From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
To: jic23@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, wens@csie.org,
lee.jones@linaro.org, sre@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org
Cc: lars@metafoo.de, andy.shevchenko@gmail.com,
linus.walleij@linaro.org, brgl@bgdev.pl, michael@walle.cc,
samuel@sholland.org, linux-iio@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v6 05/13] mfd: axp20x: Add support for AXP192
Date: Mon, 17 Oct 2022 00:43:27 +0100 [thread overview]
Message-ID: <20221016234335.904212-6-aidanmacdonald.0x0@gmail.com> (raw)
In-Reply-To: <20221016234335.904212-1-aidanmacdonald.0x0@gmail.com>
The AXP192 PMIC is similar to the AXP202/AXP209, but with different
regulators, additional GPIOs, and a different IRQ register layout.
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
drivers/mfd/axp20x-i2c.c | 2 +
drivers/mfd/axp20x.c | 141 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 84 ++++++++++++++++++++++
3 files changed, 227 insertions(+)
diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index 8fd6727dc30a..88d816adc69b 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -60,6 +60,7 @@ static void axp20x_i2c_remove(struct i2c_client *i2c)
#ifdef CONFIG_OF
static const struct of_device_id axp20x_i2c_of_match[] = {
{ .compatible = "x-powers,axp152", .data = (void *)AXP152_ID },
+ { .compatible = "x-powers,axp192", .data = (void *)AXP192_ID },
{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
@@ -73,6 +74,7 @@ MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
static const struct i2c_device_id axp20x_i2c_id[] = {
{ "axp152", 0 },
+ { "axp192", 0 },
{ "axp202", 0 },
{ "axp209", 0 },
{ "axp221", 0 },
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 88a212a8168c..7d2949209d77 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -34,6 +34,7 @@
static const char * const axp20x_model_names[] = {
"AXP152",
+ "AXP192",
"AXP202",
"AXP209",
"AXP221",
@@ -92,6 +93,35 @@ static const struct regmap_access_table axp20x_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+static const struct regmap_range axp192_writeable_ranges[] = {
+ regmap_reg_range(AXP192_DATACACHE(0), AXP192_DATACACHE(5)),
+ regmap_reg_range(AXP192_PWR_OUT_CTRL, AXP192_IRQ5_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP192_N_RSTO_CTRL),
+ regmap_reg_range(AXP20X_CC_CTRL, AXP20X_CC_CTRL),
+};
+
+static const struct regmap_range axp192_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP192_USB_OTG_STATUS),
+ regmap_reg_range(AXP192_IRQ1_STATE, AXP192_IRQ4_STATE),
+ regmap_reg_range(AXP192_IRQ5_STATE, AXP192_IRQ5_STATE),
+ regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
+ regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
+ regmap_reg_range(AXP192_GPIO2_0_STATE, AXP192_GPIO2_0_STATE),
+ regmap_reg_range(AXP192_GPIO4_3_STATE, AXP192_GPIO4_3_STATE),
+ regmap_reg_range(AXP192_N_RSTO_CTRL, AXP192_N_RSTO_CTRL),
+ regmap_reg_range(AXP20X_CHRG_CC_31_24, AXP20X_CC_CTRL),
+};
+
+static const struct regmap_access_table axp192_writeable_table = {
+ .yes_ranges = axp192_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp192_writeable_ranges),
+};
+
+static const struct regmap_access_table axp192_volatile_table = {
+ .yes_ranges = axp192_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp192_volatile_ranges),
+};
+
/* AXP22x ranges are shared with the AXP809, as they cover the same range */
static const struct regmap_range axp22x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
@@ -173,6 +203,19 @@ static const struct resource axp152_pek_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
};
+static const struct resource axp192_ac_power_supply_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
+};
+
+static const struct resource axp192_usb_power_supply_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_VALID, "VBUS_VALID"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
+};
+
static const struct resource axp20x_ac_power_supply_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
@@ -245,6 +288,15 @@ static const struct regmap_config axp152_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_config axp192_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp192_writeable_table,
+ .volatile_table = &axp192_volatile_table,
+ .max_register = AXP20X_CC_CTRL,
+ .cache_type = REGCACHE_RBTREE,
+};
+
static const struct regmap_config axp20x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -304,6 +356,42 @@ static const struct regmap_irq axp152_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0),
};
+static const struct regmap_irq axp192_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP192, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP192, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP192, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP192, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP192, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP192, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP192, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP192, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP192, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP192, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP192, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP192, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP192, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP192, BATT_TEMP_HIGH, 1, 1),
+ INIT_REGMAP_IRQ(AXP192, BATT_TEMP_LOW, 1, 0),
+ INIT_REGMAP_IRQ(AXP192, DIE_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP192, CHARG_I_LOW, 2, 6),
+ INIT_REGMAP_IRQ(AXP192, DCDC1_V_LONG, 2, 5),
+ INIT_REGMAP_IRQ(AXP192, DCDC2_V_LONG, 2, 4),
+ INIT_REGMAP_IRQ(AXP192, DCDC3_V_LONG, 2, 3),
+ INIT_REGMAP_IRQ(AXP192, PEK_SHORT, 2, 1),
+ INIT_REGMAP_IRQ(AXP192, PEK_LONG, 2, 0),
+ INIT_REGMAP_IRQ(AXP192, N_OE_PWR_ON, 3, 7),
+ INIT_REGMAP_IRQ(AXP192, N_OE_PWR_OFF, 3, 6),
+ INIT_REGMAP_IRQ(AXP192, VBUS_VALID, 3, 5),
+ INIT_REGMAP_IRQ(AXP192, VBUS_NOT_VALID, 3, 4),
+ INIT_REGMAP_IRQ(AXP192, VBUS_SESS_VALID, 3, 3),
+ INIT_REGMAP_IRQ(AXP192, VBUS_SESS_END, 3, 2),
+ INIT_REGMAP_IRQ(AXP192, LOW_PWR_LVL, 3, 0),
+ INIT_REGMAP_IRQ(AXP192, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP192, GPIO2_INPUT, 4, 2),
+ INIT_REGMAP_IRQ(AXP192, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP192, GPIO0_INPUT, 4, 0),
+};
+
static const struct regmap_irq axp20x_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
@@ -514,6 +602,32 @@ static const struct regmap_irq_chip axp152_regmap_irq_chip = {
.num_regs = 3,
};
+static unsigned int axp192_get_irq_reg(struct regmap_irq_chip_data *data,
+ unsigned int base, int index)
+{
+ /* linear mapping for IRQ1 to IRQ4 */
+ if (index < 4)
+ return base + index;
+
+ /* handle IRQ5 separately */
+ if (base == AXP192_IRQ1_EN)
+ return AXP192_IRQ5_EN;
+
+ return AXP192_IRQ5_STATE;
+}
+
+static const struct regmap_irq_chip axp192_regmap_irq_chip = {
+ .name = "axp192_irq_chip",
+ .status_base = AXP192_IRQ1_STATE,
+ .ack_base = AXP192_IRQ1_STATE,
+ .unmask_base = AXP192_IRQ1_EN,
+ .init_ack_masked = true,
+ .irqs = axp192_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp192_regmap_irqs),
+ .num_regs = 5,
+ .get_irq_reg = axp192_get_irq_reg,
+};
+
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
.name = "axp20x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
@@ -588,6 +702,27 @@ static const struct regmap_irq_chip axp809_regmap_irq_chip = {
.num_regs = 5,
};
+static const struct mfd_cell axp192_cells[] = {
+ {
+ .name = "axp192-adc",
+ .of_compatible = "x-powers,axp192-adc",
+ }, {
+ .name = "axp20x-battery-power-supply",
+ .of_compatible = "x-powers,axp192-battery-power-supply",
+ }, {
+ .name = "axp20x-ac-power-supply",
+ .of_compatible = "x-powers,axp202-ac-power-supply",
+ .num_resources = ARRAY_SIZE(axp192_ac_power_supply_resources),
+ .resources = axp192_ac_power_supply_resources,
+ }, {
+ .name = "axp20x-usb-power-supply",
+ .of_compatible = "x-powers,axp192-usb-power-supply",
+ .num_resources = ARRAY_SIZE(axp192_usb_power_supply_resources),
+ .resources = axp192_usb_power_supply_resources,
+ },
+ { .name = "axp20x-regulator" },
+};
+
static const struct mfd_cell axp20x_cells[] = {
{
.name = "axp20x-gpio",
@@ -874,6 +1009,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_cfg = &axp152_regmap_config;
axp20x->regmap_irq_chip = &axp152_regmap_irq_chip;
break;
+ case AXP192_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp192_cells);
+ axp20x->cells = axp192_cells;
+ axp20x->regmap_cfg = &axp192_regmap_config;
+ axp20x->regmap_irq_chip = &axp192_regmap_irq_chip;
+ break;
case AXP202_ID:
case AXP209_ID:
axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 9ab0e2fca7ea..c9a9ee8ec246 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -12,6 +12,7 @@
enum axp20x_variants {
AXP152_ID = 0,
+ AXP192_ID,
AXP202_ID,
AXP209_ID,
AXP221_ID,
@@ -24,6 +25,7 @@ enum axp20x_variants {
NR_AXP20X_VARIANTS,
};
+#define AXP192_DATACACHE(m) (0x06 + (m))
#define AXP20X_DATACACHE(m) (0x04 + (m))
/* Power supply */
@@ -45,6 +47,13 @@ enum axp20x_variants {
#define AXP152_DCDC_FREQ 0x37
#define AXP152_DCDC_MODE 0x80
+#define AXP192_USB_OTG_STATUS 0x04
+#define AXP192_PWR_OUT_CTRL 0x12
+#define AXP192_DCDC2_V_OUT 0x23
+#define AXP192_DCDC1_V_OUT 0x26
+#define AXP192_DCDC3_V_OUT 0x27
+#define AXP192_LDO2_3_V_OUT 0x28
+
#define AXP20X_PWR_INPUT_STATUS 0x00
#define AXP20X_PWR_OP_MODE 0x01
#define AXP20X_USB_OTG_STATUS 0x02
@@ -139,6 +148,17 @@ enum axp20x_variants {
#define AXP152_IRQ2_STATE 0x49
#define AXP152_IRQ3_STATE 0x4a
+#define AXP192_IRQ1_EN 0x40
+#define AXP192_IRQ2_EN 0x41
+#define AXP192_IRQ3_EN 0x42
+#define AXP192_IRQ4_EN 0x43
+#define AXP192_IRQ1_STATE 0x44
+#define AXP192_IRQ2_STATE 0x45
+#define AXP192_IRQ3_STATE 0x46
+#define AXP192_IRQ4_STATE 0x47
+#define AXP192_IRQ5_EN 0x4a
+#define AXP192_IRQ5_STATE 0x4d
+
#define AXP20X_IRQ1_EN 0x40
#define AXP20X_IRQ2_EN 0x41
#define AXP20X_IRQ3_EN 0x42
@@ -153,6 +173,11 @@ enum axp20x_variants {
#define AXP20X_IRQ6_STATE 0x4d
/* ADC */
+#define AXP192_GPIO2_V_ADC_H 0x68
+#define AXP192_GPIO2_V_ADC_L 0x69
+#define AXP192_GPIO3_V_ADC_H 0x6a
+#define AXP192_GPIO3_V_ADC_L 0x6b
+
#define AXP20X_ACIN_V_ADC_H 0x56
#define AXP20X_ACIN_V_ADC_L 0x57
#define AXP20X_ACIN_I_ADC_H 0x58
@@ -182,6 +207,8 @@ enum axp20x_variants {
#define AXP20X_IPSOUT_V_HIGH_L 0x7f
/* Power supply */
+#define AXP192_GPIO30_IN_RANGE 0x85
+
#define AXP20X_DCDC_MODE 0x80
#define AXP20X_ADC_EN1 0x82
#define AXP20X_ADC_EN2 0x83
@@ -210,6 +237,16 @@ enum axp20x_variants {
#define AXP152_PWM1_FREQ_Y 0x9c
#define AXP152_PWM1_DUTY_CYCLE 0x9d
+#define AXP192_GPIO0_CTRL 0x90
+#define AXP192_LDO_IO0_V_OUT 0x91
+#define AXP192_GPIO1_CTRL 0x92
+#define AXP192_GPIO2_CTRL 0x93
+#define AXP192_GPIO2_0_STATE 0x94
+#define AXP192_GPIO4_3_CTRL 0x95
+#define AXP192_GPIO4_3_STATE 0x96
+#define AXP192_GPIO2_0_PULL 0x97
+#define AXP192_N_RSTO_CTRL 0x9e
+
#define AXP20X_GPIO0_CTRL 0x90
#define AXP20X_LDO5_V_OUT 0x91
#define AXP20X_GPIO1_CTRL 0x92
@@ -287,6 +324,17 @@ enum axp20x_variants {
#define AXP288_FG_TUNE5 0xed
/* Regulators IDs */
+enum {
+ AXP192_DCDC1 = 0,
+ AXP192_DCDC2,
+ AXP192_DCDC3,
+ AXP192_LDO1,
+ AXP192_LDO2,
+ AXP192_LDO3,
+ AXP192_LDO_IO0,
+ AXP192_REG_ID_MAX
+};
+
enum {
AXP20X_LDO1 = 0,
AXP20X_LDO2,
@@ -440,6 +488,42 @@ enum {
AXP152_IRQ_GPIO0_INPUT,
};
+enum axp192_irqs {
+ AXP192_IRQ_ACIN_OVER_V = 1,
+ AXP192_IRQ_ACIN_PLUGIN,
+ AXP192_IRQ_ACIN_REMOVAL,
+ AXP192_IRQ_VBUS_OVER_V,
+ AXP192_IRQ_VBUS_PLUGIN,
+ AXP192_IRQ_VBUS_REMOVAL,
+ AXP192_IRQ_VBUS_V_LOW,
+ AXP192_IRQ_BATT_PLUGIN,
+ AXP192_IRQ_BATT_REMOVAL,
+ AXP192_IRQ_BATT_ENT_ACT_MODE,
+ AXP192_IRQ_BATT_EXIT_ACT_MODE,
+ AXP192_IRQ_CHARG,
+ AXP192_IRQ_CHARG_DONE,
+ AXP192_IRQ_BATT_TEMP_HIGH,
+ AXP192_IRQ_BATT_TEMP_LOW,
+ AXP192_IRQ_DIE_TEMP_HIGH,
+ AXP192_IRQ_CHARG_I_LOW,
+ AXP192_IRQ_DCDC1_V_LONG,
+ AXP192_IRQ_DCDC2_V_LONG,
+ AXP192_IRQ_DCDC3_V_LONG,
+ AXP192_IRQ_PEK_SHORT = 22,
+ AXP192_IRQ_PEK_LONG,
+ AXP192_IRQ_N_OE_PWR_ON,
+ AXP192_IRQ_N_OE_PWR_OFF,
+ AXP192_IRQ_VBUS_VALID,
+ AXP192_IRQ_VBUS_NOT_VALID,
+ AXP192_IRQ_VBUS_SESS_VALID,
+ AXP192_IRQ_VBUS_SESS_END,
+ AXP192_IRQ_LOW_PWR_LVL = 31,
+ AXP192_IRQ_TIMER,
+ AXP192_IRQ_GPIO2_INPUT = 37,
+ AXP192_IRQ_GPIO1_INPUT,
+ AXP192_IRQ_GPIO0_INPUT,
+};
+
enum {
AXP20X_IRQ_ACIN_OVER_V = 1,
AXP20X_IRQ_ACIN_PLUGIN,
--
2.38.0
next prev parent reply other threads:[~2022-10-16 23:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-16 23:43 [PATCH v6 00/13] Add support for AXP192 PMIC Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 01/13] dt-bindings: mfd: add bindings for AXP192 MFD device Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 02/13] dt-bindings: iio: adc: axp209: Add AXP192 compatible Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 03/13] dt-bindings: power: supply: axp20x: " Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 04/13] dt-bindings: power: axp20x-battery: " Aidan MacDonald
2022-10-16 23:43 ` Aidan MacDonald [this message]
2022-10-16 23:43 ` [PATCH v6 06/13] regulator: axp20x: Add support for AXP192 Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 07/13] iio: adc: axp20x_adc: Minor code cleanups Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 08/13] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 09/13] iio: adc: axp20x_adc: Add support for AXP192 Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 10/13] power: supply: axp20x_usb_power: " Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 11/13] power: axp20x_battery: Add constant charge current table Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 12/13] power: axp20x_battery: Support battery status without fuel gauge Aidan MacDonald
2022-10-16 23:43 ` [PATCH v6 13/13] power: axp20x_battery: Add support for AXP192 Aidan MacDonald
2022-10-16 23:48 ` [PATCH v6 00/13] Add support for AXP192 PMIC Aidan MacDonald
2022-10-17 17:44 ` Jonathan Cameron
2022-10-17 22:21 ` Aidan MacDonald
2022-10-18 12:18 ` Andy Shevchenko
2022-10-18 15:15 ` Aidan MacDonald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221016234335.904212-6-aidanmacdonald.0x0@gmail.com \
--to=aidanmacdonald.0x0@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=michael@walle.cc \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=sre@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.