All of lore.kernel.org
 help / color / mirror / Atom feed
From: Quentin Schulz <foss+uboot@0leil.net>
To: Simon Glass <sjg@chromium.org>,
	Philipp Tomsich <philipp.tomsich@vrull.eu>,
	Heiko Stuebner <heiko@sntech.de>,
	Klaus Goger <klaus.goger@theobroma-systems.com>
Cc: Quentin Schulz <quentin.schulz@theobroma-systems.com>,
	Quentin Schulz <foss+uboot@0leil.net>,
	Kever Yang <kever.yang@rock-chips.com>,
	u-boot@lists.denx.de
Subject: [PATCH v4 0/5] add support for Theobroma Systems PX30-µQ7 (Ringneck) with Haikou devkit
Date: Tue, 29 Nov 2022 13:19:40 +0100	[thread overview]
Message-ID: <20221017-upstream-ringneck-v4-0-5e0a3f119047@theobroma-systems.com> (raw)

From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

The PX30-uQ7 (Ringneck) SoM is a µQseven-compatible (40mmx70mm, MXM-230
connector) system-on-module from Theobroma Systems[1], featuring the
Rockchip PX30.

It provides the following feature set:
* up to 4GB DDR4
* up to 128GB on-module eMMC (with 8-bit 1.8V interface)
* SD card (on a baseboard) via edge connector
* Fast Ethernet with on-module TI DP83825I PHY
* MIPI-DSI/LVDS
* MIPI-CSI
* USB
  - 1x USB 2.0 dual-role
  - 3x USB 2.0 host
* on-module companion controller (STM32 Cortex-M0 or ATtiny), implementing:
  - low-power RTC functionality (ISL1208 emulation)
  - fan controller (AMC6821 emulation)
  - USB<->CAN bridge controller (STM32 only)
* on-module Espressif ESP32 for Bluetooth + 2.4GHz WiFi
* on-module NXP SE05x Secure Element

[1] https://www.theobroma-systems.com/som-product/px30-uq7/

Cheers,
Quentin

To: Heiko Stuebner <heiko@sntech.de>
To: Simon Glass <sjg@chromium.org>
To: Philipp Tomsich <philipp.tomsich@vrull.eu>
To: Klaus Goger <klaus.goger@theobroma-systems.com>
Cc: Quentin Schulz <foss+uboot@0leil.net>
Cc: u-boot@lists.denx.de
Cc: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
---
Changes in v4:
- added CONFIG_ENV_OVERWRITE to defconfig to match Puma behavior and allow
  commands specified in our user manual,
- added comment in commit log for the DTS origin (next-20221114),
- Link to v3: https://lore.kernel.org/r/20221017-upstream-ringneck-v3-0-d6ae387f35ef@theobroma-systems.com

Changes in v3:
- added Rb,
- rebased on top of master,
- fixed http links to use u instead of encoded µ,
- updated u-boot,mmc-env-offset from 16KB to 20KB to avoid GPT corruption when
  saving env + reduced env size to 0x3000 to adapt to the offset change,
- removed video support from defconfig as there's no display support ATM,
- Link to v2: https://lore.kernel.org/r/20221017-upstream-ringneck-v2-0-0f03912ebac2@theobroma-systems.com

Changes in v2:
 - updated DTS from Linux with v2 of the Linux kernel patch series,
 - updated node nade for bios-disable-override-hog to match v2 of Linux kernel,
 - removed uapi input patch since it is not needed anymore,

---
Quentin Schulz (5):
      rockchip: px30: fix CONFIG_IRAM_BASE
      rockchip: px30: list possible SPL boot devices
      rockchip: px30: insert u-boot,spl-boot-device into U-Boot device tree
      arm64: dts: rockchip: sync px30 DTSI with Linux kernel next-20221114
      rockchip: add support for PX30 Ringneck SoM on Haikou Devkit

 arch/arm/dts/px30-ringneck-haikou-u-boot.dtsi      |  91 +++++
 arch/arm/dts/px30-ringneck-haikou.dts              | 232 +++++++++++++
 arch/arm/dts/px30-ringneck.dtsi                    | 382 +++++++++++++++++++++
 arch/arm/dts/px30.dtsi                             |  28 +-
 arch/arm/mach-rockchip/px30/Kconfig                |  25 ++
 arch/arm/mach-rockchip/px30/px30.c                 |  56 +++
 board/theobroma-systems/ringneck_px30/Kconfig      |  18 +
 board/theobroma-systems/ringneck_px30/MAINTAINERS  |   9 +
 board/theobroma-systems/ringneck_px30/Makefile     |   7 +
 board/theobroma-systems/ringneck_px30/README       |  69 ++++
 .../ringneck_px30/ringneck-px30.c                  | 175 ++++++++++
 configs/ringneck-px30_defconfig                    | 128 +++++++
 doc/board/rockchip/rockchip.rst                    |   1 +
 include/configs/px30_common.h                      |   3 +-
 include/configs/ringneck_px30.h                    |  15 +
 15 files changed, 1234 insertions(+), 5 deletions(-)
---
base-commit: 39b81955d38c11254b455322b9d98e07010049d6
change-id: 20221017-upstream-ringneck-57abd09a7aaa

Best regards,
-- 
Quentin Schulz <quentin.schulz@theobroma-systems.com>

             reply	other threads:[~2022-11-29 12:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-29 12:19 Quentin Schulz [this message]
2022-11-29 12:19 ` [PATCH v4 1/5] rockchip: px30: fix CONFIG_IRAM_BASE Quentin Schulz
2022-11-29 12:19 ` [PATCH v4 2/5] rockchip: px30: list possible SPL boot devices Quentin Schulz
2022-11-29 12:19 ` [PATCH v4 3/5] rockchip: px30: insert u-boot, spl-boot-device into U-Boot device tree Quentin Schulz
2022-12-18 10:14   ` Kever Yang
2022-12-19  7:12   ` Kever Yang
2022-11-29 12:19 ` [PATCH v4 4/5] arm64: dts: rockchip: sync px30 DTSI with Linux kernel next-20221114 Quentin Schulz
2022-11-29 12:19 ` [PATCH v4 5/5] rockchip: add support for PX30 Ringneck SoM on Haikou Devkit Quentin Schulz
2022-12-18 10:15   ` Kever Yang
2022-12-20  1:56   ` Kever Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221017-upstream-ringneck-v4-0-5e0a3f119047@theobroma-systems.com \
    --to=foss+uboot@0leil.net \
    --cc=heiko@sntech.de \
    --cc=kever.yang@rock-chips.com \
    --cc=klaus.goger@theobroma-systems.com \
    --cc=philipp.tomsich@vrull.eu \
    --cc=quentin.schulz@theobroma-systems.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.