From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>, <arnd@arndb.de> Cc: <cristian.birsan@microchip.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 5/9] ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges Date: Fri, 26 Aug 2022 11:39:23 +0300 [thread overview] Message-ID: <20220826083927.3107272-6-claudiu.beznea@microchip.com> (raw) In-Reply-To: <20220826083927.3107272-1-claudiu.beznea@microchip.com> Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/boot/dts/at91-sama5d2_icp.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6865be8d7787..6296e3ffd303 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -196,8 +196,8 @@ mcp16502@5b { regulators { vdd_io_reg: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -215,8 +215,8 @@ regulator-state-mem { VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -234,8 +234,8 @@ regulator-state-mem { VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -272,8 +272,8 @@ regulator-state-mem { LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; regulator-always-on; regulator-state-standby { @@ -287,8 +287,8 @@ regulator-state-mem { LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>, <arnd@arndb.de> Cc: <cristian.birsan@microchip.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 5/9] ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges Date: Fri, 26 Aug 2022 11:39:23 +0300 [thread overview] Message-ID: <20220826083927.3107272-6-claudiu.beznea@microchip.com> (raw) In-Reply-To: <20220826083927.3107272-1-claudiu.beznea@microchip.com> Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/boot/dts/at91-sama5d2_icp.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6865be8d7787..6296e3ffd303 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -196,8 +196,8 @@ mcp16502@5b { regulators { vdd_io_reg: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -215,8 +215,8 @@ regulator-state-mem { VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -234,8 +234,8 @@ regulator-state-mem { VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -272,8 +272,8 @@ regulator-state-mem { LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; regulator-always-on; regulator-state-standby { @@ -287,8 +287,8 @@ regulator-state-mem { LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-08-26 8:37 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-08-26 8:39 [PATCH 0/9] ARM: at91: some fixes and one cleanup Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` [PATCH 1/9] ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` [PATCH 2/9] ARM: at91: pm: fix self-refresh for sama7g5 Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` [PATCH 3/9] ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` [PATCH 4/9] ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea [this message] 2022-08-26 8:39 ` [PATCH 5/9] ARM: dts: at91: sama5d2_icp: " Claudiu Beznea 2022-08-26 8:39 ` [PATCH 6/9] ARM: dts: at91: sama7g5ek: " Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` [PATCH 7/9] ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` [PATCH 8/9] ARM: dts: at91: sama5d2_icp: don't keep vdd_other " Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-26 8:39 ` [PATCH 9/9] ARM: dts: at91: sam9x60ek: remove simple-bus for regulators Claudiu Beznea 2022-08-26 8:39 ` Claudiu Beznea 2022-08-31 7:45 ` [PATCH 0/9] ARM: at91: some fixes and one cleanup Claudiu.Beznea 2022-08-31 7:45 ` Claudiu.Beznea
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220826083927.3107272-6-claudiu.beznea@microchip.com \ --to=claudiu.beznea@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=arnd@arndb.de \ --cc=cristian.birsan@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.