From: Li Yang <leoyang.li@nxp.com>
To: shawnguo@kernel.org, devicetree@vger.kernel.org
Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Pankaj Bansal <pankaj.bansal@nxp.com>,
Li Yang <leoyang.li@nxp.com>
Subject: [PATCH v2 9/9] arm64: dts: ls1046a-qds: Modify the qspi flash frequency
Date: Thu, 15 Sep 2022 18:34:32 -0500 [thread overview]
Message-ID: <20220915233432.31660-10-leoyang.li@nxp.com> (raw)
In-Reply-To: <20220915233432.31660-1-leoyang.li@nxp.com>
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The qspi flash in ls1046a QDS board can operate at 50MHz frequency.
Therefore, update the maximum supported freq in dts file.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index f969173fb337..b2fcbba60d3a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -182,7 +182,7 @@ qflash0: flash@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <0>;
--
2.37.1
WARNING: multiple messages have this Message-ID (diff)
From: Li Yang <leoyang.li@nxp.com>
To: shawnguo@kernel.org, devicetree@vger.kernel.org
Cc: robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Pankaj Bansal <pankaj.bansal@nxp.com>,
Li Yang <leoyang.li@nxp.com>
Subject: [PATCH v2 9/9] arm64: dts: ls1046a-qds: Modify the qspi flash frequency
Date: Thu, 15 Sep 2022 18:34:32 -0500 [thread overview]
Message-ID: <20220915233432.31660-10-leoyang.li@nxp.com> (raw)
In-Reply-To: <20220915233432.31660-1-leoyang.li@nxp.com>
From: Pankaj Bansal <pankaj.bansal@nxp.com>
The qspi flash in ls1046a QDS board can operate at 50MHz frequency.
Therefore, update the maximum supported freq in dts file.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index f969173fb337..b2fcbba60d3a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -182,7 +182,7 @@ qflash0: flash@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <0>;
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-15 23:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-15 23:34 [PATCH v2 0/9] accumulated dts updates for ls1046a Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` [PATCH v2 1/9] arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` [PATCH v2 2/9] arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` [PATCH v2 3/9] arm64: dts: ls1046a: Add big-endian property for PCIe nodes Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` [PATCH v2 4/9] arm64: dts: ls1046a: add missing dma ranges property Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` [PATCH v2 5/9] arm64: dts: ls1046a: make dma-coherent global to the SoC Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-23 16:10 ` Sean Anderson
2022-09-23 16:10 ` Sean Anderson
2022-09-23 16:26 ` Leo Li
2022-09-23 16:26 ` Leo Li
2022-09-23 16:35 ` Sean Anderson
2022-09-23 16:35 ` Sean Anderson
2022-09-28 23:15 ` Leo Li
2022-09-28 23:15 ` Leo Li
2022-09-29 15:33 ` Sean Anderson
2022-09-29 15:33 ` Sean Anderson
2022-09-15 23:34 ` [PATCH v2 6/9] arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` [PATCH v2 7/9] arm64: dts: ls1046a: add gpios based i2c recovery information Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` [PATCH v2 8/9] arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA Li Yang
2022-09-15 23:34 ` Li Yang
2022-09-15 23:34 ` Li Yang [this message]
2022-09-15 23:34 ` [PATCH v2 9/9] arm64: dts: ls1046a-qds: Modify the qspi flash frequency Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220915233432.31660-10-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pankaj.bansal@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.