[PATCH v2] bus: mhi: host: always print detected modem name

From: Koen Vandeputte <koen.vandeputte@citymesh.com>
To: mhi@lists.linux.dev
Cc: mani@kernel.org, Koen Vandeputte <koen.vandeputte@citymesh.com>
Subject: [PATCH v2] bus: mhi: host: always print detected modem name
Date: Wed, 31 Aug 2022 12:03:49 +0200	[thread overview]
Message-ID: <20220831100349.1488762-1-koen.vandeputte@citymesh.com> (raw)

This harmless print provides a very easy way of knowing
if the modem is detected properly during probing.

Promote it to an informational print so no hassle is required
enabling kernel debugging info to obtain it.

The rationale here is that:
On a lot of low-storage embedded devices, extensive kernel
debugging info is not always present as this would
increase it's size to much causing partition size issues.

Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
---

v2 -> sync SoB email with From
 drivers/bus/mhi/host/pci_generic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 9e545f2a5a26..51e2b901bae0 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -841,7 +841,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct mhi_controller *mhi_cntrl;
 	int err;
 
-	dev_dbg(&pdev->dev, "MHI PCI device found: %s\n", info->name);
+	dev_info(&pdev->dev, "MHI PCI device found: %s\n", info->name);
 
 	/* mhi_pdev.mhi_cntrl must be zero-initialized */
 	mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL);
-- 
2.34.1

