From: Horatiu Vultur <horatiu.vultur@microchip.com> To: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Cc: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <arnd@arndb.de>, <olof@lixom.net>, <soc@kernel.org>, <nicolas.ferre@microchip.com>, <claudiu.beznea@microchip.com>, <UNGLinuxDriver@microchip.com>, <maxime.chevallier@bootlin.com>, "Horatiu Vultur" <horatiu.vultur@microchip.com> Subject: [PATCH v3] ARM: dts: lan966x: add support for pcb8290 Date: Wed, 24 Aug 2022 08:55:27 +0200 [thread overview] Message-ID: <20220824065527.157334-1-horatiu.vultur@microchip.com> (raw) Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a quad-port) on the external MDIO bus and no SFP ports. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- v2->v3: - update coma-mode-gpios, set them to OPEN_DRAIN v1->v2: - add comments for pps_out_pins and ptp_ext_pins pins - fix commit message. --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/lan966x-pcb8290.dts | 171 ++++++++++++++++++++++++++ 2 files changed, 172 insertions(+) create mode 100644 arch/arm/boot/dts/lan966x-pcb8290.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05d8aef6e5d2..595e870750cd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \ dtb-$(CONFIG_SOC_LAN966) += \ lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ lan966x-kontron-kswitch-d10-mmt-8g.dtb \ + lan966x-pcb8290.dtb \ lan966x-pcb8291.dtb \ lan966x-pcb8309.dtb dtb-$(CONFIG_SOC_LS1021A) += \ diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts new file mode 100644 index 000000000000..3d93049fdf57 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * lan966x_pcb8290.dts - Device Tree file for PCB8290 + */ +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + model = "Microchip EVB LAN9668"; + compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966"; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&gpio { + miim_a_pins: mdio-pins { + /* MDC, MDIO */ + pins = "GPIO_28", "GPIO_29"; + function = "miim_a"; + }; + + pps_out_pins: pps-out-pins { + /* 1pps output */ + pins = "GPIO_38"; + function = "ptpsync_3"; + }; + + ptp_ext_pins: ptp-ext-pins { + /* 1pps input */ + pins = "GPIO_35"; + function = "ptpsync_0"; + }; + + udc_pins: ucd-pins { + /* VBUS_DET B */ + pins = "GPIO_8"; + function = "usb_slave_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_a_pins>; + pinctrl-names = "default"; + status = "okay"; + + ext_phy0: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy1: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy2: ethernet-phy@9 { + reg = <9>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy3: ethernet-phy@10 { + reg = <10>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy4: ethernet-phy@15 { + reg = <15>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy5: ethernet-phy@16 { + reg = <16>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy6: ethernet-phy@17 { + reg = <17>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy7: ethernet-phy@18 { + reg = <18>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; +}; + +&port0 { + reg = <2>; + phy-handle = <&ext_phy2>; + phy-mode = "qsgmii"; + phys = <&serdes 0 SERDES6G(1)>; + status = "okay"; +}; + +&port1 { + reg = <3>; + phy-handle = <&ext_phy3>; + phy-mode = "qsgmii"; + phys = <&serdes 1 SERDES6G(1)>; + status = "okay"; +}; + +&port2 { + reg = <0>; + phy-handle = <&ext_phy0>; + phy-mode = "qsgmii"; + phys = <&serdes 2 SERDES6G(1)>; + status = "okay"; +}; + +&port3 { + reg = <1>; + phy-handle = <&ext_phy1>; + phy-mode = "qsgmii"; + phys = <&serdes 3 SERDES6G(1)>; + status = "okay"; +}; + +&port4 { + reg = <6>; + phy-handle = <&ext_phy6>; + phy-mode = "qsgmii"; + phys = <&serdes 4 SERDES6G(2)>; + status = "okay"; +}; + +&port5 { + reg = <7>; + phy-handle = <&ext_phy7>; + phy-mode = "qsgmii"; + phys = <&serdes 5 SERDES6G(2)>; + status = "okay"; +}; + +&port6 { + reg = <4>; + phy-handle = <&ext_phy4>; + phy-mode = "qsgmii"; + phys = <&serdes 6 SERDES6G(2)>; + status = "okay"; +}; + +&port7 { + reg = <5>; + phy-handle = <&ext_phy5>; + phy-mode = "qsgmii"; + phys = <&serdes 7 SERDES6G(2)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&switch { + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&udc { + pinctrl-0 = <&udc_pins>; + pinctrl-names = "default"; + atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; -- 2.33.0
WARNING: multiple messages have this Message-ID (diff)
From: Horatiu Vultur <horatiu.vultur@microchip.com> To: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Cc: arnd@arndb.de, UNGLinuxDriver@microchip.com, soc@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, olof@lixom.net, maxime.chevallier@bootlin.com, Horatiu Vultur <horatiu.vultur@microchip.com>, claudiu.beznea@microchip.com Subject: [PATCH v3] ARM: dts: lan966x: add support for pcb8290 Date: Wed, 24 Aug 2022 08:55:27 +0200 [thread overview] Message-ID: <20220824065527.157334-1-horatiu.vultur@microchip.com> (raw) Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a quad-port) on the external MDIO bus and no SFP ports. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- v2->v3: - update coma-mode-gpios, set them to OPEN_DRAIN v1->v2: - add comments for pps_out_pins and ptp_ext_pins pins - fix commit message. --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/lan966x-pcb8290.dts | 171 ++++++++++++++++++++++++++ 2 files changed, 172 insertions(+) create mode 100644 arch/arm/boot/dts/lan966x-pcb8290.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 05d8aef6e5d2..595e870750cd 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \ dtb-$(CONFIG_SOC_LAN966) += \ lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ lan966x-kontron-kswitch-d10-mmt-8g.dtb \ + lan966x-pcb8290.dtb \ lan966x-pcb8291.dtb \ lan966x-pcb8309.dtb dtb-$(CONFIG_SOC_LS1021A) += \ diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts new file mode 100644 index 000000000000..3d93049fdf57 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * lan966x_pcb8290.dts - Device Tree file for PCB8290 + */ +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + model = "Microchip EVB LAN9668"; + compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966"; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&gpio { + miim_a_pins: mdio-pins { + /* MDC, MDIO */ + pins = "GPIO_28", "GPIO_29"; + function = "miim_a"; + }; + + pps_out_pins: pps-out-pins { + /* 1pps output */ + pins = "GPIO_38"; + function = "ptpsync_3"; + }; + + ptp_ext_pins: ptp-ext-pins { + /* 1pps input */ + pins = "GPIO_35"; + function = "ptpsync_0"; + }; + + udc_pins: ucd-pins { + /* VBUS_DET B */ + pins = "GPIO_8"; + function = "usb_slave_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_a_pins>; + pinctrl-names = "default"; + status = "okay"; + + ext_phy0: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy1: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy2: ethernet-phy@9 { + reg = <9>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy3: ethernet-phy@10 { + reg = <10>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy4: ethernet-phy@15 { + reg = <15>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy5: ethernet-phy@16 { + reg = <16>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy6: ethernet-phy@17 { + reg = <17>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; + + ext_phy7: ethernet-phy@18 { + reg = <18>; + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>; + }; +}; + +&port0 { + reg = <2>; + phy-handle = <&ext_phy2>; + phy-mode = "qsgmii"; + phys = <&serdes 0 SERDES6G(1)>; + status = "okay"; +}; + +&port1 { + reg = <3>; + phy-handle = <&ext_phy3>; + phy-mode = "qsgmii"; + phys = <&serdes 1 SERDES6G(1)>; + status = "okay"; +}; + +&port2 { + reg = <0>; + phy-handle = <&ext_phy0>; + phy-mode = "qsgmii"; + phys = <&serdes 2 SERDES6G(1)>; + status = "okay"; +}; + +&port3 { + reg = <1>; + phy-handle = <&ext_phy1>; + phy-mode = "qsgmii"; + phys = <&serdes 3 SERDES6G(1)>; + status = "okay"; +}; + +&port4 { + reg = <6>; + phy-handle = <&ext_phy6>; + phy-mode = "qsgmii"; + phys = <&serdes 4 SERDES6G(2)>; + status = "okay"; +}; + +&port5 { + reg = <7>; + phy-handle = <&ext_phy7>; + phy-mode = "qsgmii"; + phys = <&serdes 5 SERDES6G(2)>; + status = "okay"; +}; + +&port6 { + reg = <4>; + phy-handle = <&ext_phy4>; + phy-mode = "qsgmii"; + phys = <&serdes 6 SERDES6G(2)>; + status = "okay"; +}; + +&port7 { + reg = <5>; + phy-handle = <&ext_phy5>; + phy-mode = "qsgmii"; + phys = <&serdes 7 SERDES6G(2)>; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&switch { + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&udc { + pinctrl-0 = <&udc_pins>; + pinctrl-names = "default"; + atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; -- 2.33.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-08-24 6:51 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-24 6:55 Horatiu Vultur [this message] 2022-08-24 6:55 ` [PATCH v3] ARM: dts: lan966x: add support for pcb8290 Horatiu Vultur 2022-08-24 7:53 ` Nicolas Ferre 2022-08-24 7:53 ` Nicolas Ferre
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220824065527.157334-1-horatiu.vultur@microchip.com \ --to=horatiu.vultur@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=arnd@arndb.de \ --cc=claudiu.beznea@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=maxime.chevallier@bootlin.com \ --cc=nicolas.ferre@microchip.com \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.