From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> To: soc@kernel.org, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Masami Hiramatsu <mhiramat@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Subject: [PATCH v2 6/8] ARM: dts: uniphier: Add ahci controller and glue layer nodes for PXs2 Date: Mon, 12 Sep 2022 16:15:09 +0900 [thread overview] Message-ID: <20220912071511.1385-7-hayashi.kunihiko@socionext.com> (raw) In-Reply-To: <20220912071511.1385-1-hayashi.kunihiko@socionext.com> Add ahci controller and glue layer nodes including reset and phy. This supports for PXs2 and the boards without PXs2 vodka board that doesn't implement any SATA connectors. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 4 +++ arch/arm/boot/dts/uniphier-pxs2.dtsi | 40 ++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 759384b60663..5f18b926c50a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -99,3 +99,7 @@ &usb0 { &usb1 { status = "okay"; }; + +&ahci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 7d8c437b8f8b..04e9467734c4 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -599,6 +599,46 @@ mdio: mdio { }; }; + ahci: ahci@65600000 { + compatible = "socionext,uniphier-pxs2-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 28>; + resets = <&sys_rst 28>, <&ahci_rst 0>; + ports-implemented = <1>; + phys = <&ahci_phy>; + }; + + ahci-glue@65700000 { + compatible = "socionext,uniphier-pxs2-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci_phy: phy@10 { + compatible = "socionext,uniphier-pxs2-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> To: soc@kernel.org, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net> Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Masami Hiramatsu <mhiramat@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Subject: [PATCH v2 6/8] ARM: dts: uniphier: Add ahci controller and glue layer nodes for PXs2 Date: Mon, 12 Sep 2022 16:15:09 +0900 [thread overview] Message-ID: <20220912071511.1385-7-hayashi.kunihiko@socionext.com> (raw) In-Reply-To: <20220912071511.1385-1-hayashi.kunihiko@socionext.com> Add ahci controller and glue layer nodes including reset and phy. This supports for PXs2 and the boards without PXs2 vodka board that doesn't implement any SATA connectors. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 4 +++ arch/arm/boot/dts/uniphier-pxs2.dtsi | 40 ++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 759384b60663..5f18b926c50a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -99,3 +99,7 @@ &usb0 { &usb1 { status = "okay"; }; + +&ahci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 7d8c437b8f8b..04e9467734c4 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -599,6 +599,46 @@ mdio: mdio { }; }; + ahci: ahci@65600000 { + compatible = "socionext,uniphier-pxs2-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 28>; + resets = <&sys_rst 28>, <&ahci_rst 0>; + ports-implemented = <1>; + phys = <&ahci_phy>; + }; + + ahci-glue@65700000 { + compatible = "socionext,uniphier-pxs2-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci_phy: phy@10 { + compatible = "socionext,uniphier-pxs2-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-12 7:16 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-12 7:15 [PATCH v2 0/8] Update UniPhier armv7 devicetree Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi 2022-09-12 7:15 ` [PATCH v2 1/8] ARM: dts: uniphier: Rename pvtctl node to thermal-sensor Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi 2022-09-12 7:15 ` [PATCH v2 2/8] ARM: dts: uniphier: Rename usb-phy node to usb-glue Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi 2022-09-12 8:32 ` Arnd Bergmann 2022-09-12 8:32 ` Arnd Bergmann 2022-09-12 12:10 ` Kunihiko Hayashi 2022-09-12 12:10 ` Kunihiko Hayashi 2022-09-12 7:15 ` [PATCH v2 3/8] ARM: dts: uniphier: Rename gpio-hog node Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi 2022-09-12 7:15 ` [PATCH v2 4/8] ARM: dts: uniphier: Use GIC interrupt definitions Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi 2022-09-12 7:15 ` [PATCH v2 5/8] ARM: dts: uniphier: Add ahci controller and glue layer nodes for Pro4 Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi [this message] 2022-09-12 7:15 ` [PATCH v2 6/8] ARM: dts: uniphier: Add ahci controller and glue layer nodes for PXs2 Kunihiko Hayashi 2022-09-12 8:36 ` Arnd Bergmann 2022-09-12 8:36 ` Arnd Bergmann 2022-09-12 12:10 ` Kunihiko Hayashi 2022-09-12 12:10 ` Kunihiko Hayashi 2022-09-12 7:15 ` [PATCH v2 7/8] ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi 2022-09-12 7:15 ` [PATCH v2 8/8] ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from pcie-ep node Kunihiko Hayashi 2022-09-12 7:15 ` Kunihiko Hayashi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220912071511.1385-7-hayashi.kunihiko@socionext.com \ --to=hayashi.kunihiko@socionext.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mhiramat@kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.