Date: Fri, 19 Aug 2022 14:10:07 +0800	[thread overview]
Message-ID: <20220819061011.7672-7-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20220819061011.7672-1-nancy.lin@mediatek.com>

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
---
 drivers/soc/mediatek/mtk-mmsys.c       | 54 +++++++++++++++++++-------
 include/linux/soc/mediatek/mtk-mmsys.h | 15 +++++--
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 48d5e5d1d0a1..999be064103b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -178,6 +178,7 @@ struct mtk_mmsys {
 	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
 	struct reset_controller_dev rcdev;
 	phys_addr_t io_start;
+	struct cmdq_client_reg cmdq_base;
 };
 
 static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
@@ -192,10 +193,24 @@ static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
 	return -EINVAL;
 }
 
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	u32 tmp;
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (cmdq_pkt) {
+		if (mmsys->cmdq_base.size == 0) {
+			pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+			return;
+		}
+		cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+				    mmsys->cmdq_base.offset + offset, val,
+				    mask);
+		return;
+	}
+#endif
+
 	tmp = readl_relaxed(mmsys->regs + offset);
 	tmp = (tmp & ~mask) | val;
 	writel_relaxed(tmp, mmsys->regs + offset);
@@ -212,7 +227,7 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
-					      routes[i].val);
+					      routes[i].val, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -226,42 +241,45 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
-			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
+			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
-			      ~0, height << 16 | width);
+			      ~0, height << 16 | width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height)
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
-			      be_height << 16 | be_width);
+			      be_height << 16 | be_width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth)
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
 {
 	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
-			      alpha << 16 | alpha);
+			      alpha << 16 | alpha, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
-			      alpha_sel << (19 + idx));
+			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode);
+			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap)
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      BIT(4), channel_swap << 4);
+			      BIT(4), channel_swap << 4, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
 
@@ -274,9 +292,9 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	spin_lock_irqsave(&mmsys->lock, flags);
 
 	if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
 	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
 
 	spin_unlock_irqrestore(&mmsys->lock, flags);
 
@@ -366,6 +384,12 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		mmsys->data = match_data->drv_data[0];
 	}
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
 	platform_set_drvdata(pdev, mmsys);
 
 	clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index 74aab1fc570d..343e093f0fc3 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
 #ifndef __MTK_MMSYS_H
 #define __MTK_MMSYS_H
 
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
 enum mtk_ddp_comp_id;
 struct device;
 
@@ -74,13 +78,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 			      enum mtk_ddp_comp_id cur,
 			      enum mtk_ddp_comp_id next);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+				  int height, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height);
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth);
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap);
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt);
 
 #endif /* __MTK_MMSYS_H */
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Nancy.Lin <nancy.lin@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	<wim@linux-watchdog.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>, <linux@roeck-us.net>,
	<nfraprado@collabora.com>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	"Nathan Chancellor" <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	"Nancy . Lin" <nancy.lin@mediatek.com>,
	"jason-jh . lin" <jason-jh.lin@mediatek.com>,
	Yongqiang Niu <yongqiang.niu@mediatek.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<dri-devel@lists.freedesktop.org>, <llvm@lists.linux.dev>,
	<singo.chang@mediatek.com>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v26 06/10] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Date: Fri, 19 Aug 2022 14:10:07 +0800	[thread overview]
Message-ID: <20220819061011.7672-7-nancy.lin@mediatek.com> (raw)
In-Reply-To: <20220819061011.7672-1-nancy.lin@mediatek.com>

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
---
 drivers/soc/mediatek/mtk-mmsys.c       | 54 +++++++++++++++++++-------
 include/linux/soc/mediatek/mtk-mmsys.h | 15 +++++--
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 48d5e5d1d0a1..999be064103b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -178,6 +178,7 @@ struct mtk_mmsys {
 	spinlock_t lock; /* protects mmsys_sw_rst_b reg */
 	struct reset_controller_dev rcdev;
 	phys_addr_t io_start;
+	struct cmdq_client_reg cmdq_base;
 };
 
 static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
@@ -192,10 +193,24 @@ static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
 	return -EINVAL;
 }
 
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	u32 tmp;
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	if (cmdq_pkt) {
+		if (mmsys->cmdq_base.size == 0) {
+			pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+			return;
+		}
+		cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+				    mmsys->cmdq_base.offset + offset, val,
+				    mask);
+		return;
+	}
+#endif
+
 	tmp = readl_relaxed(mmsys->regs + offset);
 	tmp = (tmp & ~mask) | val;
 	writel_relaxed(tmp, mmsys->regs + offset);
@@ -212,7 +227,7 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
-					      routes[i].val);
+					      routes[i].val, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -226,42 +241,45 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 
 	for (i = 0; i < mmsys->data->num_routes; i++)
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
-			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0);
+			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+				  struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
-			      ~0, height << 16 | width);
+			      ~0, height << 16 | width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height)
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
-			      be_height << 16 | be_width);
+			      be_height << 16 | be_width, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth)
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
 {
 	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
 
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
-			      alpha << 16 | alpha);
+			      alpha << 16 | alpha, cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
-			      alpha_sel << (19 + idx));
+			      alpha_sel << (19 + idx), cmdq_pkt);
 	mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode);
+			      GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap)
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt)
 {
 	mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
-			      BIT(4), channel_swap << 4);
+			      BIT(4), channel_swap << 4, cmdq_pkt);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
 
@@ -274,9 +292,9 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	spin_lock_irqsave(&mmsys->lock, flags);
 
 	if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0);
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
 	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id));
+		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
 
 	spin_unlock_irqrestore(&mmsys->lock, flags);
 
@@ -366,6 +384,12 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
 		mmsys->data = match_data->drv_data[0];
 	}
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
 	platform_set_drvdata(pdev, mmsys);
 
 	clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index 74aab1fc570d..343e093f0fc3 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
 #ifndef __MTK_MMSYS_H
 #define __MTK_MMSYS_H
 
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
 enum mtk_ddp_comp_id;
 struct device;
 
@@ -74,13 +78,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
 			      enum mtk_ddp_comp_id cur,
 			      enum mtk_ddp_comp_id next);
 
-void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+				  int height, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height);
+void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int be_height,
+			   struct cmdq_pkt *cmdq_pkt);
 
 void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
-			       u8 mode, u32 biwidth);
+			       u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
 
-void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap);
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+				     struct cmdq_pkt *cmdq_pkt);
 
 #endif /* __MTK_MMSYS_H */
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-08-19  6:10 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-19  6:10 [PATCH v26 00/10] Add MediaTek SoC(vdosys1) support for mt8195 Nancy.Lin
2022-08-19  6:10 ` Nancy.Lin
2022-08-19  6:10 ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 01/10] dt-bindings: reset: mt8195: add vdosys1 reset control bit Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 02/10] soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 03/10] soc: mediatek: add mtk-mmsys support for mt8195 vdosys1 Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 04/10] soc: mediatek: add mtk_mmsys_update_bits API Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 05/10] soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1 Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` Nancy.Lin [this message]
2022-08-19  6:10   ` [PATCH v26 06/10] soc: mediatek: add cmdq support of " Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 07/10] soc: mediatek: mmsys: add mmsys for support 64 reset bits Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-23 10:20   ` Matthias Brugger
2022-08-23 10:20     ` Matthias Brugger
2022-08-23 10:20     ` Matthias Brugger
2022-08-23 11:30     ` Nancy.Lin
2022-08-23 11:30       ` Nancy.Lin
2022-08-23 11:30       ` Nancy.Lin
2022-08-23 12:08       ` Matthias Brugger
2022-08-23 12:08         ` Matthias Brugger
2022-08-23 12:08         ` Matthias Brugger
2022-08-24  2:44         ` Nancy.Lin
2022-08-24  2:44           ` Nancy.Lin
2022-08-24  2:44           ` Nancy.Lin
2022-08-24 11:41           ` Matthias Brugger
2022-08-24 11:41             ` Matthias Brugger
2022-08-24 11:41             ` Matthias Brugger
2022-08-25  2:19             ` Nancy.Lin
2022-08-25  2:19               ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 08/10] soc: mediatek: mmsys: add reset control for MT8195 vdosys1 Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 09/10] soc: mediatek: add mtk-mutex component - dp_intf1 Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10 ` [PATCH v26 10/10] soc: mediatek: add mtk-mutex support for mt8195 vdosys1 Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin
2022-08-19  6:10   ` Nancy.Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220819061011.7672-7-nancy.lin@mediatek.com \
    --to=nancy.lin@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jason-jh.lin@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@roeck-us.net \
    --cc=llvm@lists.linux.dev \
    --cc=matthias.bgg@gmail.com \
    --cc=nathan@kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=nfraprado@collabora.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=singo.chang@mediatek.com \
    --cc=wim@linux-watchdog.org \
    --cc=yongqiang.niu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.