From: Luca Weiss <luca@z3ntu.xyz> To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Luca Weiss <luca@z3ntu.xyz>, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, soc@kernel.org, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] ARM: dts: qcom: Add support for Huawei Watch Date: Sat, 17 Sep 2022 17:28:28 +0200 [thread overview] Message-ID: <20220917152829.23568-2-luca@z3ntu.xyz> (raw) In-Reply-To: <20220917152829.23568-1-luca@z3ntu.xyz> Add support for this smartwatch, based on Snapdragon 400 SoC. Currently supported functionality: * Internal storage * USB * Charger * Power button * Bluetooth * Wifi Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/qcom-apq8026-huawei-sturgeon.dts | 343 ++++++++++++++++++ 2 files changed, 344 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3bc6bd5c8238..55087f16d718 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1026,6 +1026,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ + qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts new file mode 100644 index 000000000000..e43fcef7144c --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/delete-node/ &adsp_region; + +/ { + model = "Huawei Watch"; + compatible = "huawei,sturgeon", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 4>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <384000>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vio-supply = <&pm8226_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart4_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a0-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; + }; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-voltage = <4370000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,minimum-input-voltage = <4350000>; + qcom,fast-charge-current-limit = <300000>; + qcom,fast-charge-safe-current = <600000>; + qcom,auto-recharge-threshold-voltage = <4240000>; +}; + +&tlmm { + blsp1_uart4_default_state: blsp1-uart4-default-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "blsp_uart4"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio63", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + touch_default_state: touch-default-state { + irq { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset { + pins = "gpio16"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; -- 2.37.3
WARNING: multiple messages have this Message-ID (diff)
From: Luca Weiss <luca@z3ntu.xyz> To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Luca Weiss <luca@z3ntu.xyz>, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, soc@kernel.org, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] ARM: dts: qcom: Add support for Huawei Watch Date: Sat, 17 Sep 2022 17:28:28 +0200 [thread overview] Message-ID: <20220917152829.23568-2-luca@z3ntu.xyz> (raw) In-Reply-To: <20220917152829.23568-1-luca@z3ntu.xyz> Add support for this smartwatch, based on Snapdragon 400 SoC. Currently supported functionality: * Internal storage * USB * Charger * Power button * Bluetooth * Wifi Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/qcom-apq8026-huawei-sturgeon.dts | 343 ++++++++++++++++++ 2 files changed, 344 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3bc6bd5c8238..55087f16d718 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1026,6 +1026,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ + qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts new file mode 100644 index 000000000000..e43fcef7144c --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/delete-node/ &adsp_region; + +/ { + model = "Huawei Watch"; + compatible = "huawei,sturgeon", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 4>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <384000>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vio-supply = <&pm8226_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart4_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a0-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; + }; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-voltage = <4370000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,minimum-input-voltage = <4350000>; + qcom,fast-charge-current-limit = <300000>; + qcom,fast-charge-safe-current = <600000>; + qcom,auto-recharge-threshold-voltage = <4240000>; +}; + +&tlmm { + blsp1_uart4_default_state: blsp1-uart4-default-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "blsp_uart4"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio63", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + touch_default_state: touch-default-state { + irq { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset { + pins = "gpio16"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; -- 2.37.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-17 15:29 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-17 15:28 [PATCH 1/2] dt-bindings: arm: qcom: Document huawei,sturgeon device Luca Weiss 2022-09-17 15:28 ` Luca Weiss [this message] 2022-09-17 15:28 ` [PATCH 2/2] ARM: dts: qcom: Add support for Huawei Watch Luca Weiss 2022-09-17 16:36 ` Konrad Dybcio 2022-09-17 16:36 ` Konrad Dybcio 2022-09-17 17:06 ` Krzysztof Kozlowski 2022-09-17 17:06 ` Krzysztof Kozlowski 2022-09-17 17:03 ` [PATCH 1/2] dt-bindings: arm: qcom: Document huawei,sturgeon device Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220917152829.23568-2-luca@z3ntu.xyz \ --to=luca@z3ntu.xyz \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=konrad.dybcio@somainline.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=olof@lixom.net \ --cc=phone-devel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ --cc=~postmarketos/upstreaming@lists.sr.ht \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.