From: Christian Marangi <ansuelsmth@gmail.com> To: Russell King <linux@armlinux.org.uk>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Arnd Bergmann <arnd@arndb.de>, Ard Biesheuvel <ardb@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>, Geert Uytterhoeven <geert+renesas@glider.be>, Nick Hawkins <nick.hawkins@hpe.com>, John Crispin <john@phrozen.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Christian Marangi <ansuelsmth@gmail.com> Subject: [PATCH] ARM: mach-qcom: fix support for ipq806x Date: Fri, 21 Oct 2022 20:10:16 +0200 [thread overview] Message-ID: <20221021181016.14740-1-ansuelsmth@gmail.com> (raw) Add a specific config flag for Qcom IPQ806x as this SoC can't use AUTO_ZRELADDR and require the PHYS_OFFSET set to 0x42000000. This is needed as some legacy board (or some wrongly configured bootloader) pass the wrong memory map and doesn't exclude the first ~20MB of RAM reserved for the hardware network accellerators. With this change we can correctly support each board and prevent any kind of misconfiguration done by the OEM. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- arch/arm/Kconfig | 3 ++- arch/arm/mach-qcom/Kconfig | 13 +++++++++++++ 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1af63e17b4ad..0818d35973ad 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -282,6 +282,7 @@ config PHYS_OFFSET default 0x30000000 if ARCH_S3C24XX default 0xa0000000 if ARCH_IOP32X || ARCH_PXA default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100 + default 0x42000000 if ARCH_IPQ806X default 0 help Please provide the physical address corresponding to the @@ -1701,7 +1702,7 @@ config CRASH_DUMP config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM - default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100 || ARCH_IPQ806X) help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 12a812e61c16..b11b6e391ff0 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -46,4 +46,17 @@ config ARCH_MDM9615 bool "Enable support for MDM9615" select CLKSRC_QCOM +config ARCH_IPQ806X + bool "Enable support for IPQ806x" + help + Enable support for the Qualcomm IPQ806x. + + IPQ806x require special PHYS_OFFSET and can't use AUTO_ZRELADDR. + The first ~20MB of RAM is reserved for the hardware network accelerators, + and the bootloader removes this section from the layout passed from the + ATAGS (when used by some bootloader doesn't even do that). + + To support every system and handle legacy systems, hardcode PHYS_OFFSET and + disable AUTO_ZRELADDR. + endif -- 2.37.2
WARNING: multiple messages have this Message-ID (diff)
From: Christian Marangi <ansuelsmth@gmail.com> To: Russell King <linux@armlinux.org.uk>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Arnd Bergmann <arnd@arndb.de>, Ard Biesheuvel <ardb@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>, Geert Uytterhoeven <geert+renesas@glider.be>, Nick Hawkins <nick.hawkins@hpe.com>, John Crispin <john@phrozen.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Christian Marangi <ansuelsmth@gmail.com> Subject: [PATCH] ARM: mach-qcom: fix support for ipq806x Date: Fri, 21 Oct 2022 20:10:16 +0200 [thread overview] Message-ID: <20221021181016.14740-1-ansuelsmth@gmail.com> (raw) Add a specific config flag for Qcom IPQ806x as this SoC can't use AUTO_ZRELADDR and require the PHYS_OFFSET set to 0x42000000. This is needed as some legacy board (or some wrongly configured bootloader) pass the wrong memory map and doesn't exclude the first ~20MB of RAM reserved for the hardware network accellerators. With this change we can correctly support each board and prevent any kind of misconfiguration done by the OEM. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- arch/arm/Kconfig | 3 ++- arch/arm/mach-qcom/Kconfig | 13 +++++++++++++ 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1af63e17b4ad..0818d35973ad 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -282,6 +282,7 @@ config PHYS_OFFSET default 0x30000000 if ARCH_S3C24XX default 0xa0000000 if ARCH_IOP32X || ARCH_PXA default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100 + default 0x42000000 if ARCH_IPQ806X default 0 help Please provide the physical address corresponding to the @@ -1701,7 +1702,7 @@ config CRASH_DUMP config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM - default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100) + default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100 || ARCH_IPQ806X) help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 12a812e61c16..b11b6e391ff0 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -46,4 +46,17 @@ config ARCH_MDM9615 bool "Enable support for MDM9615" select CLKSRC_QCOM +config ARCH_IPQ806X + bool "Enable support for IPQ806x" + help + Enable support for the Qualcomm IPQ806x. + + IPQ806x require special PHYS_OFFSET and can't use AUTO_ZRELADDR. + The first ~20MB of RAM is reserved for the hardware network accelerators, + and the bootloader removes this section from the layout passed from the + ATAGS (when used by some bootloader doesn't even do that). + + To support every system and handle legacy systems, hardcode PHYS_OFFSET and + disable AUTO_ZRELADDR. + endif -- 2.37.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-10-21 18:10 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-10-21 18:10 Christian Marangi [this message] 2022-10-21 18:10 ` [PATCH] ARM: mach-qcom: fix support for ipq806x Christian Marangi 2022-10-21 21:44 ` Linus Walleij 2022-10-21 21:44 ` Linus Walleij 2022-10-21 21:55 ` Christian Marangi 2022-10-21 21:55 ` Christian Marangi 2022-10-22 14:21 ` Linus Walleij 2022-10-22 14:21 ` Linus Walleij 2022-10-22 14:51 ` Jonathan McDowell 2022-10-22 14:51 ` Jonathan McDowell 2022-10-24 19:57 ` Christian Marangi 2022-10-24 19:57 ` Christian Marangi 2022-10-26 8:19 ` Linus Walleij 2022-10-26 8:19 ` Linus Walleij 2024-01-17 13:17 ` Christian Marangi 2024-01-17 13:17 ` Christian Marangi 2024-01-17 22:46 ` Christian Marangi 2024-01-17 22:46 ` Christian Marangi 2024-01-18 9:02 ` Linus Walleij 2024-01-18 9:02 ` Linus Walleij 2024-01-18 13:05 ` Christian Marangi 2024-01-18 13:05 ` Christian Marangi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221021181016.14740-1-ansuelsmth@gmail.com \ --to=ansuelsmth@gmail.com \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=ardb@kernel.org \ --cc=arnd@arndb.de \ --cc=geert+renesas@glider.be \ --cc=john@phrozen.org \ --cc=konrad.dybcio@somainline.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=nick.hawkins@hpe.com \ --cc=rmk+kernel@armlinux.org.uk \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.