From: Bryan Brattlof <bb@ti.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>, Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Keerthy <j-keerthy@ti.com>, Linux Thermal <linux-pm@vger.kernel.org>, Linux Device Tree <devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>, Linux ARM <linux-arm-kernel@lists.infradead.org>, Bryan Brattlof <bb@ti.com> Subject: [PATCH 00/11] enable VTM node of all TI's K3 SoCs Date: Tue, 11 Oct 2022 18:17:16 -0500 [thread overview] Message-ID: <20221011231727.8090-1-bb@ti.com> (raw) Hello Everyone! This series enables the VTM nodes for all of Texas Instruments K3 SoCs Most of this series updates the k3_j72xx_bandgap driver to conditionally map an eFuse region used by the j721e to work around an issue in its VTM implementation and allows us to save the SPARE_FUSE region on other SoCs We can then update the device tree bindings for the driver and finally define the VTM nodes for each device. Thanks for reviewing! ~Bryan Bryan Brattlof (11): thermal: k3_j72xx_bandgap: simplify k3_thermal_get_temp() function thermal: k3_j72xx_bandgap: use bool for i2128 erratum flag thermal: k3_j72xx_bandgap: remove fuse_base from structure thermal: k3_j72xx_bandgap: map fuse_base only for erratum workaround dt-bindings: thermal: k3-j72xx: elaborate on binding descriptions dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range arm64: dts: ti: k3-am64-main: add VTM node arm64: dts: ti: k3-am62-wakeup: add VTM node arm64: dts: ti: k3-j721e-mcu-wakeup: add VTM node arm64: dts: ti: k3-j721s2-mcu-wakeup: add VTM node arm64: dts: ti: k3-j7200-mcu-wakeup: add VTM node .../bindings/thermal/ti,j72xx-thermal.yaml | 51 ++++++++- arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi | 33 ++++++ arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-am62.dtsi | 7 +- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi | 33 ++++++ arch/arm64/boot/dts/ti/k3-am64.dtsi | 4 + .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi | 47 ++++++++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 3 + .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 ++ arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 75 +++++++++++++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 3 + .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi | 103 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 3 + drivers/thermal/k3_j72xx_bandgap.c | 65 +++++------ 17 files changed, 430 insertions(+), 38 deletions(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi -- 2.38.0
WARNING: multiple messages have this Message-ID (diff)
From: Bryan Brattlof <bb@ti.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>, Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Keerthy <j-keerthy@ti.com>, Linux Thermal <linux-pm@vger.kernel.org>, Linux Device Tree <devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>, Linux ARM <linux-arm-kernel@lists.infradead.org>, Bryan Brattlof <bb@ti.com> Subject: [PATCH 00/11] enable VTM node of all TI's K3 SoCs Date: Tue, 11 Oct 2022 18:17:16 -0500 [thread overview] Message-ID: <20221011231727.8090-1-bb@ti.com> (raw) Hello Everyone! This series enables the VTM nodes for all of Texas Instruments K3 SoCs Most of this series updates the k3_j72xx_bandgap driver to conditionally map an eFuse region used by the j721e to work around an issue in its VTM implementation and allows us to save the SPARE_FUSE region on other SoCs We can then update the device tree bindings for the driver and finally define the VTM nodes for each device. Thanks for reviewing! ~Bryan Bryan Brattlof (11): thermal: k3_j72xx_bandgap: simplify k3_thermal_get_temp() function thermal: k3_j72xx_bandgap: use bool for i2128 erratum flag thermal: k3_j72xx_bandgap: remove fuse_base from structure thermal: k3_j72xx_bandgap: map fuse_base only for erratum workaround dt-bindings: thermal: k3-j72xx: elaborate on binding descriptions dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range arm64: dts: ti: k3-am64-main: add VTM node arm64: dts: ti: k3-am62-wakeup: add VTM node arm64: dts: ti: k3-j721e-mcu-wakeup: add VTM node arm64: dts: ti: k3-j721s2-mcu-wakeup: add VTM node arm64: dts: ti: k3-j7200-mcu-wakeup: add VTM node .../bindings/thermal/ti,j72xx-thermal.yaml | 51 ++++++++- arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi | 33 ++++++ arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-am62.dtsi | 7 +- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi | 33 ++++++ arch/arm64/boot/dts/ti/k3-am64.dtsi | 4 + .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi | 47 ++++++++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 3 + .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 ++ arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 75 +++++++++++++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 3 + .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 8 ++ arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi | 103 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721s2.dtsi | 3 + drivers/thermal/k3_j72xx_bandgap.c | 65 +++++------ 17 files changed, 430 insertions(+), 38 deletions(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi -- 2.38.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-10-11 23:18 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-10-11 23:17 Bryan Brattlof [this message] 2022-10-11 23:17 ` [PATCH 00/11] enable VTM node of all TI's K3 SoCs Bryan Brattlof 2022-10-11 23:17 ` [PATCH 01/11] thermal: k3_j72xx_bandgap: simplify k3_thermal_get_temp() function Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 02/11] thermal: k3_j72xx_bandgap: use bool for i2128 erratum flag Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 03/11] thermal: k3_j72xx_bandgap: remove fuse_base from structure Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 04/11] thermal: k3_j72xx_bandgap: map fuse_base only for erratum workaround Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 05/11] dt-bindings: thermal: k3-j72xx: elaborate on binding descriptions Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-12 13:36 ` Krzysztof Kozlowski 2022-10-12 13:36 ` Krzysztof Kozlowski 2022-10-12 18:19 ` Bryan Brattlof 2022-10-12 18:19 ` Bryan Brattlof 2022-10-13 23:30 ` Krzysztof Kozlowski 2022-10-13 23:30 ` Krzysztof Kozlowski 2022-10-11 23:17 ` [PATCH 06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-12 13:19 ` Rob Herring 2022-10-12 13:19 ` Rob Herring 2022-10-12 13:38 ` Krzysztof Kozlowski 2022-10-12 13:38 ` Krzysztof Kozlowski 2022-10-12 18:15 ` Bryan Brattlof 2022-10-12 18:15 ` Bryan Brattlof 2022-10-12 13:39 ` Krzysztof Kozlowski 2022-10-12 13:39 ` Krzysztof Kozlowski 2022-10-11 23:17 ` [PATCH 07/11] arm64: dts: ti: k3-am64-main: add VTM node Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 08/11] arm64: dts: ti: k3-am62-wakeup: " Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 09/11] arm64: dts: ti: k3-j721e-mcu-wakeup: " Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 10/11] arm64: dts: ti: k3-j721s2-mcu-wakeup: " Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof 2022-10-11 23:17 ` [PATCH 11/11] arm64: dts: ti: k3-j7200-mcu-wakeup: " Bryan Brattlof 2022-10-11 23:17 ` Bryan Brattlof
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221011231727.8090-1-bb@ti.com \ --to=bb@ti.com \ --cc=amitk@kernel.org \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=j-keerthy@ti.com \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=nm@ti.com \ --cc=rafael@kernel.org \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.