[PATCH] media: adv748x: afe: Select input port when initializing AFE

["Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>]

When moving the input selection to adv748x_reset() it was missed that
during probe the device is reset _before_ the initialization and parsing
of DT by the AFE subdevice. This can lead to the wrong input port (in
case it's not port 0) being selected until the device is reset for the
first time.

Fix this by restoring the call to adv748x_afe_s_input() in the AFE
initialization while also keeping it in the adv748x_reset().

Fixes: c30ed81afe89 ("media: adv748x: afe: Select input port when device is reset")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/i2c/adv748x/adv748x-afe.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
index 02eabe10ab97..00095c7762c2 100644
--- a/drivers/media/i2c/adv748x/adv748x-afe.c
+++ b/drivers/media/i2c/adv748x/adv748x-afe.c
@@ -521,6 +521,10 @@ int adv748x_afe_init(struct adv748x_afe *afe)
 		}
 	}
 
+	adv748x_afe_s_input(afe, afe->input);
+
+	adv_dbg(state, "AFE Default input set to %d\n", afe->input);
+
 	/* Entity pads and sinks are 0-indexed to match the pads */
 	for (i = ADV748X_AFE_SINK_AIN0; i <= ADV748X_AFE_SINK_AIN7; i++)
 		afe->pads[i].flags = MEDIA_PAD_FL_SINK;
-- 
2.37.3