From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> To: matthias.bgg@gmail.com Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, sam.shih@mediatek.com, hanks.chen@mediatek.com, weiyi.lu@mediatek.com, zhiyong.tao@mediatek.com, andrew-sh.cheng@mediatek.com, viresh.kumar@linaro.org, chunfeng.yun@mediatek.com, fparent@baylibre.com, mars.cheng@mediatek.com, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Subject: [PATCH 3/8] arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators Date: Thu, 13 Oct 2022 17:22:07 +0200 [thread overview] Message-ID: <20221013152212.416661-4-angelogioacchino.delregno@collabora.com> (raw) In-Reply-To: <20221013152212.416661-1-angelogioacchino.delregno@collabora.com> Rename the fixed-clock oscillators to remove the unit address. This solves unit_address_vs_reg warnings. Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index e6d7453e56e0..ff6b26cdda81 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -160,70 +160,70 @@ sys_clk: dummyclk { #clock-cells = <0>; }; - clk26m: oscillator@0 { + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; clock-output-names = "clk26m"; }; - clk32k: oscillator@1 { + clk32k: oscillator-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "clk32k"; }; - clkfpc: oscillator@2 { + clkfpc: oscillator-50m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; clock-output-names = "clkfpc"; }; - clkaud_ext_i_0: oscillator@3 { + clkaud_ext_i_0: oscillator-aud0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <6500000>; clock-output-names = "clkaud_ext_i_0"; }; - clkaud_ext_i_1: oscillator@4 { + clkaud_ext_i_1: oscillator-aud1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <196608000>; clock-output-names = "clkaud_ext_i_1"; }; - clkaud_ext_i_2: oscillator@5 { + clkaud_ext_i_2: oscillator-aud2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <180633600>; clock-output-names = "clkaud_ext_i_2"; }; - clki2si0_mck_i: oscillator@6 { + clki2si0_mck_i: oscillator-i2s0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si0_mck_i"; }; - clki2si1_mck_i: oscillator@7 { + clki2si1_mck_i: oscillator-i2s1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si1_mck_i"; }; - clki2si2_mck_i: oscillator@8 { + clki2si2_mck_i: oscillator-i2s2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si2_mck_i"; }; - clktdmin_mclk_i: oscillator@9 { + clktdmin_mclk_i: oscillator-mclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; -- 2.37.2
WARNING: multiple messages have this Message-ID (diff)
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> To: matthias.bgg@gmail.com Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, sam.shih@mediatek.com, hanks.chen@mediatek.com, weiyi.lu@mediatek.com, zhiyong.tao@mediatek.com, andrew-sh.cheng@mediatek.com, viresh.kumar@linaro.org, chunfeng.yun@mediatek.com, fparent@baylibre.com, mars.cheng@mediatek.com, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Subject: [PATCH 3/8] arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators Date: Thu, 13 Oct 2022 17:22:07 +0200 [thread overview] Message-ID: <20221013152212.416661-4-angelogioacchino.delregno@collabora.com> (raw) In-Reply-To: <20221013152212.416661-1-angelogioacchino.delregno@collabora.com> Rename the fixed-clock oscillators to remove the unit address. This solves unit_address_vs_reg warnings. Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index e6d7453e56e0..ff6b26cdda81 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -160,70 +160,70 @@ sys_clk: dummyclk { #clock-cells = <0>; }; - clk26m: oscillator@0 { + clk26m: oscillator-26m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; clock-output-names = "clk26m"; }; - clk32k: oscillator@1 { + clk32k: oscillator-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "clk32k"; }; - clkfpc: oscillator@2 { + clkfpc: oscillator-50m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; clock-output-names = "clkfpc"; }; - clkaud_ext_i_0: oscillator@3 { + clkaud_ext_i_0: oscillator-aud0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <6500000>; clock-output-names = "clkaud_ext_i_0"; }; - clkaud_ext_i_1: oscillator@4 { + clkaud_ext_i_1: oscillator-aud1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <196608000>; clock-output-names = "clkaud_ext_i_1"; }; - clkaud_ext_i_2: oscillator@5 { + clkaud_ext_i_2: oscillator-aud2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <180633600>; clock-output-names = "clkaud_ext_i_2"; }; - clki2si0_mck_i: oscillator@6 { + clki2si0_mck_i: oscillator-i2s0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si0_mck_i"; }; - clki2si1_mck_i: oscillator@7 { + clki2si1_mck_i: oscillator-i2s1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si1_mck_i"; }; - clki2si2_mck_i: oscillator@8 { + clki2si2_mck_i: oscillator-i2s2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; clock-output-names = "clki2si2_mck_i"; }; - clktdmin_mclk_i: oscillator@9 { + clktdmin_mclk_i: oscillator-mclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <30000000>; -- 2.37.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-13 15:22 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-10-13 15:22 [PATCH 0/8] ARM64 MediaTek devicetree fixes - Part 1 AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-10-13 15:22 ` [PATCH 1/8] arm64: dts: mt7896a: Fix unit_address_vs_reg warning for oscillator AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-10-13 15:22 ` [PATCH 2/8] arm64: dts: mt6779: Fix devicetree build warnings AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno [this message] 2022-10-13 15:22 ` [PATCH 3/8] arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators AngeloGioacchino Del Regno 2022-10-13 15:22 ` [PATCH 4/8] arm64: dts: mt2712e: Fix unit address for pinctrl node AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-10-13 15:22 ` [PATCH 5/8] arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-10-13 15:22 ` [PATCH 6/8] arm64: dts: mt2712-evb: Fix usb vbus " AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-10-14 2:43 ` Chunfeng Yun 2022-10-14 2:43 ` Chunfeng Yun 2022-10-14 7:35 ` AngeloGioacchino Del Regno 2022-10-14 7:35 ` AngeloGioacchino Del Regno 2022-10-21 6:25 ` Chunfeng Yun 2022-10-21 6:25 ` Chunfeng Yun 2022-10-21 8:13 ` AngeloGioacchino Del Regno 2022-10-21 8:13 ` AngeloGioacchino Del Regno 2022-10-13 15:22 ` [PATCH 7/8] arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-10-13 15:22 ` [PATCH 8/8] arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name AngeloGioacchino Del Regno 2022-10-13 15:22 ` AngeloGioacchino Del Regno 2022-11-21 12:03 ` [PATCH 0/8] ARM64 MediaTek devicetree fixes - Part 1 Matthias Brugger 2022-11-21 12:03 ` Matthias Brugger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221013152212.416661-4-angelogioacchino.delregno@collabora.com \ --to=angelogioacchino.delregno@collabora.com \ --cc=andrew-sh.cheng@mediatek.com \ --cc=chunfeng.yun@mediatek.com \ --cc=devicetree@vger.kernel.org \ --cc=fparent@baylibre.com \ --cc=hanks.chen@mediatek.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=mars.cheng@mediatek.com \ --cc=matthias.bgg@gmail.com \ --cc=robh+dt@kernel.org \ --cc=sam.shih@mediatek.com \ --cc=viresh.kumar@linaro.org \ --cc=weiyi.lu@mediatek.com \ --cc=zhiyong.tao@mediatek.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.