From: Li Yang <leoyang.li@nxp.com> To: shawnguo@kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Biwen Li <biwen.li@nxp.com>, Li Yang <leoyang.li@nxp.com> Subject: [PATCH v4 4/5] arm64: dts: ls208xa-rdb: fix errata E-00013 Date: Wed, 14 Sep 2022 16:15:37 -0500 [thread overview] Message-ID: <20220914211538.29473-5-leoyang.li@nxp.com> (raw) In-Reply-To: <20220914211538.29473-1-leoyang.li@nxp.com> From: Biwen Li <biwen.li@nxp.com> Specify a channel zero in idle state to avoid enterring tri-stated state for PCA9547. Some information about E-00013: - Description: I2C1 and I2C3 buses are missing pull-up. - Impact: When the PCA954x device is tri-stated, the I2C bus will float. This makes the I2C bus and its associated downstream devices inaccessible. - Hardware fix: Populate resistors R189 and R190 for I2C1 and resistors R228 and R229 for I2C3. - Software fix: Remove the tri-state option from the PCA954x driver(PCA954x always on enable status, specify a channel zero in dts to fix the errata E-00013). Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index f8135c5c252d..3d9647b3da14 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -49,6 +49,8 @@ pca9547@75 { reg = <0x75>; #address-cells = <1>; #size-cells = <0>; + idle-state = <0>; + i2c@1 { #address-cells = <1>; #size-cells = <0>; -- 2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: Li Yang <leoyang.li@nxp.com> To: shawnguo@kernel.org, devicetree@vger.kernel.org Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Biwen Li <biwen.li@nxp.com>, Li Yang <leoyang.li@nxp.com> Subject: [PATCH v4 4/5] arm64: dts: ls208xa-rdb: fix errata E-00013 Date: Wed, 14 Sep 2022 16:15:37 -0500 [thread overview] Message-ID: <20220914211538.29473-5-leoyang.li@nxp.com> (raw) In-Reply-To: <20220914211538.29473-1-leoyang.li@nxp.com> From: Biwen Li <biwen.li@nxp.com> Specify a channel zero in idle state to avoid enterring tri-stated state for PCA9547. Some information about E-00013: - Description: I2C1 and I2C3 buses are missing pull-up. - Impact: When the PCA954x device is tri-stated, the I2C bus will float. This makes the I2C bus and its associated downstream devices inaccessible. - Hardware fix: Populate resistors R189 and R190 for I2C1 and resistors R228 and R229 for I2C3. - Software fix: Remove the tri-state option from the PCA954x driver(PCA954x always on enable status, specify a channel zero in dts to fix the errata E-00013). Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index f8135c5c252d..3d9647b3da14 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -49,6 +49,8 @@ pca9547@75 { reg = <0x75>; #address-cells = <1>; #size-cells = <0>; + idle-state = <0>; + i2c@1 { #address-cells = <1>; #size-cells = <0>; -- 2.37.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-14 21:16 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-14 21:15 [PATCH v4 0/5] ls208xa dts updates Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` [PATCH v4 1/5] arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` [PATCH v4 2/5] arm64: dts: ls2080a-rdb: add phy nodes Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` [PATCH v4 3/5] arm64: dts: ls2081a-rdb: Add DTS for NXP LS2081ARDB Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-14 21:15 ` Li Yang [this message] 2022-09-14 21:15 ` [PATCH v4 4/5] arm64: dts: ls208xa-rdb: fix errata E-00013 Li Yang 2022-09-14 21:15 ` [PATCH v4 5/5] arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A Li Yang 2022-09-14 21:15 ` Li Yang 2022-09-16 12:10 ` [PATCH v4 0/5] ls208xa dts updates Shawn Guo 2022-09-16 12:10 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220914211538.29473-5-leoyang.li@nxp.com \ --to=leoyang.li@nxp.com \ --cc=biwen.li@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.