[PATCH v3 1/2] dt-bindings: dma: rework qcom,adm Documentation to yaml schema

[Christian Marangi <ansuelsmth@gmail.com>]

Rework the qcom,adm Documentation to yaml schema.
This is not a pure conversion since originally the driver has changed
implementation for the #dma-cells and was wrong from the start.
Also the driver now handles the common DMA clients implementation with
the first cell that denotes the channel number and nothing else since
the client will have to provide the crci information via other means.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/dma/qcom,adm.yaml     | 96 +++++++++++++++++++
 .../devicetree/bindings/dma/qcom_adm.txt      | 61 ------------
 2 files changed, 96 insertions(+), 61 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/qcom,adm.yaml
 delete mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt

diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 000000000000..6c08245bf5d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADM DMA Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  QCOM ADM DMA controller provides DMA capabilities for
+  peripheral buses such as NAND and SPI.
+
+properties:
+  compatible:
+    const: qcom,adm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: phandle to the core clock
+      - description: phandle to the iface clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  resets:
+    items:
+      - description: phandle to the clk reset
+      - description: phandle to the c0 reset
+      - description: phandle to the c1 reset
+      - description: phandle to the c2 reset
+
+  reset-names:
+    items:
+      - const: clk
+      - const: c0
+      - const: c1
+      - const: c2
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: indicates the security domain identifier used in the secure world.
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - qcom,ee
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+    adm_dma: dma-controller@18300000 {
+        compatible = "qcom,adm";
+        reg = <0x18300000 0x100000>;
+        interrupts = <0 170 0>;
+        #dma-cells = <1>;
+
+        clocks = <&gcc ADM0_CLK>,
+                  <&gcc ADM0_PBUS_CLK>;
+        clock-names = "core", "iface";
+
+        resets = <&gcc ADM0_RESET>,
+                  <&gcc ADM0_C0_RESET>,
+                  <&gcc ADM0_C1_RESET>,
+                  <&gcc ADM0_C2_RESET>;
+        reset-names = "clk", "c0", "c1", "c2";
+        qcom,ee = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
deleted file mode 100644
index 9d3b2f917b7b..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-QCOM ADM DMA Controller
-
-Required properties:
-- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
-- reg: Address range for DMA registers
-- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
-  denotes CRCI (client rate control interface) flow control assignment.
-- clocks: Should contain the core clock and interface clock.
-- clock-names: Must contain "core" for the core clock and "iface" for the
-  interface clock.
-- resets: Must contain an entry for each entry in reset names.
-- reset-names: Must include the following entries:
-  - clk
-  - c0
-  - c1
-  - c2
-- qcom,ee: indicates the security domain identifier used in the secure world.
-
-Example:
-		adm_dma: dma@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
-			#dma-cells = <2>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				<&gcc ADM0_C0_RESET>,
-				<&gcc ADM0_C1_RESET>,
-				<&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "c0", "c1", "c2";
-			qcom,ee = <0>;
-		};
-
-DMA clients must use the format descripted in the dma.txt file, using a three
-cell specifier for each channel.
-
-Each dmas request consists of 3 cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
-    The CRCI is used for flow control.  It identifies the peripheral device that
-    is the source/destination for the transferred data.
-
-Example:
-
-	spi4: spi@1a280000 {
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		dmas = <&adm_dma 6 9>,
-			<&adm_dma 5 10>;
-		dma-names = "rx", "tx";
-	};
-- 
2.37.2