All of lore.kernel.org
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xenproject.org, x86@kernel.org,
	linux-kernel@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	"H. Peter Anvin" <hpa@zytor.com>
Subject: [PATCH v2 07/10] x86/mtrr: simplify mtrr_bp_init()
Date: Sat, 20 Aug 2022 11:25:30 +0200	[thread overview]
Message-ID: <20220820092533.29420-8-jgross@suse.com> (raw)
In-Reply-To: <20220820092533.29420-1-jgross@suse.com>

In case of the generic cache interface being used (Intel cpus or a
64-bit system), the initialization sequence of the boot cpu is more
complicated as necessary:

- check if MTRR enabled, if yes, call mtrr_bp_pat_init() which will
  disable caching, set the PAT MSR, and reenable caching

- call mtrr_cleanup(), in case that changed anything, call
  cache_cpu_init() doing the same caching disable/enable dance as
  above, but this time with setting the (modified) MTRR state (even
  if MTRR was disabled) AND setting the PAT MSR (again even with
  disabled MTRR)

The sequence can be simplified a lot while removing potential
inconsistencies:

- check if MTRR enabled, if yes, call mtrr_cleanup() and then
  cache_cpu_init()

This ensures to:

- no longer disable/enable caching more than once

- avoid to set MTRRs and/or the PAT MSR on the boot processor in case
  of MTRR cleanups even if MTRRs meant to be disabled

With that mtrr_bp_pat_init() can be removed.

Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- new patch
---
 arch/x86/kernel/cpu/mtrr/generic.c | 14 --------------
 arch/x86/kernel/cpu/mtrr/mtrr.c    |  7 ++-----
 arch/x86/kernel/cpu/mtrr/mtrr.h    |  1 -
 3 files changed, 2 insertions(+), 20 deletions(-)

diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 1c6260b94cb9..b6be476c77af 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -442,20 +442,6 @@ static void __init print_mtrr_state(void)
 		pr_debug("TOM2: %016llx aka %lldM\n", mtrr_tom2, mtrr_tom2>>20);
 }
 
-/* PAT setup for BP. We need to go through sync steps here */
-void __init mtrr_bp_pat_init(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	cache_disable();
-
-	pat_init();
-
-	cache_enable();
-	local_irq_restore(flags);
-}
-
 /* Grab all of the MTRR state for this CPU into *state */
 bool __init get_mtrr_state(void)
 {
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.c b/arch/x86/kernel/cpu/mtrr/mtrr.c
index 19662ab057be..ca348dcc5bf8 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.c
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.c
@@ -761,13 +761,10 @@ void __init mtrr_bp_init(void)
 			mtrr_enabled = get_mtrr_state();
 
 			if (mtrr_enabled) {
-				mtrr_bp_pat_init();
 				cache_generic |= CACHE_GENERIC_MTRR |
 						 CACHE_GENERIC_PAT;
-			}
-
-			if (mtrr_cleanup(phys_addr)) {
-				changed_by_mtrr_cleanup = 1;
+				changed_by_mtrr_cleanup =
+					mtrr_cleanup(phys_addr);
 				cache_cpu_init();
 			}
 		}
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 3b1883185185..c98928ceee6a 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -50,7 +50,6 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
 void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
 bool get_mtrr_state(void);
-void mtrr_bp_pat_init(void);
 
 extern void __init set_mtrr_ops(const struct mtrr_ops *ops);
 
-- 
2.35.3


  parent reply	other threads:[~2022-08-20  9:26 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-20  9:25 [PATCH v2 00/10] x86: make pat and mtrr independent from each other Juergen Gross
2022-08-20  9:25 ` [PATCH v2 01/10] x86/mtrr: fix MTRR fixup on APs Juergen Gross
2022-08-20 10:28   ` Greg KH
2022-08-21 12:25   ` Borislav Petkov
2022-08-21 21:41     ` Borislav Petkov
2022-08-22  5:17       ` Juergen Gross
2022-08-22  8:28         ` Borislav Petkov
2022-08-22  8:32           ` Juergen Gross
2022-10-19 18:45   ` [tip: x86/cpu] x86/mtrr: Add comment for set_mtrr_state() serialization tip-bot2 for Juergen Gross
2022-08-20  9:25 ` [PATCH v2 02/10] x86/mtrr: remove unused cyrix_set_all() function Juergen Gross
2022-08-25 10:31   ` Borislav Petkov
2022-08-25 10:38     ` Juergen Gross
2022-08-25 10:41     ` Juergen Gross
2022-08-25 11:42       ` Borislav Petkov
2022-08-25 12:13         ` Juergen Gross
2022-08-20  9:25 ` [PATCH v2 03/10] x86/mtrr: replace use_intel() with a local flag Juergen Gross
2022-08-20  9:25 ` [PATCH v2 04/10] x86: move some code out of arch/x86/kernel/cpu/mtrr Juergen Gross
2022-08-20  9:25 ` [PATCH v2 05/10] x86/mtrr: split generic_set_all() Juergen Gross
2022-08-20  9:25 ` [PATCH v2 06/10] x86/mtrr: remove set_all callback from struct mtrr_ops Juergen Gross
2022-08-20  9:25 ` Juergen Gross [this message]
2022-08-20  9:25 ` [PATCH v2 08/10] x86/mtrr: let cache_aps_delayed_init replace mtrr_aps_delayed_init Juergen Gross
2022-08-20  9:25 ` [PATCH v2 09/10] x86/mtrr: add a stop_machine() handler calling only cache_cpu_init() Juergen Gross
2022-08-20  9:25 ` [PATCH v2 10/10] x86: decouple pat and mtrr handling Juergen Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220820092533.29420-8-jgross@suse.com \
    --to=jgross@suse.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.