All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Li RongQing <lirongqing@baidu.com>
Subject: [PATCH v2 15/23] KVM: x86: Explicitly skip adding vCPU to optimized logical map if LDR==0
Date: Sat,  3 Sep 2022 00:22:46 +0000	[thread overview]
Message-ID: <20220903002254.2411750-16-seanjc@google.com> (raw)
In-Reply-To: <20220903002254.2411750-1-seanjc@google.com>

Explicitly skip adding a vCPU to the optimized map of logical IDs if the
the vCPU's LDR is '0', i.e. if the vCPU will never response to logical
mode interrupts.  KVM already skips the vCPU in this case, but relies on
kvm_apic_map_get_logical_dest() to generate mask==0.  KVM still needs the
mask=0 check as a non-zero LDR can yield mask==0 depending on the mode,
but explicitly handling the LDR will make it simpler to clean up the
logical mode tracking in the future.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/lapic.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4c5f49c4d4f1..80528d86f010 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -318,10 +318,12 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 			continue;
 
 		ldr = kvm_lapic_get_reg(apic, APIC_LDR);
+		if (!ldr)
+			continue;
 
 		if (apic_x2apic_mode(apic)) {
 			new->mode |= KVM_APIC_MODE_X2APIC;
-		} else if (ldr) {
+		} else {
 			ldr = GET_APIC_LOGICAL_ID(ldr);
 			if (kvm_lapic_get_reg(apic, APIC_DFR) == APIC_DFR_FLAT)
 				new->mode |= KVM_APIC_MODE_XAPIC_FLAT;
-- 
2.37.2.789.g6183377224-goog


  parent reply	other threads:[~2022-09-03  0:24 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-03  0:22 [PATCH v2 00/23] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 01/23] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-09-05 21:58   ` Paolo Bonzini
2022-09-03  0:22 ` [PATCH v2 02/23] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
2022-09-05 21:58   ` Paolo Bonzini
2022-09-03  0:22 ` [PATCH v2 03/23] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-09-05 21:59   ` Paolo Bonzini
2022-09-03  0:22 ` [PATCH v2 04/23] KVM: x86: Inhibit AVIC SPTEs if any vCPU enables x2APIC Sean Christopherson
2022-09-05 22:02   ` Paolo Bonzini
2022-09-13 19:52   ` Suthikulpanit, Suravee
2022-09-14  7:39     ` Sean Christopherson
2022-09-14 17:41       ` Suthikulpanit, Suravee
2022-09-16 17:47         ` Sean Christopherson
2022-09-16 19:10     ` Sean Christopherson
2022-09-20 13:07   ` Maxim Levitsky
2022-09-20 15:46     ` Sean Christopherson
2022-09-20 16:50       ` Sean Christopherson
2022-09-23 10:18         ` Maxim Levitsky
2022-09-23 10:19       ` Maxim Levitsky
2022-09-03  0:22 ` [PATCH v2 05/23] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 06/23] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 07/23] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 08/23] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 09/23] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 10/23] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 11/23] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 12/23] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 13/23] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-09-13 23:32   ` Suthikulpanit, Suravee
2022-09-14  7:42     ` Sean Christopherson
2022-09-15  2:11       ` Suthikulpanit, Suravee
2022-09-16 18:52         ` Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 14/23] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-09-03  0:22 ` Sean Christopherson [this message]
2022-09-03  0:22 ` [PATCH v2 16/23] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 17/23] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 18/23] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 19/23] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 20/23] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 21/23] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 22/23] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-09-03  0:22 ` [PATCH v2 23/23] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220903002254.2411750-16-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirongqing@baidu.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=suravee.suthikulpanit@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.