[PATCH 06/34] dt-bindings: pinctrl: qcom,sm6115: use common TLMM schema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

Reference common Qualcomm TLMM pin controller schema, to bring common
properties, other pinctrl schemas and additional checks, like function
required only for GPIOs.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 44 +++----------------
 1 file changed, 6 insertions(+), 38 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index e39fbb36d8c1..3f5f5229a86c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -27,30 +27,13 @@ properties:
       - const: south
       - const: east
 
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    description:
-      Specifies the PIN numbers and Flags, as defined in defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
+  "#interrupt-cells": true
   gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
+  "#gpio-cells": true
+  gpio-ranges: true
   gpio-reserved-ranges: true
-
   wakeup-parent: true
 
 #PIN CONFIGURATION NODES
@@ -69,6 +52,7 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
 
     properties:
       pins:
@@ -120,31 +104,15 @@ patternProperties:
     required:
       - pins
 
-    allOf:
-      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-      - if:
-          properties:
-            pins:
-              pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
-        then:
-          required:
-            - function
-
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 required:
   - compatible
   - reg
   - reg-names
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
 
 additionalProperties: false
 
-- 
2.34.1