From: Shawn Guo <shawn.guo@linaro.org> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Jiri Slaby <jirislaby@kernel.org> Cc: Martin Kaiser <martin@kaiser.cx>, Pengutronix Kernel Team <kernel@pengutronix.de>, NXP Linux Team <linux-imx@nxp.com>, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Shawn Guo <shawn.guo@linaro.org> Subject: [PATCH] serial: imx: Add missing .thaw_noirq hook Date: Wed, 12 Oct 2022 20:13:53 +0800 [thread overview] Message-ID: <20221012121353.2346280-1-shawn.guo@linaro.org> (raw) The following warning is seen with non-console UART instance when system hibernates. [ 37.371969] ------------[ cut here ]------------ [ 37.376599] uart3_root_clk already disabled [ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0 ... [ 37.506986] Call trace: [ 37.509432] clk_core_disable+0xa4/0xb0 [ 37.513270] clk_disable+0x34/0x50 [ 37.516672] imx_uart_thaw+0x38/0x5c [ 37.520250] platform_pm_thaw+0x30/0x6c [ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4 [ 37.528972] device_resume+0x7c/0x160 [ 37.532633] dpm_resume+0xe8/0x230 [ 37.536036] hibernation_snapshot+0x288/0x430 [ 37.540397] hibernate+0x10c/0x2e0 [ 37.543798] state_store+0xc4/0xd0 [ 37.547203] kobj_attr_store+0x1c/0x30 [ 37.550953] sysfs_kf_write+0x48/0x60 [ 37.554619] kernfs_fop_write_iter+0x118/0x1ac [ 37.559063] new_sync_write+0xe8/0x184 [ 37.562812] vfs_write+0x230/0x290 [ 37.566214] ksys_write+0x68/0xf4 [ 37.569529] __arm64_sys_write+0x20/0x2c [ 37.573452] invoke_syscall.constprop.0+0x50/0xf0 [ 37.578156] do_el0_svc+0x11c/0x150 [ 37.581648] el0_svc+0x30/0x140 [ 37.584792] el0t_64_sync_handler+0xe8/0xf0 [ 37.588976] el0t_64_sync+0x1a0/0x1a4 [ 37.592639] ---[ end trace 56e22eec54676d75 ]--- On hibernating, pm core calls into related hooks in sequence like: .freeze .freeze_noirq .thaw_noirq .thaw With .thaw_noirq hook being absent, the clock will be disabled in a unbalanced call which results the warning above. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_thaw clk_disable_unprepare() Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have the call sequence corrected as below and thus fix the warning. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_resume_noirq() clk_enable() imx_uart_thaw clk_disable_unprepare() Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/tty/serial/imx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 590a25369531..e5163c2c4169 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2603,6 +2603,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = { .suspend_noirq = imx_uart_suspend_noirq, .resume_noirq = imx_uart_resume_noirq, .freeze_noirq = imx_uart_suspend_noirq, + .thaw_noirq = imx_uart_resume_noirq, .restore_noirq = imx_uart_resume_noirq, .suspend = imx_uart_suspend, .resume = imx_uart_resume, -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawn.guo@linaro.org> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Jiri Slaby <jirislaby@kernel.org> Cc: Martin Kaiser <martin@kaiser.cx>, Pengutronix Kernel Team <kernel@pengutronix.de>, NXP Linux Team <linux-imx@nxp.com>, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Shawn Guo <shawn.guo@linaro.org> Subject: [PATCH] serial: imx: Add missing .thaw_noirq hook Date: Wed, 12 Oct 2022 20:13:53 +0800 [thread overview] Message-ID: <20221012121353.2346280-1-shawn.guo@linaro.org> (raw) The following warning is seen with non-console UART instance when system hibernates. [ 37.371969] ------------[ cut here ]------------ [ 37.376599] uart3_root_clk already disabled [ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0 ... [ 37.506986] Call trace: [ 37.509432] clk_core_disable+0xa4/0xb0 [ 37.513270] clk_disable+0x34/0x50 [ 37.516672] imx_uart_thaw+0x38/0x5c [ 37.520250] platform_pm_thaw+0x30/0x6c [ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4 [ 37.528972] device_resume+0x7c/0x160 [ 37.532633] dpm_resume+0xe8/0x230 [ 37.536036] hibernation_snapshot+0x288/0x430 [ 37.540397] hibernate+0x10c/0x2e0 [ 37.543798] state_store+0xc4/0xd0 [ 37.547203] kobj_attr_store+0x1c/0x30 [ 37.550953] sysfs_kf_write+0x48/0x60 [ 37.554619] kernfs_fop_write_iter+0x118/0x1ac [ 37.559063] new_sync_write+0xe8/0x184 [ 37.562812] vfs_write+0x230/0x290 [ 37.566214] ksys_write+0x68/0xf4 [ 37.569529] __arm64_sys_write+0x20/0x2c [ 37.573452] invoke_syscall.constprop.0+0x50/0xf0 [ 37.578156] do_el0_svc+0x11c/0x150 [ 37.581648] el0_svc+0x30/0x140 [ 37.584792] el0t_64_sync_handler+0xe8/0xf0 [ 37.588976] el0t_64_sync+0x1a0/0x1a4 [ 37.592639] ---[ end trace 56e22eec54676d75 ]--- On hibernating, pm core calls into related hooks in sequence like: .freeze .freeze_noirq .thaw_noirq .thaw With .thaw_noirq hook being absent, the clock will be disabled in a unbalanced call which results the warning above. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_thaw clk_disable_unprepare() Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have the call sequence corrected as below and thus fix the warning. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_resume_noirq() clk_enable() imx_uart_thaw clk_disable_unprepare() Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/tty/serial/imx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 590a25369531..e5163c2c4169 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2603,6 +2603,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = { .suspend_noirq = imx_uart_suspend_noirq, .resume_noirq = imx_uart_resume_noirq, .freeze_noirq = imx_uart_suspend_noirq, + .thaw_noirq = imx_uart_resume_noirq, .restore_noirq = imx_uart_resume_noirq, .suspend = imx_uart_suspend, .resume = imx_uart_resume, -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-10-12 12:14 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-10-12 12:13 Shawn Guo [this message] 2022-10-12 12:13 ` [PATCH] serial: imx: Add missing .thaw_noirq hook Shawn Guo 2022-10-12 15:49 ` Martin Kaiser 2022-10-12 15:49 ` Martin Kaiser 2022-10-12 16:20 ` Greg Kroah-Hartman 2022-10-12 16:20 ` Greg Kroah-Hartman 2022-10-13 1:31 ` Shawn Guo 2022-10-13 1:31 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221012121353.2346280-1-shawn.guo@linaro.org \ --to=shawn.guo@linaro.org \ --cc=gregkh@linuxfoundation.org \ --cc=jirislaby@kernel.org \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=martin@kaiser.cx \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.